Surface Tension Given Gibbs Free Energy Calculator

⤿

Capillarity and Surface Forces in Liquids (Curved Surfaces)

BET Adsorption Isotherm

Colloidal Structures in Surfactant Solutions

Freundlich adsorption isotherm

Important Formulas of Adsorption Isotherm

Important Formulas of Colloids

Important Formulas on Surface Tension

Langmuir Adsorption Isotherm

⤿

Surface Tension

Laplace and Surface Pressure

Parachor

Surface Pressure

Wilhelmy-Plate Method

✖Gibbs Free Energy is a thermodynamic potential that can be used to calculate the maximum of reversible work that may be performed by a thermodynamic system at a constant temperature and pressure.ⓘ Gibbs Free Energy [G]			+10% -10%
✖The Area of Surface is the surface of the object where the drag force takes place due to the boundary layer.ⓘ Area of Surface [A]			+10% -10%

✖Surface Tension of Fluid is the energy or work required to increase the surface area of a fluid due to intermolecular forces.ⓘ Surface Tension Given Gibbs Free Energy [γ]

⎘ Copy

👎

Formula

✖

Surface Tension Given Gibbs Free Energy

Formula

`"γ" = "G"/"A"`

Example

`"22861mN/m"="228.61J"/"10m²"`

Calculator

LaTeX

Reset

👍

Download Capillarity and Surface Forces in Liquids (Curved Surfaces) Formula PDF PDF Image

Surface Tension Given Gibbs Free Energy Solution

STEP 0: Pre-Calculation Summary

Formula Used

Surface Tension of Fluid = Gibbs Free Energy/Area of Surface
γ = G/A
This formula uses 3 Variables

Variables Used

Surface Tension of Fluid - (Measured in Newton per Meter) - Surface Tension of Fluid is the energy or work required to increase the surface area of a fluid due to intermolecular forces.
Gibbs Free Energy - (Measured in Joule) - Gibbs Free Energy is a thermodynamic potential that can be used to calculate the maximum of reversible work that may be performed by a thermodynamic system at a constant temperature and pressure.
Area of Surface - (Measured in Square Meter) - The Area of Surface is the surface of the object where the drag force takes place due to the boundary layer.

STEP 1: Convert Input(s) to Base Unit

Gibbs Free Energy: 228.61 Joule --> 228.61 Joule No Conversion Required
Area of Surface: 10 Square Meter --> 10 Square Meter No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

γ = G/A --> 228.61/10

Evaluating ... ...

γ = 22.861

STEP 3: Convert Result to Output's Unit

22.861 Newton per Meter -->22861 Millinewton per Meter (Check conversion here)

FINAL ANSWER

22861 Millinewton per Meter <-- Surface Tension of Fluid

(Calculation completed in 00.004 seconds)

You are here -

Home » Chemistry » Surface Chemistry » Capillarity and Surface Forces in Liquids (Curved Surfaces) » Surface Tension » Surface Tension Given Gibbs Free Energy

Credits

Created by Pratibha

Amity Institute Of Applied Sciences (AIAS, Amity University), Noida, India

Pratibha has created this Calculator and 100+ more calculators!

Verified by Prerana Bakli

University of Hawaiʻi at Mānoa (UH Manoa), Hawaii, USA

Prerana Bakli has verified this Calculator and 1600+ more calculators!

< 20 Surface Tension Calculators

Surface Tension given Contact Angle

Go Surface Tension of Fluid = (2*Radius of Curvature*Density of Fluid*[g]*Height of Capillary Rise/Fall)*(1/cos(Contact Angle))

Surface Tension of Sea Water

Go Surface Tension of Sea Water = Surface Tension of Pure Water*(1+(3.766*10^(-4)*Reference Salinity)+(2.347*10^(-6)*Reference Salinity*Temperature in Degree Celsius))

Surface Tension Given Maximum Volume

Go Surface Tension = (Volume*Change in Density*[g]*Correction Factor)/(2*pi*Capillary Radius)

Surface Tension given Molecular Weight

Go Surface Tension of Fluid = [EOTVOS_C]*(Critical Temperature-Temperature-6)/(Molecular Weight/Density of Liquid)^(2/3)

Surface Tension of Pure Water

Go Surface Tension of Pure Water = 235.8*(1-(Temperature/Critical Temperature))^(1.256)*(1-(0.625*(1-(Temperature/Critical Temperature))))

Surface Tension given Critical Temperature

Go Surface Tension of Fluid given Critical Temp = Constant for each Liquid*(1-(Temperature/Critical Temperature))^(Empirical Factor)

Surface Tension given Correction Factor

Go Surface Tension of Fluid = (Drop Weight*[g])/(2*pi*Capillary Radius*Correction Factor)

Surface Tension given Molar Volume

Go Surface Tension of Fluid given Molar Volume = [EOTVOS_C]*(Critical Temperature-Temperature)/(Molar Volume)^(2/3)

Height of Magnitude of Capillary Rise

Go Height of Capillary Rise/Fall = Surface Tension of Fluid/((1/2)*(Radius of Tubing*Density of Fluid*[g]))

Surface Tension Force given Density of Fluid

Go Surface Tension of Fluid = (1/2)*(Radius of Tubing*Density of Fluid*[g]*Height of Capillary Rise/Fall)

Surface Tension Given Density of Vapor

Go Surface Tension of Fluid = Characteristic Constant*(Density of Liquid-Density of Vapor)^4

Surface Tension given Temperature

Go Surface Tension of Fluid given Temperature = 75.69-(0.1413*Temperature)-(0.0002985*(Temperature)^2)

Surface Tension Given Force

Go Surface Tension of Fluid = Force/(4*pi*Radius of Ring)

Work of Cohesion given Surface Tension

Go Work of Cohesion = 2*Surface Tension of Fluid*[Avaga-no]^(1/3)*(Molar Volume)^(2/3)

Solubility Parameter Given Surface Tension

Go Solubility Parameter = 4.1*(Surface Tension of Fluid/(Molar Volume)^(1/3))^(0.43)

Surface Tension for very Thin Plate using Wilhelmy-Plate Method

Go Surface Tension of Fluid = Force on very Thin Plate/(2*Weight of Plate)

Surface Tension Given Gibbs Free Energy

Go Surface Tension of Fluid = Gibbs Free Energy/Area of Surface

Gibbs Free Energy Given Surface Area

Go Gibbs Free Energy = Surface Tension of Fluid*Area of Surface

Surface Tension of Methane+Hexane System

Go Surface Tension of Methane+Hexane System = 0.64+(17.85*Concentration of Hexane)

Surface Tension of Liquid Methane

Go Surface Tension of Liquid Methane = 40.52*(1-(Temperature/190.55))^1.287

Surface Tension Given Gibbs Free Energy Formula

Surface Tension of Fluid = Gibbs Free Energy/Area of Surface
γ = G/A

What do you understand by surface tension of liquid?

In the case of the liquid/gas interface, the resultant force acting on the surface molecules from the liquid side exceeds that from the gas side. Surface molecules of the liquid are therefore drawn into the liquid phase, whose surface area tends to diminish. As a consequence of interactions among liquid molecules, the force-directed normal to the surface into the liquid is accompanied by another force-directed tangentially to the surface and preventing its area from increasing. This latter force per unit length (the cross-section of the surface is a line) is a measure of the surface tension (denoted by γ or σ).

How to Calculate Surface Tension Given Gibbs Free Energy?

Surface Tension Given Gibbs Free Energy calculator uses Surface Tension of Fluid = Gibbs Free Energy/Area of Surface to calculate the Surface Tension of Fluid, The Surface Tension Given Gibbs Free Energy formula represents the work necessary to form unit area of new surface or, equivalently, the increase of Gibbs free energy corresponding to the formation of the unit area of the surface. Surface Tension of Fluid is denoted by γ symbol.

How to calculate Surface Tension Given Gibbs Free Energy using this online calculator? To use this online calculator for Surface Tension Given Gibbs Free Energy, enter Gibbs Free Energy (G) & Area of Surface (A) and hit the calculate button. Here is how the Surface Tension Given Gibbs Free Energy calculation can be explained with given input values -> 2.3E+7 = 228.61/10.

FAQ

What is Surface Tension Given Gibbs Free Energy?

The Surface Tension Given Gibbs Free Energy formula represents the work necessary to form unit area of new surface or, equivalently, the increase of Gibbs free energy corresponding to the formation of the unit area of the surface and is represented as γ = G/A or Surface Tension of Fluid = Gibbs Free Energy/Area of Surface. Gibbs Free Energy is a thermodynamic potential that can be used to calculate the maximum of reversible work that may be performed by a thermodynamic system at a constant temperature and pressure & The Area of Surface is the surface of the object where the drag force takes place due to the boundary layer.

How to calculate Surface Tension Given Gibbs Free Energy?

The Surface Tension Given Gibbs Free Energy formula represents the work necessary to form unit area of new surface or, equivalently, the increase of Gibbs free energy corresponding to the formation of the unit area of the surface is calculated using Surface Tension of Fluid = Gibbs Free Energy/Area of Surface. To calculate Surface Tension Given Gibbs Free Energy, you need Gibbs Free Energy (G) & Area of Surface (A). With our tool, you need to enter the respective value for Gibbs Free Energy & Area of Surface and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Surface Tension of Fluid?

In this formula, Surface Tension of Fluid uses Gibbs Free Energy & Area of Surface. We can use 7 other way(s) to calculate the same, which is/are as follows -

Surface Tension of Fluid = (1/2)*(Radius of Tubing*Density of Fluid*[g]*Height of Capillary Rise/Fall)
Surface Tension of Fluid = [EOTVOS_C]*(Critical Temperature-Temperature-6)/(Molecular Weight/Density of Liquid)^(2/3)
Surface Tension of Fluid = Force/(4*pi*Radius of Ring)
Surface Tension of Fluid = Characteristic Constant*(Density of Liquid-Density of Vapor)^4
Surface Tension of Fluid = (2*Radius of Curvature*Density of Fluid*[g]*Height of Capillary Rise/Fall)*(1/cos(Contact Angle))
Surface Tension of Fluid = (Drop Weight*[g])/(2*pi*Capillary Radius*Correction Factor)
Surface Tension of Fluid = Force on very Thin Plate/(2*Weight of Plate)

Home

FREE PDFs

🔍 Search