RMS output voltage Calculator

Category	Engineering ↺
Engineering	Electronics ↺
Electronics	Power Electronics ↺
Power-Electronics	Inverters ↺
Inverters	Single phase inverters ↺

✖Input voltage is the voltage supplied to the deviceⓘ Input voltage [V_i]

+10%

-10%

✖RMS output voltage is the root mean square value of the average output voltage of the converter.ⓘ RMS output voltage [V_rms]

⎘ Copy

👎 Report Issue!

👍 Share Now!

You are here:

Devyaani Garg

Shiv Nadar University (SNU), Greater Noida

Devyaani Garg has created this Calculator and 50+ more calculators!

Nikita Suryawanshi

Vellore Institute of Technology (VIT), Vellore

Nikita Suryawanshi has verified this Calculator and 25+ more calculators!

< 11 Other formulas that you can solve using the same Inputs

Voltage across output in an amplifier

Output voltage =Open circuit voltage gain*Input voltage*(Load resistance/(Load resistance+Output resistance)) GO

Current in finite open-loop gain in operational amplifier

Electric Current=(Input voltage+Output voltage /Open Loop Gain of an Operational Amplifier)/Resistance GO

Output voltage of Finite Open-Loop Gain of an operational amplifier

Output Voltage=(Electric Current*Resistance-Input voltage)*Open Loop Gain of an Operational Amplifier GO

Output voltage of noninverting configuration

Output voltage of noninverting configuration=Input voltage+(Input voltage/Resistance)*Resistance GO

Shunt Current (LSR)

Shunt Field Current=((Input voltage-Output voltage )/Shunt field resistance)-Load current GO

Output Voltage (LSR)

Output voltage =Input voltage-(Load current+Shunt Field Current)*Shunt field resistance GO

Load Current (LSR)

Load current=(Input voltage-Output voltage /Shunt field resistance)-Shunt Field Current GO

Discharging current of dv/dt protection thyristor circuits

Discharging current of thyristor circuit=Input voltage/((Resistance+Resistance)) GO

Closed-loop gain of an operational amplifier

Closed loop gain =Output voltage /Input voltage GO

Short-Circuit Transconductance

Transconductance=output current /Input voltage GO

Open-Circuit Voltage Gain

voltage gain=Output voltage /Input voltage GO

< 6 Other formulas that calculate the same Output

RMS output voltage

RMS output voltage=((3)^0.5)*Peak input voltage*((0.75-(3*Delay angle of thyristor/720)+(0.5*(sin(2*Delay angle of thyristor))))^0.5) GO

RMS output voltage of single phase semi-converter with highly inductive load

RMS output voltage=(Peak input voltage/(2^0.5))*((180-Delay angle of thyristor)/180+(0.5/pi)*sin(2*Delay angle of thyristor))^0.5 GO

RMS output voltage of single phase thyristor converter with resistive load

RMS output voltage=(Peak input voltage/2)*((180-Delay angle of thyristor)/180+(0.5/pi)*sin(2*Delay angle of thyristor))^0.5 GO

RMS output voltage for continuous load current

RMS output voltage=((3)^0.5)*Peak input voltage*(((1/6)+(0.216/pi)*(cos(2*Delay angle of thyristor)))^0.5) GO

RMS output voltage

RMS output voltage=((6)^0.5)*Peak input voltage*((0.25+0.65*(cos(2*Delay angle of thyristor))/pi)^0.5) GO

RMS output voltage of a single phase full converter with highly inductive load

RMS output voltage=(Peak input voltage/(2^0.5)) GO

RMS output voltage Formula

RMS output voltage=((Input voltage/2))
V<sub>rms</sub>=((V<sub>i</sub>/2))

More formulas

RMS value of fundamental component of voltage for half bridge GO

RMS value of fundamental component of voltage for full bridge GO

Equivalent resistance in all three modes of operation GO

Line-to-line RMS voltage GO

RMS of fundamental component of line-to-line voltage GO

Line-to-neutral voltage GO

Time when the current becomes maximum for unidirectional switches GO

Maximum output frequency for unidirectional switches GO

Maximum output frequency for bidirectional switches GO

What is the meaning of root mean square?

The root mean square value of a quantity is the square root of the mean value of the squared values of the quantity taken over an interval. AC voltages are always given as RMS values because this allows a sensible comparison to be made with steady DC voltages.

How to Calculate RMS output voltage?

RMS output voltage calculator uses RMS output voltage=((Input voltage/2)) to calculate the RMS output voltage, The RMS output voltage formula is the root mean square value of the average output voltage of the converter. RMS output voltage and is denoted by V_rms symbol.

How to calculate RMS output voltage using this online calculator? To use this online calculator for RMS output voltage, enter Input voltage (V_i) and hit the calculate button. Here is how the RMS output voltage calculation can be explained with given input values -> 0.5 = ((1/2)).

FAQ

What is RMS output voltage?

The RMS output voltage formula is the root mean square value of the average output voltage of the converter and is represented as V_rms=((V_i/2)) or RMS output voltage=((Input voltage/2)). Input voltage is the voltage supplied to the device.

How to calculate RMS output voltage?

The RMS output voltage formula is the root mean square value of the average output voltage of the converter is calculated using RMS output voltage=((Input voltage/2)). To calculate RMS output voltage, you need Input voltage (V_i). With our tool, you need to enter the respective value for Input voltage and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate RMS output voltage?

In this formula, RMS output voltage uses Input voltage. We can use 6 other way(s) to calculate the same, which is/are as follows -

RMS output voltage=(Peak input voltage/2)*((180-Delay angle of thyristor)/180+(0.5/pi)*sin(2*Delay angle of thyristor))^0.5
RMS output voltage=(Peak input voltage/(2^0.5))*((180-Delay angle of thyristor)/180+(0.5/pi)*sin(2*Delay angle of thyristor))^0.5
RMS output voltage=(Peak input voltage/(2^0.5))
RMS output voltage=((3)^0.5)*Peak input voltage*(((1/6)+(0.216/pi)*(cos(2*Delay angle of thyristor)))^0.5)
RMS output voltage=((3)^0.5)*Peak input voltage*((0.75-(3*Delay angle of thyristor/720)+(0.5*(sin(2*Delay angle of thyristor))))^0.5)
RMS output voltage=((6)^0.5)*Peak input voltage*((0.25+0.65*(cos(2*Delay angle of thyristor))/pi)^0.5)

Facebook
Twitter
WhatsApp
Reddit
LinkedIn
E-Mail

Let Others Know

✖

Facebook

Twitter

Copied!