## Specific Heat Capacity in Thermochemical Equation Solution

STEP 0: Pre-Calculation Summary
Formula Used
Specific Heat Capacity = Heat Transfer/(Mass*Change in Temperature)
c = q/(Mflight path*∆T)
This formula uses 4 Variables
Variables Used
Specific Heat Capacity - (Measured in Joule per Kilogram per K) - Specific Heat Capacity is the heat required to raise the temperature of the unit mass of a given substance by a given amount.
Heat Transfer - (Measured in Watt) - Heat Transfer is the amount of heat that is transferred per unit of time in some material, usually measured in watts (joules per second).
Mass - (Measured in Kilogram) - Mass is the quantity of matter in a body regardless of its volume or of any forces acting on it.
Change in Temperature - (Measured in Kelvin) - The Change in Temperature is the difference between the initial and final temperature.
STEP 1: Convert Input(s) to Base Unit
Heat Transfer: 17.2 Watt --> 17.2 Watt No Conversion Required
Mass: 35.45 Kilogram --> 35.45 Kilogram No Conversion Required
Change in Temperature: 50 Kelvin --> 50 Kelvin No Conversion Required
STEP 2: Evaluate Formula
Substituting Input Values in Formula
c = q/(Mflight path*∆T) --> 17.2/(35.45*50)
Evaluating ... ...
c = 0.00970380818053596
STEP 3: Convert Result to Output's Unit
0.00970380818053596 Joule per Kilogram per K -->9.70380818053596E-06 Kilojoule per Kilogram per K (Check conversion here)
9.70380818053596E-06 Kilojoule per Kilogram per K <-- Specific Heat Capacity
(Calculation completed in 00.000 seconds)
You are here -
Home »

## Credits

Created by Soupayan banerjee
National University of Judicial Science (NUJS), Kolkata
Soupayan banerjee has created this Calculator and 200+ more calculators!
Verified by Prerana Bakli
National Institute of Technology (NIT), Meghalaya
Prerana Bakli has verified this Calculator and 1300+ more calculators!

## < 9 Thermochemistry Calculators

Molal Heat of Vaporization given Rate of Pressure Change
Molal Heat of Vaporization = (Change in Pressure*(Molar Volume-Molal Liquid Volume)*Absolute Temperature)/Change in Temperature
Specific Heat Capacity in Thermochemical Equation
Specific Heat Capacity = Heat Transfer/(Mass*Change in Temperature)
Heat Transfer in Thermochemical Reaction
Heat Transfer = Mass*Specific Heat Capacity*Change in Temperature
Change in Enthalpy of Vaporization
Change in Enthalpy of Vaporization = Enthalpy of gas state-Enthalpy of liquid state
Amount of Heat Released in Bomb Calorimetry
Heat Transfer in Reaction = -Heat Capacity of Calorimetry*Change in Temperature
Change in Internal Energy of Thermochemical System
Change in Internal Energy = Final Potential Energy-Initial Potential Energy
Amount of Heat released in Constant-Volume Calorimetry
Heat Transfer = -(Heat Capacity*Change in Temperature)
Change in Temperature in Calorimetry
Change in Temperature = -(Heat Transfer/Heat Capacity)
Heat Capacity in Calorimetry
Heat Capacity = Heat/Difference in Temperature

## Specific Heat Capacity in Thermochemical Equation Formula

Specific Heat Capacity = Heat Transfer/(Mass*Change in Temperature)
c = q/(Mflight path*∆T)

## What is Thermochemistry?

Thermochemistry is the study of the heat energy which is associated with chemical reactions and/or phase changes such as melting and boiling. A reaction may release or absorb energy, and a phase change may do the same. Thermochemistry focuses on the energy exchange between a system and its surroundings in the form of heat. Thermochemistry is useful in predicting reactant and product quantities throughout the course of a given reaction. In combination with entropy determinations, it is also used to predict whether a reaction is spontaneous or non-spontaneous, favorable or unfavorable

## How to Calculate Specific Heat Capacity in Thermochemical Equation?

Specific Heat Capacity in Thermochemical Equation calculator uses Specific Heat Capacity = Heat Transfer/(Mass*Change in Temperature) to calculate the Specific Heat Capacity, The Specific Heat Capacity in Thermochemical Equation formula is defined as s the heat capacity of a sample of the substance divided by the mass of the sample. Informally, it is the amount of heat that must be added to one unit of mass of the substance in order to cause an increase of one unit in temperature. Specific Heat Capacity is denoted by c symbol.

How to calculate Specific Heat Capacity in Thermochemical Equation using this online calculator? To use this online calculator for Specific Heat Capacity in Thermochemical Equation, enter Heat Transfer (q), Mass (Mflight path) & Change in Temperature (∆T) and hit the calculate button. Here is how the Specific Heat Capacity in Thermochemical Equation calculation can be explained with given input values -> 9.7E-6 = 17.2/(35.45*50).

### FAQ

What is Specific Heat Capacity in Thermochemical Equation?
The Specific Heat Capacity in Thermochemical Equation formula is defined as s the heat capacity of a sample of the substance divided by the mass of the sample. Informally, it is the amount of heat that must be added to one unit of mass of the substance in order to cause an increase of one unit in temperature and is represented as c = q/(Mflight path*∆T) or Specific Heat Capacity = Heat Transfer/(Mass*Change in Temperature). Heat Transfer is the amount of heat that is transferred per unit of time in some material, usually measured in watts (joules per second), Mass is the quantity of matter in a body regardless of its volume or of any forces acting on it & The Change in Temperature is the difference between the initial and final temperature.
How to calculate Specific Heat Capacity in Thermochemical Equation?
The Specific Heat Capacity in Thermochemical Equation formula is defined as s the heat capacity of a sample of the substance divided by the mass of the sample. Informally, it is the amount of heat that must be added to one unit of mass of the substance in order to cause an increase of one unit in temperature is calculated using Specific Heat Capacity = Heat Transfer/(Mass*Change in Temperature). To calculate Specific Heat Capacity in Thermochemical Equation, you need Heat Transfer (q), Mass (Mflight path) & Change in Temperature (∆T). With our tool, you need to enter the respective value for Heat Transfer, Mass & Change in Temperature and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
Let Others Know