Sampling Period Solution

STEP 0: Pre-Calculation Summary
Formula Used
Sampling Period = 1/Sampling Frequency
Ts = 1/fs
This formula uses 2 Variables
Variables Used
Sampling Period - (Measured in Second) - Sampling Period refers to the time interval between successive samples taken from an analog signal to convert it into a discrete digital representation.
Sampling Frequency - (Measured in Hertz) - Sampling frequency is defined as the number of samples per second in a sound.
STEP 1: Convert Input(s) to Base Unit
Sampling Frequency: 0.3 Kilohertz --> 300 Hertz (Check conversion here)
STEP 2: Evaluate Formula
Substituting Input Values in Formula
Ts = 1/fs --> 1/300
Evaluating ... ...
Ts = 0.00333333333333333
STEP 3: Convert Result to Output's Unit
0.00333333333333333 Second -->3333.33333333333 Microsecond (Check conversion here)
FINAL ANSWER
3333.33333333333 3333.333 Microsecond <-- Sampling Period
(Calculation completed in 00.004 seconds)

Credits

Created by Akshada Kulkarni
National Institute of Information Technology (NIIT), Neemrana
Akshada Kulkarni has created this Calculator and 500+ more calculators!
Verified by Team Softusvista
Softusvista Office (Pune), India
Team Softusvista has verified this Calculator and 1100+ more calculators!

14 Modulation Techniques Calculators

Bandwidth of Multilevel FSK
Go Bandwidth of Multilevel FSK = Bit Rate*(1+Rolloff Factor)+(2*Difference in Frequency*(Number of Level-1))
Bandwidth of Multilevel PSK
Go Bandwidth of Multilevel PSK = Bit Rate*((1+Rolloff Factor)/(log2(Number of Level)))
Probability Error of BPSK for Raised Cosine Filter
Go Probability Error of BPSK = (1/2)*erfc(sqrt(Energy per Symbol/Noise Density))
Bandwidth of FSK
Go Bandwidth of FSK = Bit Rate*(1+Rolloff Factor)+(2*Difference in Frequency)
Bandwidth of ASK given Bit Rate
Go Bandwidth of ASK = (1+Rolloff Factor)*(Bit Rate/Number of Bits)
Rolloff Factor
Go Rolloff Factor = ((Bandwidth of ASK*Number of Bits)/Bit Rate)-1
Bandwidth of Raised Cosine Filter
Go Bandwidth of Raised Cosine Filter = (1+Rolloff Factor)/(2*Signal Time Period)
Signal Time Period
Go Signal Time Period = (1+Rolloff Factor)/(2*Bandwidth of Raised Cosine Filter)
Probability Error of DPSK
Go Probability Error of DPSK = (1/2)*e^(-(Energy per Bit/Noise Density))
Bandwidth Efficiency in Digital Communication
Go Bandwidth Efficiency = Bit Rate/Signal Bandwidth
Symbol Time
Go Symbol Time = Bit Rate/Bits Conveyed Per Symbol
Baud Rate
Go Baud Rate = Bit Rate/Number of Bits
Sampling Theorem
Go Sampling Frequency = 2*Maximum Frequency
Sampling Period
Go Sampling Period = 1/Sampling Frequency

Sampling Period Formula

Sampling Period = 1/Sampling Frequency
Ts = 1/fs

What is sampling period?

Sampling period is samples of the output sample signal that are maintained with a gap.
It is the inverse of the sampling frequency.
In other words, it is the time interval in which sampling can be performed by measuring the value of the continuous signal every T seconds.

How to Calculate Sampling Period?

Sampling Period calculator uses Sampling Period = 1/Sampling Frequency to calculate the Sampling Period, The sampling period refers to the time interval between successive samples taken from an analog signal to convert it into a discrete digital representation. It is a fundamental parameter that determines the rate at which the continuous analog signal is measured and converted into a series of discrete samples. Sampling Period is denoted by Ts symbol.

How to calculate Sampling Period using this online calculator? To use this online calculator for Sampling Period, enter Sampling Frequency (fs) and hit the calculate button. Here is how the Sampling Period calculation can be explained with given input values -> 3.3E+9 = 1/300.

FAQ

What is Sampling Period?
The sampling period refers to the time interval between successive samples taken from an analog signal to convert it into a discrete digital representation. It is a fundamental parameter that determines the rate at which the continuous analog signal is measured and converted into a series of discrete samples and is represented as Ts = 1/fs or Sampling Period = 1/Sampling Frequency. Sampling frequency is defined as the number of samples per second in a sound.
How to calculate Sampling Period?
The sampling period refers to the time interval between successive samples taken from an analog signal to convert it into a discrete digital representation. It is a fundamental parameter that determines the rate at which the continuous analog signal is measured and converted into a series of discrete samples is calculated using Sampling Period = 1/Sampling Frequency. To calculate Sampling Period, you need Sampling Frequency (fs). With our tool, you need to enter the respective value for Sampling Frequency and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!