Standard gauge length for UTM test specimen Calculator

✖Column Cross Sectional Area is the area of a two-dimensional shape that is obtained when a three dimensional shape is sliced perpendicular to some specified axis at a point.ⓘ Column Cross Sectional Area [A_sectional]

+10%

-10%

✖Gauge Length for Test Specimen is defined as the length of part of test specimen for which change in length is to be noted.ⓘ Standard gauge length for UTM test specimen [L]

⎘ Copy

👎

Formula

✖

Standard gauge length for UTM test specimen

Formula

`"L" = 5.65*("A"_{"sectional"}^0.5)`

Example

`"6685.17mm"=5.65*(("1.4m²")^0.5)`

Calculator

LaTeX

Reset

👍

Download Strength of Materials Formula PDF

Standard gauge length for UTM test specimen Solution

STEP 0: Pre-Calculation Summary

Formula Used

Gauge Length for Test Specimen = 5.65*(Column Cross Sectional Area^0.5)
L = 5.65*(A_sectional^0.5)
This formula uses 2 Variables

Variables Used

Gauge Length for Test Specimen - (Measured in Meter) - Gauge Length for Test Specimen is defined as the length of part of test specimen for which change in length is to be noted.
Column Cross Sectional Area - (Measured in Square Meter) - Column Cross Sectional Area is the area of a two-dimensional shape that is obtained when a three dimensional shape is sliced perpendicular to some specified axis at a point.

STEP 1: Convert Input(s) to Base Unit

Column Cross Sectional Area: 1.4 Square Meter --> 1.4 Square Meter No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

L = 5.65*(A_sectional^0.5) --> 5.65*(1.4^0.5)

Evaluating ... ...

L = 6.68517015490257

STEP 3: Convert Result to Output's Unit

6.68517015490257 Meter -->6685.17015490257 Millimeter (Check conversion here)

FINAL ANSWER

6685.17015490257 ≈ 6685.17 Millimeter <-- Gauge Length for Test Specimen

(Calculation completed in 00.004 seconds)

You are here -

Home » Physics » Strength of Materials » Direct And Bending Stress » Standard gauge length for UTM test specimen

Credits

Created by Saurabh Patil

Shri Govindram Seksaria Institute of Technology and Science (SGSITS ), Indore

Saurabh Patil has created this Calculator and 700+ more calculators!

Verified by Ankush shivhare

Motilal Nehru National Institute of Technology Allahabad (MNNIT), Prayagraj UP

Ankush shivhare has verified this Calculator and 5 more calculators!

< 1 Direct And Bending Stress Calculators

Standard gauge length for UTM test specimen

Go Gauge Length for Test Specimen = 5.65*(Column Cross Sectional Area^0.5)

Standard gauge length for UTM test specimen Formula

Gauge Length for Test Specimen = 5.65*(Column Cross Sectional Area^0.5)
L = 5.65*(A_sectional^0.5)

What is a UTM?

A universal testing machine (UTM), also known as a universal tester, materials testing machine or materials test frame, is used to test the tensile strength and compressive strength of materials. An earlier name for a tensile testing machine is a tensometer. The "universal" part of the name reflects that it can perform many standard tensile and compression tests on materials, components, and structures (in other words, that it is versatile).

How to Calculate Standard gauge length for UTM test specimen?

Standard gauge length for UTM test specimen calculator uses Gauge Length for Test Specimen = 5.65*(Column Cross Sectional Area^0.5) to calculate the Gauge Length for Test Specimen, The Standard gauge length for UTM test specimen formula is defined as the length of part of the test specimen for which change in length is to be noted. Gauge Length for Test Specimen is denoted by L symbol.

How to calculate Standard gauge length for UTM test specimen using this online calculator? To use this online calculator for Standard gauge length for UTM test specimen, enter Column Cross Sectional Area (A_sectional) and hit the calculate button. Here is how the Standard gauge length for UTM test specimen calculation can be explained with given input values -> 6.7E+6 = 5.65*(1.4^0.5).

FAQ

What is Standard gauge length for UTM test specimen?

The Standard gauge length for UTM test specimen formula is defined as the length of part of the test specimen for which change in length is to be noted and is represented as L = 5.65*(A_sectional^0.5) or Gauge Length for Test Specimen = 5.65*(Column Cross Sectional Area^0.5). Column Cross Sectional Area is the area of a two-dimensional shape that is obtained when a three dimensional shape is sliced perpendicular to some specified axis at a point.

How to calculate Standard gauge length for UTM test specimen?

The Standard gauge length for UTM test specimen formula is defined as the length of part of the test specimen for which change in length is to be noted is calculated using Gauge Length for Test Specimen = 5.65*(Column Cross Sectional Area^0.5). To calculate Standard gauge length for UTM test specimen, you need Column Cross Sectional Area (A_sectional). With our tool, you need to enter the respective value for Column Cross Sectional Area and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search