Sample Area given Resistivity Calculator

Search
Home	Chemistry ↺
Chemistry	Polymer Chemistry ↺
Polymer Chemistry	Step-wise Polymerization ↺

✖Resistivity is the measure of how strongly a material opposes the flow of current through them.ⓘ Resistivity [ρ]			+10% -10%
✖Thickness of Sample is the measure of the distance between two surfaces of an sample, usually the smallest of three dimensions.ⓘ Thickness of Sample [L]			+10% -10%
✖Resistance is a measure of the opposition to current flow in an electrical circuit. Its S.I unit is ohm.ⓘ Resistance [R]			+10% -10%

✖Sample Area is defined as the space occupied by the surface of a sample.ⓘ Sample Area given Resistivity [A_sample]

⎘ Copy

👎

Formula

✖

Sample Area given Resistivity

Formula

`"A"_{"sample"} = "ρ"*("L"/"R")`

Example

`"3.5E^-5m²"="0.000017Ω*m"*("21m"/"10.1Ω")`

Calculator

LaTeX

Reset

👍

Sample Area given Resistivity Solution

STEP 0: Pre-Calculation Summary

Formula Used

Sample Area = Resistivity*(Thickness of Sample/Resistance)
A_sample = ρ*(L/R)
This formula uses 4 Variables

Variables Used

Sample Area - (Measured in Square Meter) - Sample Area is defined as the space occupied by the surface of a sample.
Resistivity - (Measured in Ohm Meter) - Resistivity is the measure of how strongly a material opposes the flow of current through them.
Thickness of Sample - (Measured in Meter) - Thickness of Sample is the measure of the distance between two surfaces of an sample, usually the smallest of three dimensions.
Resistance - (Measured in Ohm) - Resistance is a measure of the opposition to current flow in an electrical circuit. Its S.I unit is ohm.

STEP 1: Convert Input(s) to Base Unit

Resistivity: 1.7E-05 Ohm Meter --> 1.7E-05 Ohm Meter No Conversion Required
Thickness of Sample: 21 Meter --> 21 Meter No Conversion Required
Resistance: 10.1 Ohm --> 10.1 Ohm No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

A_sample = ρ*(L/R) --> 1.7E-05*(21/10.1)

Evaluating ... ...

A_sample = 3.53465346534654E-05

STEP 3: Convert Result to Output's Unit

3.53465346534654E-05 Square Meter --> No Conversion Required

FINAL ANSWER

3.53465346534654E-05 Square Meter <-- Sample Area

(Calculation completed in 00.000 seconds)

You are here -

Home » Chemistry » Polymer Chemistry » Step-wise Polymerization » Sample Area given Resistivity

Credits

Created by Pratibha

Amity Institute Of Applied Sciences (AIAS, Amity University), Noida, India

Pratibha has created this Calculator and 100+ more calculators!

Verified by Soupayan banerjee

National University of Judicial Science (NUJS), Kolkata

Soupayan banerjee has verified this Calculator and 400+ more calculators!

< 8 Step-wise Polymerization Calculators

Orientation Time of Polymer

Go Orientation Time = Pre-Exponential Factor*(exp(Activation Energy/([R]*Temperature)))

Flory-Huggins Interaction Parameter

Go Flory-Huggins Interaction Parameter = (Lattice Coordination Number*Change in Enthalpy)/([Molar-g]*Temperature)

Weight Average Degree Polymerization

Go Weight Average Degree Polymerization = Weight-Average Molecular Weight/Weight Average Molecular Weight in Crosslink Site

Specific Resistance of Pellet

Go Specific Resistance = Resistance*(Pellet Area/Pellet Thickness)

Sample Area given Resistivity

Go Sample Area = Resistivity*(Thickness of Sample/Resistance)

Solubility Parameter given Heat of Vaporization for Nonpolar Solvents

Go Solubility Parameter = sqrt(Heat of Vaporization/Volume)

Heat of vaporization given Solubility Parameter

Go Heat of Vaporization = (Solubility Parameter)^2*Volume

Volume given Solubility Parameter

Go Volume = Heat of Vaporization/(Solubility Parameter)^2

Sample Area given Resistivity Formula

Sample Area = Resistivity*(Thickness of Sample/Resistance)
A_sample = ρ*(L/R)

What is resistivity?

Resistivity, electrical resistance of a conductor of unit cross-sectional area and unit length. A characteristic property of each material, resistivity is useful in comparing various materials on the basis of their ability to conduct electric currents. High resistivity designates poor conductors.

How to Calculate Sample Area given Resistivity?

Sample Area given Resistivity calculator uses Sample Area = Resistivity*(Thickness of Sample/Resistance) to calculate the Sample Area, Sample Area given Resistivity formula is defined as the space occupied by a flat shape or the surface of a sample. Sample Area is denoted by A_sample symbol.

How to calculate Sample Area given Resistivity using this online calculator? To use this online calculator for Sample Area given Resistivity, enter Resistivity (ρ), Thickness of Sample (L) & Resistance (R) and hit the calculate button. Here is how the Sample Area given Resistivity calculation can be explained with given input values -> 3.5E-5 = 1.7E-05*(21/10.1).

FAQ

What is Sample Area given Resistivity?

Sample Area given Resistivity formula is defined as the space occupied by a flat shape or the surface of a sample and is represented as A_sample = ρ*(L/R) or Sample Area = Resistivity*(Thickness of Sample/Resistance). Resistivity is the measure of how strongly a material opposes the flow of current through them, Thickness of Sample is the measure of the distance between two surfaces of an sample, usually the smallest of three dimensions & Resistance is a measure of the opposition to current flow in an electrical circuit. Its S.I unit is ohm.

How to calculate Sample Area given Resistivity?

Sample Area given Resistivity formula is defined as the space occupied by a flat shape or the surface of a sample is calculated using Sample Area = Resistivity*(Thickness of Sample/Resistance). To calculate Sample Area given Resistivity, you need Resistivity (ρ), Thickness of Sample (L) & Resistance (R). With our tool, you need to enter the respective value for Resistivity, Thickness of Sample & Resistance and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Facebook
Twitter
WhatsApp
Reddit
LinkedIn
E-Mail

Let Others Know

✖

Facebook

Twitter

Copied!