Rod Diameter of Knuckle Joint given Thickness of Eye Solution

STEP 0: Pre-Calculation Summary
Formula Used
Diameter of Rod of Knuckle Joint = Thickess of Eye of Knuckle Joint/1.25
drk = b/1.25
This formula uses 2 Variables
Variables Used
Diameter of Rod of Knuckle Joint - (Measured in Meter) - Diameter of Rod of Knuckle Joint is defined as the diameter of the end rods of a knuckle joint.
Thickess of Eye of Knuckle Joint - (Measured in Meter) - Thickess of Eye of Knuckle Joint is the thickness of the eye of the nonforked part of the knuckle joint, measured perpendicular to the eye hole radius.
STEP 1: Convert Input(s) to Base Unit
Thickess of Eye of Knuckle Joint: 40 Millimeter --> 0.04 Meter (Check conversion here)
STEP 2: Evaluate Formula
Substituting Input Values in Formula
drk = b/1.25 --> 0.04/1.25
Evaluating ... ...
drk = 0.032
STEP 3: Convert Result to Output's Unit
0.032 Meter -->32 Millimeter (Check conversion here)
FINAL ANSWER
32 Millimeter <-- Diameter of Rod of Knuckle Joint
(Calculation completed in 00.004 seconds)

Credits

Created by Saurabh Patil
Shri Govindram Seksaria Institute of Technology and Science (SGSITS ), Indore
Saurabh Patil has created this Calculator and 700+ more calculators!
Verified by Anshika Arya
National Institute Of Technology (NIT), Hamirpur
Anshika Arya has verified this Calculator and 2500+ more calculators!

5 Rod Calculators

Diameter of Rod of Knuckle Joint given Tensile Stress in Rod
Go Diameter of Rod of Knuckle Joint = sqrt((4*Load on Knuckle Joint)/(pi*Tensile Stress in Knuckle Joint Rod))
Diameter of Rod of Knuckle Joint given its Enlarged Diameter near Joint
Go Diameter of Rod of Knuckle Joint = Enlarged Diameter of Knuckle Joint Rod/1.1
Rod Diameter of Knuckle Joint given Thickness of Fork Eye
Go Diameter of Rod of Knuckle Joint = Thickess of Fork Eye of Knuckle Joint/0.75
Enlarged Diameter of Rod of Knuckle Joint near Joint
Go Enlarged Diameter of Knuckle Joint Rod = 1.1*Diameter of Rod of Knuckle Joint
Rod Diameter of Knuckle Joint given Thickness of Eye
Go Diameter of Rod of Knuckle Joint = Thickess of Eye of Knuckle Joint/1.25

Rod Diameter of Knuckle Joint given Thickness of Eye Formula

Diameter of Rod of Knuckle Joint = Thickess of Eye of Knuckle Joint/1.25
drk = b/1.25

What is difference between crushing and buckling?

Crushing means breaking and failure of short column structure when subjected to high compressive stress and Buckling is failure of long column structure when subjected to high buckling stress.

How to Calculate Rod Diameter of Knuckle Joint given Thickness of Eye?

Rod Diameter of Knuckle Joint given Thickness of Eye calculator uses Diameter of Rod of Knuckle Joint = Thickess of Eye of Knuckle Joint/1.25 to calculate the Diameter of Rod of Knuckle Joint, The Rod diameter of knuckle joint given thickness of eye is the diameter of the rod at the ends of the fork and the eye of the knuckle joint. Diameter of Rod of Knuckle Joint is denoted by drk symbol.

How to calculate Rod Diameter of Knuckle Joint given Thickness of Eye using this online calculator? To use this online calculator for Rod Diameter of Knuckle Joint given Thickness of Eye, enter Thickess of Eye of Knuckle Joint (b) and hit the calculate button. Here is how the Rod Diameter of Knuckle Joint given Thickness of Eye calculation can be explained with given input values -> 32000 = 0.04/1.25.

FAQ

What is Rod Diameter of Knuckle Joint given Thickness of Eye?
The Rod diameter of knuckle joint given thickness of eye is the diameter of the rod at the ends of the fork and the eye of the knuckle joint and is represented as drk = b/1.25 or Diameter of Rod of Knuckle Joint = Thickess of Eye of Knuckle Joint/1.25. Thickess of Eye of Knuckle Joint is the thickness of the eye of the nonforked part of the knuckle joint, measured perpendicular to the eye hole radius.
How to calculate Rod Diameter of Knuckle Joint given Thickness of Eye?
The Rod diameter of knuckle joint given thickness of eye is the diameter of the rod at the ends of the fork and the eye of the knuckle joint is calculated using Diameter of Rod of Knuckle Joint = Thickess of Eye of Knuckle Joint/1.25. To calculate Rod Diameter of Knuckle Joint given Thickness of Eye, you need Thickess of Eye of Knuckle Joint (b). With our tool, you need to enter the respective value for Thickess of Eye of Knuckle Joint and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
How many ways are there to calculate Diameter of Rod of Knuckle Joint?
In this formula, Diameter of Rod of Knuckle Joint uses Thickess of Eye of Knuckle Joint. We can use 3 other way(s) to calculate the same, which is/are as follows -
  • Diameter of Rod of Knuckle Joint = sqrt((4*Load on Knuckle Joint)/(pi*Tensile Stress in Knuckle Joint Rod))
  • Diameter of Rod of Knuckle Joint = Enlarged Diameter of Knuckle Joint Rod/1.1
  • Diameter of Rod of Knuckle Joint = Thickess of Fork Eye of Knuckle Joint/0.75
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!