Steel Yield Strength on Pins subject to Rotation for Bridges for LFD given Pin Stress Solution

STEP 0: Pre-Calculation Summary
Formula Used
Yield Strength of Steel = Allowable Bearing Stresses on Pins/0.40
fy = Fp/0.40
This formula uses 2 Variables
Variables Used
Yield Strength of Steel - (Measured in Pascal) - Yield strength of steel is the level of stress that corresponds to the yield point.
Allowable Bearing Stresses on Pins - (Measured in Pascal) - Allowable Bearing Stresses on Pins is the maximum bearing stress that can be applied to the pins such that it is safe against instability due to shear failure.
STEP 1: Convert Input(s) to Base Unit
Allowable Bearing Stresses on Pins: 175 Megapascal --> 175000000 Pascal (Check conversion here)
STEP 2: Evaluate Formula
Substituting Input Values in Formula
fy = Fp/0.40 --> 175000000/0.40
Evaluating ... ...
fy = 437500000
STEP 3: Convert Result to Output's Unit
437500000 Pascal -->437.5 Megapascal (Check conversion here)
FINAL ANSWER
437.5 Megapascal <-- Yield Strength of Steel
(Calculation completed in 00.004 seconds)

Credits

Created by Rithik Agrawal
National Institute of Technology Karnataka (NITK), Surathkal
Rithik Agrawal has created this Calculator and 1300+ more calculators!
Verified by Mithila Muthamma PA
Coorg Institute of Technology (CIT), Coorg
Mithila Muthamma PA has verified this Calculator and 700+ more calculators!

5 Steel Yield Strength Calculators

Steel Yield Strength for Braced Non-Compact Section for LFD given Maximum Unbraced Length
Go Yield Strength of Steel = (20000*Flange Area)/(Maximum Unbraced Length*Depth of Section)
Steel Yield Strength for Compact Section for LFD given Minimum Flange Thickness
Go Yield Strength of Steel = (65*Flange Minimum Thickness/Width of Projection of Flange)^2
Steel Yield Strength on Pins not Subject to Rotation for Bridges for LFD given Pin Stress
Go Yield Strength of Steel = Allowable Bearing Stresses on Pins/0.80
Steel Yield Strength on Pins subject to Rotation for Bridges for LFD given Pin Stress
Go Yield Strength of Steel = Allowable Bearing Stresses on Pins/0.40
Steel Yield Strength on Pins for Buildings for LFD given Allowable Bearing Stress
Go Yield Strength of Steel = Allowable Bearing Stresses on Pins/0.90

Steel Yield Strength on Pins subject to Rotation for Bridges for LFD given Pin Stress Formula

Yield Strength of Steel = Allowable Bearing Stresses on Pins/0.40
fy = Fp/0.40

What is Steel Yield Strength?

Yield strength is the maximum stress that can be applied before it begins to change shape permanently. This is an approximation of the elastic limit of the steel. If stress is added to the metal but does not reach the yield point, it will return to its original shape after the stress is removed

What is Load Factor Design (LFD)?

Load Factor Design (LFD), the first limit-states design approach, was developed as a method for proportioning structural members for multiples of the design loads to satisfy specified structural performance requirements.

How to Calculate Steel Yield Strength on Pins subject to Rotation for Bridges for LFD given Pin Stress?

Steel Yield Strength on Pins subject to Rotation for Bridges for LFD given Pin Stress calculator uses Yield Strength of Steel = Allowable Bearing Stresses on Pins/0.40 to calculate the Yield Strength of Steel, The Steel Yield Strength on Pins subject to Rotation for Bridges for LFD given Pin Stress formula is defined as the strength at which steel behaves linearly with strain under uniform loading. Yield Strength of Steel is denoted by fy symbol.

How to calculate Steel Yield Strength on Pins subject to Rotation for Bridges for LFD given Pin Stress using this online calculator? To use this online calculator for Steel Yield Strength on Pins subject to Rotation for Bridges for LFD given Pin Stress, enter Allowable Bearing Stresses on Pins (Fp) and hit the calculate button. Here is how the Steel Yield Strength on Pins subject to Rotation for Bridges for LFD given Pin Stress calculation can be explained with given input values -> 0.000438 = 175000000/0.40.

FAQ

What is Steel Yield Strength on Pins subject to Rotation for Bridges for LFD given Pin Stress?
The Steel Yield Strength on Pins subject to Rotation for Bridges for LFD given Pin Stress formula is defined as the strength at which steel behaves linearly with strain under uniform loading and is represented as fy = Fp/0.40 or Yield Strength of Steel = Allowable Bearing Stresses on Pins/0.40. Allowable Bearing Stresses on Pins is the maximum bearing stress that can be applied to the pins such that it is safe against instability due to shear failure.
How to calculate Steel Yield Strength on Pins subject to Rotation for Bridges for LFD given Pin Stress?
The Steel Yield Strength on Pins subject to Rotation for Bridges for LFD given Pin Stress formula is defined as the strength at which steel behaves linearly with strain under uniform loading is calculated using Yield Strength of Steel = Allowable Bearing Stresses on Pins/0.40. To calculate Steel Yield Strength on Pins subject to Rotation for Bridges for LFD given Pin Stress, you need Allowable Bearing Stresses on Pins (Fp). With our tool, you need to enter the respective value for Allowable Bearing Stresses on Pins and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
How many ways are there to calculate Yield Strength of Steel?
In this formula, Yield Strength of Steel uses Allowable Bearing Stresses on Pins. We can use 4 other way(s) to calculate the same, which is/are as follows -
  • Yield Strength of Steel = (20000*Flange Area)/(Maximum Unbraced Length*Depth of Section)
  • Yield Strength of Steel = (65*Flange Minimum Thickness/Width of Projection of Flange)^2
  • Yield Strength of Steel = Allowable Bearing Stresses on Pins/0.90
  • Yield Strength of Steel = Allowable Bearing Stresses on Pins/0.80
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!