Resistance using Line Losses (DC Three-Wire US) Calculator

✖Line Losses is defined as the losses that are produced in the line.ⓘ Line Losses [P_line]			+10% -10%
✖Current underground DC is defined as the current flowing through the overhead ac supply wire.ⓘ Current underground DC [C₁]			+10% -10%

✖Resistance underground DC is defined as the time rate of flow of charge through a cross-sectional area.ⓘ Resistance using Line Losses (DC Three-Wire US) [R₁]

⎘ Copy

👎

Formula

✖

Resistance using Line Losses (DC Three-Wire US)

Formula

`"R"_{"1"} = "P"_{"line"}/(2*("C"_{"1"}^2))`

Example

`"0.033333Ω"="0.6W"/(2*(("3A")^2))`

Calculator

LaTeX

Reset

👍

Download Power System Formula PDF

Resistance using Line Losses (DC Three-Wire US) Solution

STEP 0: Pre-Calculation Summary

Formula Used

Resistance underground DC = Line Losses/(2*(Current underground DC^2))
R₁ = P_line/(2*(C₁^2))
This formula uses 3 Variables

Variables Used

Resistance underground DC - (Measured in Ohm) - Resistance underground DC is defined as the time rate of flow of charge through a cross-sectional area.
Line Losses - (Measured in Watt) - Line Losses is defined as the losses that are produced in the line.
Current underground DC - (Measured in Ampere) - Current underground DC is defined as the current flowing through the overhead ac supply wire.

STEP 1: Convert Input(s) to Base Unit

Line Losses: 0.6 Watt --> 0.6 Watt No Conversion Required
Current underground DC: 3 Ampere --> 3 Ampere No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

R₁ = P_line/(2*(C₁^2)) --> 0.6/(2*(3^2))

Evaluating ... ...

R₁ = 0.0333333333333333

STEP 3: Convert Result to Output's Unit

0.0333333333333333 Ohm --> No Conversion Required

FINAL ANSWER

0.0333333333333333 ≈ 0.033333 Ohm <-- Resistance underground DC

(Calculation completed in 00.020 seconds)

You are here -

Home » Engineering » Electrical » Power System » Underground DC Supply » 3-Wire System » Resistance, Resistivity & Power » Resistance using Line Losses (DC Three-Wire US)

Credits

Created by Urvi Rathod

Vishwakarma Government Engineering College (VGEC), Ahmedabad

Urvi Rathod has created this Calculator and 1500+ more calculators!

Verified by Kethavath Srinath

Osmania University (OU), Hyderabad

Kethavath Srinath has verified this Calculator and 1200+ more calculators!

< 7 Resistance, Resistivity & Power Calculators

Power Transmitted using Area of X-Section (DC Three-Wire US)

Go Power Transmitted = sqrt(Area of underground dc wire*Line Losses*(Maximum Voltage^2)/(2*Resistivity*Length of Wire DC))

Transmitted Power using Volume of Conductor Material(DC Three-Wire US)

Go Power Transmitted = sqrt(Line Losses*Volume Of Conductor*(Maximum Voltage^2)/(5*Resistivity*(Length of Wire DC)^2))

Resistivity using Area of X-Section (DC Three-Wire US)

Go Resistivity = Area of underground dc wire*Line Losses*(Maximum Voltage^2)/(2*Length of Wire DC*(Power Transmitted^2))

Resistivity using Volume of Conductor Material(DC Three-Wire US)

Go Resistivity = Volume Of Conductor*Line Losses*(Maximum Voltage^2)/(5*(Power Transmitted*Length of Wire DC)^2)

Resistivity using Line Losses (DC Three-Wire US)

Go Resistivity = Area of underground dc wire*Line Losses/(2*Length of Wire DC*(Current underground DC^2))

Power Transmitted using Line Losses (DC Three-Wire US)

Go Power Transmitted = sqrt(Line Losses*(Maximum Voltage^2)/(2*Resistance underground DC))

Resistance using Line Losses (DC Three-Wire US)

Go Resistance underground DC = Line Losses/(2*(Current underground DC^2))

Resistance using Line Losses (DC Three-Wire US) Formula

Resistance underground DC = Line Losses/(2*(Current underground DC^2))
R₁ = P_line/(2*(C₁^2))

What is the volume of conductor material in DC Three-Wire underground system?

The volume of conductor material required in this system is 1.25 times that of a 2-wire d.c.system with the one conductor earthed.

How to Calculate Resistance using Line Losses (DC Three-Wire US)?

Resistance using Line Losses (DC Three-Wire US) calculator uses Resistance underground DC = Line Losses/(2*(Current underground DC^2)) to calculate the Resistance underground DC, The Resistance using Line Losses (DC Three-Wire US) formula is defined as a measure of the opposition to current flow in an electrical circuit. Resistance underground DC is denoted by R₁ symbol.

How to calculate Resistance using Line Losses (DC Three-Wire US) using this online calculator? To use this online calculator for Resistance using Line Losses (DC Three-Wire US), enter Line Losses (P_line) & Current underground DC (C₁) and hit the calculate button. Here is how the Resistance using Line Losses (DC Three-Wire US) calculation can be explained with given input values -> 0.033333 = 0.6/(2*(3^2)).

FAQ

What is Resistance using Line Losses (DC Three-Wire US)?

The Resistance using Line Losses (DC Three-Wire US) formula is defined as a measure of the opposition to current flow in an electrical circuit and is represented as R₁ = P_line/(2*(C₁^2)) or Resistance underground DC = Line Losses/(2*(Current underground DC^2)). Line Losses is defined as the losses that are produced in the line & Current underground DC is defined as the current flowing through the overhead ac supply wire.

How to calculate Resistance using Line Losses (DC Three-Wire US)?

The Resistance using Line Losses (DC Three-Wire US) formula is defined as a measure of the opposition to current flow in an electrical circuit is calculated using Resistance underground DC = Line Losses/(2*(Current underground DC^2)). To calculate Resistance using Line Losses (DC Three-Wire US), you need Line Losses (P_line) & Current underground DC (C₁). With our tool, you need to enter the respective value for Line Losses & Current underground DC and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search