Slant Height of Cone given Total Surface Area and Base Circumference Calculator

✖Total Surface Area of Cone is defined as the total quantity of plane enclosed on the entire surface of the Cone.ⓘ Total Surface Area of Cone [TSA]			+10% -10%
✖Base Circumference of Cone is the total length of the boundary of the base circular surface of the Cone.ⓘ Base Circumference of Cone [C_Base]			+10% -10%

✖Slant Height of Cone is the length of the line segment joining the apex of the Cone to any point on the circumference of the circular base of the Cone.ⓘ Slant Height of Cone given Total Surface Area and Base Circumference [h_Slant]

⎘ Copy

👎

Formula

✖

Slant Height of Cone given Total Surface Area and Base Circumference

Formula

`"h"_{"Slant"} = (2*"TSA")/"C"_{"Base"}-"C"_{"Base"}/(2*pi)`

Example

`"12.61737m"=(2*"665m²")/"60m"-"60m"/(2*pi)`

Calculator

LaTeX

Reset

👍

Download Cone Formula PDF PDF Image

Slant Height of Cone given Total Surface Area and Base Circumference Solution

STEP 0: Pre-Calculation Summary

Formula Used

Slant Height of Cone = (2*Total Surface Area of Cone)/Base Circumference of Cone-Base Circumference of Cone/(2*pi)
h_Slant = (2*TSA)/C_Base-C_Base/(2*pi)
This formula uses 1 Constants, 3 Variables

Constants Used

pi - Archimedes' constant Value Taken As 3.14159265358979323846264338327950288

Variables Used

Slant Height of Cone - (Measured in Meter) - Slant Height of Cone is the length of the line segment joining the apex of the Cone to any point on the circumference of the circular base of the Cone.
Total Surface Area of Cone - (Measured in Square Meter) - Total Surface Area of Cone is defined as the total quantity of plane enclosed on the entire surface of the Cone.
Base Circumference of Cone - (Measured in Meter) - Base Circumference of Cone is the total length of the boundary of the base circular surface of the Cone.

STEP 1: Convert Input(s) to Base Unit

Total Surface Area of Cone: 665 Square Meter --> 665 Square Meter No Conversion Required
Base Circumference of Cone: 60 Meter --> 60 Meter No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

h_Slant = (2*TSA)/C_Base-C_Base/(2*pi) --> (2*665)/60-60/(2*pi)

Evaluating ... ...

h_Slant = 12.6173700811529

STEP 3: Convert Result to Output's Unit

12.6173700811529 Meter --> No Conversion Required

FINAL ANSWER

12.6173700811529 ≈ 12.61737 Meter <-- Slant Height of Cone

(Calculation completed in 00.004 seconds)

You are here -

Home » Math » Geometry » 3D Geometry » Cone » Cone » Slant Height of Cone » Slant Height of Cone given Total Surface Area and Base Circumference

Credits

Created by Dhruv Walia

Indian Institute of Technology, Indian School of Mines, DHANBAD (IIT ISM), Dhanbad, Jharkhand

Dhruv Walia has created this Calculator and 1100+ more calculators!

Verified by Nikita Kumari

The National Institute of Engineering (NIE), Mysuru

Nikita Kumari has verified this Calculator and 600+ more calculators!

< 13 Slant Height of Cone Calculators

Slant Height of Cone given Total Surface Area and Base Area

Go Slant Height of Cone = Total Surface Area of Cone/sqrt(pi*Base Area of Cone)-sqrt(Base Area of Cone/pi)

Slant Height of Cone given Volume and Base Circumference

Go Slant Height of Cone = sqrt(((3*Volume of Cone)/(Base Circumference of Cone^2/(4*pi)))^2+(Base Circumference of Cone/(2*pi))^2)

Slant Height of Cone given Volume

Go Slant Height of Cone = sqrt(((3*Volume of Cone)/(pi*Base Radius of Cone^2))^2+Base Radius of Cone^2)

Slant Height of Cone given Volume and Base Area

Go Slant Height of Cone = sqrt(((3*Volume of Cone)/Base Area of Cone)^2+Base Area of Cone/pi)

Slant Height of Cone given Total Surface Area and Base Circumference

Go Slant Height of Cone = (2*Total Surface Area of Cone)/Base Circumference of Cone-Base Circumference of Cone/(2*pi)

Slant Height of Cone given Volume and Height

Go Slant Height of Cone = sqrt(Height of Cone^2+(3*Volume of Cone)/(pi*Height of Cone))

Slant Height of Cone given Total Surface Area

Go Slant Height of Cone = Total Surface Area of Cone/(pi*Base Radius of Cone)-Base Radius of Cone

Slant Height of Cone given Height and Base Circumference

Go Slant Height of Cone = sqrt(Height of Cone^2+(Base Circumference of Cone/(2*pi))^2)

Slant Height of Cone given Lateral Surface Area and Base Area

Go Slant Height of Cone = Lateral Surface Area of Cone/sqrt(pi*Base Area of Cone)

Slant Height of Cone given Height and Base Area

Go Slant Height of Cone = sqrt(Height of Cone^2+Base Area of Cone/pi)

Slant Height of Cone given Lateral Surface Area

Go Slant Height of Cone = Lateral Surface Area of Cone/(pi*Base Radius of Cone)

Slant Height of Cone

Go Slant Height of Cone = sqrt(Height of Cone^2+Base Radius of Cone^2)

Slant Height of Cone given Lateral Surface Area and Base Circumference

Go Slant Height of Cone = (2*Lateral Surface Area of Cone)/Base Circumference of Cone

Slant Height of Cone given Total Surface Area and Base Circumference Formula

Slant Height of Cone = (2*Total Surface Area of Cone)/Base Circumference of Cone-Base Circumference of Cone/(2*pi)
h_Slant = (2*TSA)/C_Base-C_Base/(2*pi)

What is a Cone?

A Cone is obtained by rotating a line inclined at a fixed acute angle from a fixed axis of rotation. The sharp tip is called the apex of the Cone. If the rotating line is crossing the axis of rotation, then the resulting shape is a double-napped Cone - two oppositely placed Cones joined on the apex. Cutting a Cone by a plane will result in some important two-dimensional shapes like circles, ellipses, parabolas, and hyperbolas, depending on the angle of cutting.

How to Calculate Slant Height of Cone given Total Surface Area and Base Circumference?

Slant Height of Cone given Total Surface Area and Base Circumference calculator uses Slant Height of Cone = (2*Total Surface Area of Cone)/Base Circumference of Cone-Base Circumference of Cone/(2*pi) to calculate the Slant Height of Cone, The Slant Height of Cone given Total Surface Area and Base Circumference formula is defined as the length of the line segment joining the apex of the Cone to any point on the circumference of the circular base of the Cone, and calculated using the total surface area and base circumference of the Cone. Slant Height of Cone is denoted by h_Slant symbol.

How to calculate Slant Height of Cone given Total Surface Area and Base Circumference using this online calculator? To use this online calculator for Slant Height of Cone given Total Surface Area and Base Circumference, enter Total Surface Area of Cone (TSA) & Base Circumference of Cone (C_Base) and hit the calculate button. Here is how the Slant Height of Cone given Total Surface Area and Base Circumference calculation can be explained with given input values -> 12.61737 = (2*665)/60-60/(2*pi).

FAQ

What is Slant Height of Cone given Total Surface Area and Base Circumference?

The Slant Height of Cone given Total Surface Area and Base Circumference formula is defined as the length of the line segment joining the apex of the Cone to any point on the circumference of the circular base of the Cone, and calculated using the total surface area and base circumference of the Cone and is represented as h_Slant = (2*TSA)/C_Base-C_Base/(2*pi) or Slant Height of Cone = (2*Total Surface Area of Cone)/Base Circumference of Cone-Base Circumference of Cone/(2*pi). Total Surface Area of Cone is defined as the total quantity of plane enclosed on the entire surface of the Cone & Base Circumference of Cone is the total length of the boundary of the base circular surface of the Cone.

How to calculate Slant Height of Cone given Total Surface Area and Base Circumference?

The Slant Height of Cone given Total Surface Area and Base Circumference formula is defined as the length of the line segment joining the apex of the Cone to any point on the circumference of the circular base of the Cone, and calculated using the total surface area and base circumference of the Cone is calculated using Slant Height of Cone = (2*Total Surface Area of Cone)/Base Circumference of Cone-Base Circumference of Cone/(2*pi). To calculate Slant Height of Cone given Total Surface Area and Base Circumference, you need Total Surface Area of Cone (TSA) & Base Circumference of Cone (C_Base). With our tool, you need to enter the respective value for Total Surface Area of Cone & Base Circumference of Cone and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Slant Height of Cone?

In this formula, Slant Height of Cone uses Total Surface Area of Cone & Base Circumference of Cone. We can use 12 other way(s) to calculate the same, which is/are as follows -

Slant Height of Cone = Lateral Surface Area of Cone/(pi*Base Radius of Cone)
Slant Height of Cone = Total Surface Area of Cone/(pi*Base Radius of Cone)-Base Radius of Cone
Slant Height of Cone = sqrt(Height of Cone^2+Base Radius of Cone^2)
Slant Height of Cone = sqrt(((3*Volume of Cone)/(pi*Base Radius of Cone^2))^2+Base Radius of Cone^2)
Slant Height of Cone = sqrt(Height of Cone^2+Base Area of Cone/pi)
Slant Height of Cone = sqrt(Height of Cone^2+(Base Circumference of Cone/(2*pi))^2)
Slant Height of Cone = sqrt(((3*Volume of Cone)/Base Area of Cone)^2+Base Area of Cone/pi)
Slant Height of Cone = sqrt(((3*Volume of Cone)/(Base Circumference of Cone^2/(4*pi)))^2+(Base Circumference of Cone/(2*pi))^2)
Slant Height of Cone = sqrt(Height of Cone^2+(3*Volume of Cone)/(pi*Height of Cone))
Slant Height of Cone = Lateral Surface Area of Cone/sqrt(pi*Base Area of Cone)
Slant Height of Cone = (2*Lateral Surface Area of Cone)/Base Circumference of Cone
Slant Height of Cone = Total Surface Area of Cone/sqrt(pi*Base Area of Cone)-sqrt(Base Area of Cone/pi)

Home

FREE PDFs

🔍 Search