Rithik Agrawal
National Institute of Technology Karnataka (NITK), Surathkal
Rithik Agrawal has created this Calculator and 400+ more calculators!
M Naveen
National Institute of Technology (NIT), Warangal
M Naveen has verified this Calculator and 100+ more calculators!

11 Other formulas that you can solve using the same Inputs

Tension at Supports for UDL on Parabolic Cable is Given
Tension at Supports=sqrt((Midspan Tension^2)+(Uniformly Distributed Load*Length of Cable/2)^2) GO
Tension at Supports when Catenary Parameter for UDL on Catenary Parabolic Cable is Given
Tension at Supports=(Maximum Sag+Catenary Parameter)*Uniformly Distributed Load GO
UDL when Catenary Parameter for UDL on Catenary Parabolic Cable is Given
Uniformly Distributed Load=Tension at Supports/(Maximum Sag+Catenary Parameter) GO
Catenary Parameter for UDL on Catenary Parabolic Cable
Catenary Parameter=(Tension at Supports/Uniformly Distributed Load)-Maximum Sag GO
Maximum Sag when Tension at Midspan for UDL on Parabolic Cable is Given
Maximum Sag=Uniformly Distributed Load*(Length of Cable^2)/(8*Midspan Tension) GO
UDL when Tension at Midspan for UDL on Parabolic Cable is Given
Uniformly Distributed Load=8*Midspan Tension*Maximum Sag/(Length of Cable^2) GO
Tension at Midspan for UDL on Parabolic Cable
Midspan Tension=(Uniformly Distributed Load*(Cable Span^2))/(8*Maximum Sag) GO
Span of Cable when Tension at Midspan for UDL on Parabolic Cable is Given
Cable Span=sqrt(8*Midspan Tension*Maximum Sag/Uniformly Distributed Load) GO
Total Sag when Catenary Parameter for UDL on Catenary Parabolic Cable is Given
Sag of Cable at Midway between Supports=Maximum Sag+Catenary Parameter GO
Length of Cable for UDL on Parabolic Cable is Given
Length of Cable=Cable Span+8*(Maximum Sag^2)/(3*Cable Span) GO
Maximum Sag when Length of Cable for UDL on Parabolic Cable is Given
Maximum Sag=(Length of Cable-Cable Span)*(3/8)*Cable Span GO

8 Other formulas that calculate the same Output

Catenary Length measured from the Low Point of the Simple Cable with a UDL
Cable Span=(Midspan Tension/Uniformly Distributed Load)*sinh(Uniformly Distributed Load*Distance from Midpoint of Cable/Midspan Tension) GO
Span of Cable when Natural frequency of each Cable is Given
Cable Span=(Fundamental Vibration Mode*pi/Natural frequency)*sqrt(Maximum Tension/[g]*Uniformly Distributed Load) GO
Span Length when Horizontal Component of Cable Tension for UDL is Given
Cable Span=sqrt(8*Sag of Cable at Midway between Supports*Midspan Tension)/Uniformly Distributed Load GO
Span of Cable when Tension at Supports for UDL on Parabolic Cable is Given
Cable Span=(sqrt((Tension at Supports^2)-(Midspan Tension^2))*2)/total uniformly distributed load GO
Catenary Length when Tension at any Point of the Simple Cable with a UDL is Given
Cable Span=sqrt(((Tension at Supports^2)-(Midspan Tension^2))/(Uniformly Distributed Load^2)) GO
Span of Cable when Tension at Midspan for UDL on Parabolic Cable is Given
Cable Span=sqrt(8*Midspan Tension*Maximum Sag/Uniformly Distributed Load) GO
Span Length when Vertical Reaction at Supports is Given
Cable Span=Vertical Reaction at Supports*2/Uniformly Distributed Load GO
Span of Cable when Catenary Parameter for UDL on Catenary Parabolic Cable is Given
Cable Span=2*Catenary Parameter GO

Span of Cable when Length of Cable for UDL on Parabolic Cable is Given Formula

Cable Span=1.5*Length of Cable-sqrt((2.25*Length of Cable^2)-8*(Maximum Sag^2))
L=1.5*S-sqrt((2.25*S^2)-8*(d^2))
More formulas
Allowable Stress for Compression Elements for Highway Bridges GO
Tension at Midspan for UDL on Parabolic Cable GO
Span of Cable when Tension at Midspan for UDL on Parabolic Cable is Given GO
Maximum Sag when Tension at Midspan for UDL on Parabolic Cable is Given GO
Tension at Supports for UDL on Parabolic Cable is Given GO
Tension at Midspan when Tension at Supports for UDL on Parabolic Cable is Given GO
UDL when Tension at Supports for UDL on Parabolic Cable is Given GO
Span of Cable when Tension at Supports for UDL on Parabolic Cable is Given GO
Length of Cable for UDL on Parabolic Cable is Given GO
Maximum Sag when Length of Cable for UDL on Parabolic Cable is Given GO
Parabolic Equation for the Cable Slope GO

What is Cable Span ?

Cable Span is the aerial distance between two poles or towers, meaning the physical resistance of the jacket to support its own weight.

How to Calculate Span of Cable when Length of Cable for UDL on Parabolic Cable is Given?

Span of Cable when Length of Cable for UDL on Parabolic Cable is Given calculator uses Cable Span=1.5*Length of Cable-sqrt((2.25*Length of Cable^2)-8*(Maximum Sag^2)) to calculate the Cable Span, The Span of Cable when Length of Cable for UDL on Parabolic Cable is Given is defined as total projected horizontal length of cable. Cable Span and is denoted by L symbol.

How to calculate Span of Cable when Length of Cable for UDL on Parabolic Cable is Given using this online calculator? To use this online calculator for Span of Cable when Length of Cable for UDL on Parabolic Cable is Given, enter Length of Cable (S) and Maximum Sag (d) and hit the calculate button. Here is how the Span of Cable when Length of Cable for UDL on Parabolic Cable is Given calculation can be explained with given input values -> NaN = 1.5*10-sqrt((2.25*10^2)-8*(10^2)).

FAQ

What is Span of Cable when Length of Cable for UDL on Parabolic Cable is Given?
The Span of Cable when Length of Cable for UDL on Parabolic Cable is Given is defined as total projected horizontal length of cable and is represented as L=1.5*S-sqrt((2.25*S^2)-8*(d^2)) or Cable Span=1.5*Length of Cable-sqrt((2.25*Length of Cable^2)-8*(Maximum Sag^2)). Length of Cable is the length measured along the catenary of cable and Maximum Sag is defined as maximum catenary formed in cable.
How to calculate Span of Cable when Length of Cable for UDL on Parabolic Cable is Given?
The Span of Cable when Length of Cable for UDL on Parabolic Cable is Given is defined as total projected horizontal length of cable is calculated using Cable Span=1.5*Length of Cable-sqrt((2.25*Length of Cable^2)-8*(Maximum Sag^2)). To calculate Span of Cable when Length of Cable for UDL on Parabolic Cable is Given, you need Length of Cable (S) and Maximum Sag (d). With our tool, you need to enter the respective value for Length of Cable and Maximum Sag and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
How many ways are there to calculate Cable Span?
In this formula, Cable Span uses Length of Cable and Maximum Sag. We can use 8 other way(s) to calculate the same, which is/are as follows -
  • Cable Span=sqrt(8*Midspan Tension*Maximum Sag/Uniformly Distributed Load)
  • Cable Span=(sqrt((Tension at Supports^2)-(Midspan Tension^2))*2)/total uniformly distributed load
  • Cable Span=2*Catenary Parameter
  • Cable Span=(Midspan Tension/Uniformly Distributed Load)*sinh(Uniformly Distributed Load*Distance from Midpoint of Cable/Midspan Tension)
  • Cable Span=sqrt(((Tension at Supports^2)-(Midspan Tension^2))/(Uniformly Distributed Load^2))
  • Cable Span=sqrt(8*Sag of Cable at Midway between Supports*Midspan Tension)/Uniformly Distributed Load
  • Cable Span=Vertical Reaction at Supports*2/Uniformly Distributed Load
  • Cable Span=(Fundamental Vibration Mode*pi/Natural frequency)*sqrt(Maximum Tension/[g]*Uniformly Distributed Load)
Share Image
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!