Signal frequency Solution

STEP 0: Pre-Calculation Summary
Formula Used
Signal Frequency = Pumping Frequency/(Power Gain of Modulator-1)
fs = fp/(Gm-1)
This formula uses 3 Variables
Variables Used
Signal Frequency - (Measured in Hertz) - Signal frequency is defined as the frequency of a signal that is containing information.
Pumping Frequency - (Measured in Hertz) - Pumping frequency is the number of occurrences of a repeating event per unit of time.
Power Gain of Modulator - (Measured in Decibel) - Power gain of modulator is defined as is the ratio of an output power to an input power.
STEP 1: Convert Input(s) to Base Unit
Pumping Frequency: 220 Hertz --> 220 Hertz No Conversion Required
Power Gain of Modulator: 3.315 Decibel --> 3.315 Decibel No Conversion Required
STEP 2: Evaluate Formula
Substituting Input Values in Formula
fs = fp/(Gm-1) --> 220/(3.315-1)
Evaluating ... ...
fs = 95.0323974082073
STEP 3: Convert Result to Output's Unit
95.0323974082073 Hertz --> No Conversion Required
FINAL ANSWER
95.0323974082073 95.0324 Hertz <-- Signal Frequency
(Calculation completed in 00.004 seconds)

Credits

Created by Shobhit Dimri
Bipin Tripathi Kumaon Institute of Technology (BTKIT), Dwarahat
Shobhit Dimri has created this Calculator and 900+ more calculators!
Verified by Urvi Rathod
Vishwakarma Government Engineering College (VGEC), Ahmedabad
Urvi Rathod has verified this Calculator and 1900+ more calculators!

13 Parametric Devices Calculators

Power Gain of Down-Converter
Go Power Gain Down-Converter = (4*Idler Frequency*Output Resistance of Idler Generator*Output Resistance of Signal Generator*Ratio Negative Resistance to Series Resistance)/(Signal Frequency*Total Series Resistance at Signal Frequency*Total Series Resistance at Idler Frequency*(1-Ratio Negative Resistance to Series Resistance)^2)
Output Resistance of Signal Generator
Go Output Resistance of Signal Generator = (Gain of NRPA*Signal Frequency*Total Series Resistance at Signal Frequency*Total Series Resistance at Idler Frequency*(1-Ratio Negative Resistance to Series Resistance)^2)/(4*Signal Frequency*Output Resistance of Idler Generator*Ratio Negative Resistance to Series Resistance)
Noise Figure of Parametric Up-Converter
Go Noise Figure of Up-Converter = 1+((2*Diode Temperature)/(Coupling Coefficient*Q-Factor of Up-Converter*Ambient Temperature)+2/(Ambient Temperature*(Coupling Coefficient*Q-Factor of Up-Converter)^2))
Bandwidth of Negative Resistance Parametric Amplifier (NRPA)
Go Bandwidth of NRPA = (Coupling Coefficient/2)*sqrt(Idler Frequency/(Signal Frequency*Gain of NRPA))
Bandwidth of Parametric Up-Converter
Go Bandwidth of Up-Converter = 2*Coupling Coefficient*sqrt(Output Frequency/Signal Frequency)
Output Frequency in Up-Convertor
Go Output Frequency = (Power Gain for Up-Converter/Gain Degradation Factor)*Signal Frequency
Power Gain for Parametric Up-Converter
Go Power Gain for Up-Converter = (Output Frequency/Signal Frequency)*Gain Degradation Factor
Gain-Degradation Factor
Go Gain Degradation Factor = (Signal Frequency/Output Frequency)*Power Gain for Up-Converter
Pumping Frequency using Demodulator Gain
Go Pumping Frequency = (Signal Frequency/Power Gain of Demodulator)-Signal Frequency
Power Gain of Demodulator
Go Power Gain of Demodulator = Signal Frequency/(Pumping Frequency+Signal Frequency)
Power Gain of Modulator
Go Power Gain of Modulator = (Pumping Frequency+Signal Frequency)/Signal Frequency
Signal frequency
Go Signal Frequency = Pumping Frequency/(Power Gain of Modulator-1)
Idler Frequency using Pumping Frequency
Go Idler Frequency = Pumping Frequency-Signal Frequency

Signal frequency Formula

Signal Frequency = Pumping Frequency/(Power Gain of Modulator-1)
fs = fp/(Gm-1)

What are non-reciprocal devices ?

The devices which are having the properties that the forward characteristics are not equal to the reverse characteristics are called non-reciprocal devices.

How to Calculate Signal frequency?

Signal frequency calculator uses Signal Frequency = Pumping Frequency/(Power Gain of Modulator-1) to calculate the Signal Frequency, The Signal frequency formula is defined as the frequency of a signal that is containing information. Signal Frequency is denoted by fs symbol.

How to calculate Signal frequency using this online calculator? To use this online calculator for Signal frequency, enter Pumping Frequency (fp) & Power Gain of Modulator (Gm) and hit the calculate button. Here is how the Signal frequency calculation can be explained with given input values -> 95.0324 = 220/(3.315-1) .

FAQ

What is Signal frequency?
The Signal frequency formula is defined as the frequency of a signal that is containing information and is represented as fs = fp/(Gm-1) or Signal Frequency = Pumping Frequency/(Power Gain of Modulator-1). Pumping frequency is the number of occurrences of a repeating event per unit of time & Power gain of modulator is defined as is the ratio of an output power to an input power.
How to calculate Signal frequency?
The Signal frequency formula is defined as the frequency of a signal that is containing information is calculated using Signal Frequency = Pumping Frequency/(Power Gain of Modulator-1). To calculate Signal frequency, you need Pumping Frequency (fp) & Power Gain of Modulator (Gm). With our tool, you need to enter the respective value for Pumping Frequency & Power Gain of Modulator and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!