Resistance using Line Losses (DC Two-Wire US) Calculator

✖Line Losses is defined as the losses that are produced in the line.ⓘ Line Losses [P_line]			+10% -10%
✖Current underground DC is defined as the current flowing through the overhead ac supply wire.ⓘ Current underground DC [C₁]			+10% -10%

✖Resistance underground DC is defined as the time rate of flow of charge through a cross-sectional area.ⓘ Resistance using Line Losses (DC Two-Wire US) [R₁]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Power System Formula PDF

Resistance using Line Losses (DC Two-Wire US) Solution

STEP 0: Pre-Calculation Summary

Formula Used

Resistance underground DC = Line Losses/(2*(Current underground DC^2))
R₁ = P_line/(2*(C₁^2))
This formula uses 3 Variables

Variables Used

Resistance underground DC - (Measured in Ohm) - Resistance underground DC is defined as the time rate of flow of charge through a cross-sectional area.
Line Losses - (Measured in Watt) - Line Losses is defined as the losses that are produced in the line.
Current underground DC - (Measured in Ampere) - Current underground DC is defined as the current flowing through the overhead ac supply wire.

STEP 1: Convert Input(s) to Base Unit

Line Losses: 0.6 Watt --> 0.6 Watt No Conversion Required
Current underground DC: 3 Ampere --> 3 Ampere No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

R₁ = P_line/(2*(C₁^2)) --> 0.6/(2*(3^2))

Evaluating ... ...

R₁ = 0.0333333333333333

STEP 3: Convert Result to Output's Unit

0.0333333333333333 Ohm --> No Conversion Required

FINAL ANSWER

0.0333333333333333 ≈ 0.033333 Ohm <-- Resistance underground DC

(Calculation completed in 00.012 seconds)

You are here -

Home » Engineering » Electrical » Power System » Underground DC Supply » 2 Wire System » Power and Resistance » Resistance using Line Losses (DC Two-Wire US)

Credits

Created by Urvi Rathod

Vishwakarma Government Engineering College (VGEC), Ahmedabad

Urvi Rathod has created this Calculator and 1500+ more calculators!

Verified by Kethavath Srinath

Osmania University (OU), Hyderabad

Kethavath Srinath has verified this Calculator and 1200+ more calculators!

< Power and Resistance Calculators

Power Transmitted using Area of X-Section (DC Two-Wire US)

LaTeX Go Power Transmitted = sqrt(Area of underground dc wire*Line Losses*(Maximum Voltage^2)/(2*Resistivity*Length of Wire DC))

Resistivity using Area of X-Section (DC Two-Wire US)

LaTeX Go Resistivity = Area of underground dc wire*Line Losses*(Maximum Voltage^2)/(2*Length of Wire DC*(Power Transmitted^2))

Resistivity using Line Losses (DC Two-Wire US)

LaTeX Go Resistivity = Area of underground dc wire*Line Losses/(2*Length of Wire DC*(Current underground DC^2))

Power Transmitted using Line Losses (DC Two-Wire US)

LaTeX Go Power Transmitted = sqrt(Line Losses*(Maximum Voltage^2)/(2*Resistance underground DC))

Resistance using Line Losses (DC Two-Wire US) Formula

LaTeX Go

Resistance underground DC = Line Losses/(2*(Current underground DC^2))
R₁ = P_line/(2*(C₁^2))

What is the volume of conductor material in DC Two-Wire underground system?

The volume of conductor material required in this system is 1 times that of a 2-wire d.c.system with the one conductor earthed.

How to Calculate Resistance using Line Losses (DC Two-Wire US)?

Resistance using Line Losses (DC Two-Wire US) calculator uses Resistance underground DC = Line Losses/(2*(Current underground DC^2)) to calculate the Resistance underground DC, The Resistance using Line Losses (DC Two-Wire US) formula is defined as a measure of the opposition to current flow in an electrical circuit. Resistance underground DC is denoted by R₁ symbol.

How to calculate Resistance using Line Losses (DC Two-Wire US) using this online calculator? To use this online calculator for Resistance using Line Losses (DC Two-Wire US), enter Line Losses (P_line) & Current underground DC (C₁) and hit the calculate button. Here is how the Resistance using Line Losses (DC Two-Wire US) calculation can be explained with given input values -> 0.033333 = 0.6/(2*(3^2)).

FAQ

What is Resistance using Line Losses (DC Two-Wire US)?

The Resistance using Line Losses (DC Two-Wire US) formula is defined as a measure of the opposition to current flow in an electrical circuit and is represented as R₁ = P_line/(2*(C₁^2)) or Resistance underground DC = Line Losses/(2*(Current underground DC^2)). Line Losses is defined as the losses that are produced in the line & Current underground DC is defined as the current flowing through the overhead ac supply wire.

How to calculate Resistance using Line Losses (DC Two-Wire US)?

The Resistance using Line Losses (DC Two-Wire US) formula is defined as a measure of the opposition to current flow in an electrical circuit is calculated using Resistance underground DC = Line Losses/(2*(Current underground DC^2)). To calculate Resistance using Line Losses (DC Two-Wire US), you need Line Losses (P_line) & Current underground DC (C₁). With our tool, you need to enter the respective value for Line Losses & Current underground DC and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Spanish French German Russian Italian Portuguese Polish Dutch

Home FREE PDFs

🔍 Search