Temperature Difference Achieved given Thermal Expansion and Length of Tubes in Heat Exchanger Calculator

✖Thermal expansion refers to the tendency of material to change its size, shape, or volume in response to a change in temperature.ⓘ Thermal Expansion [ΔL]			+10% -10%
✖Length of tube is the length which will be used during heat transfer in a exchanger.ⓘ Length of Tube [L_Tube]			+10% -10%

✖Temperature Difference is the change in temperature of fluid passing through a heat exchanger.ⓘ Temperature Difference Achieved given Thermal Expansion and Length of Tubes in Heat Exchanger [ΔT_C]

⎘ Copy

👎

Formula

✖

Temperature Difference Achieved given Thermal Expansion and Length of Tubes in Heat Exchanger

Formula

`"ΔT"_{"C"} = "ΔL"/((97.1*10^-6)*"L"_{"Tube"})`

Example

`"41.00011K"="17.915mm"/((97.1*10^-6)*"4500mm")`

Calculator

LaTeX

Reset

👍

Download Heat Exchangers Formula PDF PDF Image

Temperature Difference Achieved given Thermal Expansion and Length of Tubes in Heat Exchanger Solution

STEP 0: Pre-Calculation Summary

Formula Used

Temperature Difference = Thermal Expansion/((97.1*10^-6)*Length of Tube)
ΔT_C = ΔL/((97.1*10^-6)*L_Tube)
This formula uses 3 Variables

Variables Used

Temperature Difference - (Measured in Kelvin) - Temperature Difference is the change in temperature of fluid passing through a heat exchanger.
Thermal Expansion - (Measured in Meter) - Thermal expansion refers to the tendency of material to change its size, shape, or volume in response to a change in temperature.
Length of Tube - (Measured in Meter) - Length of tube is the length which will be used during heat transfer in a exchanger.

STEP 1: Convert Input(s) to Base Unit

Thermal Expansion: 17.915 Millimeter --> 0.017915 Meter (Check conversion here)
Length of Tube: 4500 Millimeter --> 4.5 Meter (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

ΔT_C = ΔL/((97.1*10^-6)*L_Tube) --> 0.017915/((97.1*10^-6)*4.5)

Evaluating ... ...

ΔT_C = 41.0001144295686

STEP 3: Convert Result to Output's Unit

41.0001144295686 Kelvin --> No Conversion Required

FINAL ANSWER

41.0001144295686 ≈ 41.00011 Kelvin <-- Temperature Difference

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Chemical Engineering » Process Equipment Design » Heat Exchangers » Basic Formulas Of Heat Exchanger Designs » Temperature Difference Achieved given Thermal Expansion and Length of Tubes in Heat Exchanger

Credits

Created by Rishi Vadodaria

Malviya National Institute Of Technology (MNIT JAIPUR ), JAIPUR

Rishi Vadodaria has created this Calculator and 200+ more calculators!

Verified by Vaibhav Mishra

DJ Sanghvi College of Engineering (DJSCE), Mumbai

Vaibhav Mishra has verified this Calculator and 200+ more calculators!

< 25 Basic Formulas Of Heat Exchanger Designs Calculators

Pressure Drop of Vapor in Condensers given Vapors on Shell Side

Go Shell Side Pressure Drop = 0.5*8*Friction Factor*(Length of Tube/Baffle Spacing)*(Shell Diameter/Equivalent Diameter)*(Fluid Density/2)*(Fluid Velocity^2)*((Fluid Viscosity at Bulk Temperature/Fluid Viscosity at Wall Temperature)^-0.14)

Shell Side Pressure Drop in Heat Exchanger

Go Shell Side Pressure Drop = (8*Friction Factor*(Length of Tube/Baffle Spacing)*(Shell Diameter/Equivalent Diameter))*(Fluid Density/2)*(Fluid Velocity^2)*((Fluid Viscosity at Bulk Temperature/Fluid Viscosity at Wall Temperature)^-0.14)

Tube Side Pressure Drop in Heat Exchanger for Turbulent Flow

Go Tube Side Pressure Drop = Number of Tube-Side Passes*(8*Friction Factor*(Length of Tube/Pipe Inner Diameter)*(Fluid Viscosity at Bulk Temperature/Fluid Viscosity at Wall Temperature)^-0.14+2.5)*(Fluid Density/2)*(Fluid Velocity^2)

Tube Side Pressure Drop in Heat Exchanger for Laminar Flow

Reynolds Number for Condensate Film Outside Vertical Tubes in Heat Exchanger

Go Reynold Number = 4*Mass Flowrate/(pi*Pipe Outer Diameter*Number of Tubes*Fluid Viscosity at Bulk Temperature)

Reynolds Number for Condensate Film Inside Vertical Tubes in Condenser

Go Reynold Number = 4*Mass Flowrate/(pi*Pipe Inner Diameter*Number of Tubes*Fluid Viscosity at Bulk Temperature)

Number of Tubes in Shell and Tube Heat Exchanger

Go Number of Tubes = 4*Mass Flowrate/(Fluid Density*Fluid Velocity*pi*(Pipe Inner Diameter)^2)

Shell Area for Heat Exchanger

Go Shell Area = (Tube Pitch-Pipe Outer Diameter)*Shell Diameter*(Baffle Spacing/Tube Pitch)

Stack Design Pressure Draft for Furnace

Go Draft Pressure = 0.0342*(Stack Height)*Atmospheric Pressure*(1/Ambient Temperature-1/Flue Gas Temperature)

Number of Transfer Units for Plate Heat Exchanger

Go Number of Transfer Units = (Outlet Temperature-Inlet Temperature)/Log Mean Temperature Difference

Equivalent Diameter for Triangular Pitch in Heat Exchanger

Go Equivalent Diameter = (1.10/Pipe Outer Diameter)*((Tube Pitch^2)-0.917*(Pipe Outer Diameter^2))

Equivalent Diameter for Square Pitch in Heat Exchanger

Go Equivalent Diameter = (1.27/Pipe Outer Diameter)*((Tube Pitch^2)-0.785*(Pipe Outer Diameter^2))

Viscosity Correction Factor for Shell and Tube Heat Exchanger

Go Viscosity Correction Factor = (Fluid Viscosity at Bulk Temperature/Fluid Viscosity at Wall Temperature)^0.14

Pumping Power Required in Heat Exchanger Given Pressure Drop

Go Pumping Power = (Mass Flowrate*Tube Side Pressure Drop)/Fluid Density

Heat Exchanger Volume for Hydrocarbon Applications

Go Heat Exchanger Volume = (Heat Duty of Heat Exchanger/Log Mean Temperature Difference)/100000

Heat Exchanger Volume for Air Separation Applications

Go Heat Exchanger Volume = (Heat Duty of Heat Exchanger/Log Mean Temperature Difference)/50000

Provision for Thermal Expansion and Contraction in Heat Exchanger

Go Thermal Expansion = (97.1*10^-6)*Length of Tube*Temperature Difference

Number of Tubes in Eight Pass Triangular Pitch given Bundle Diameter

Go Number of Tubes = 0.0365*(Bundle Diameter/Pipe Outer Diameter)^2.675

Number of Tubes in Six Pass Triangular Pitch given Bundle Diameter

Go Number of Tubes = 0.0743*(Bundle Diameter/Pipe Outer Diameter)^2.499

Number of Tubes in Four Pass Triangular Pitch given Bundle Diameter

Go Number of Tubes = 0.175*(Bundle Diameter/Pipe Outer Diameter)^2.285

Number of Tubes in One Pass Triangular Pitch given Bundle Diameter

Go Number of Tubes = 0.319*(Bundle Diameter/Pipe Outer Diameter)^2.142

Number of Tubes in Two Pass Triangular Pitch given Bundle Diameter

Go Number of Tubes = 0.249*(Bundle Diameter/Pipe Outer Diameter)^2.207

Number of Tubes in Center Row Given Bundle Diameter and Tube Pitch

Go Number of Tubes in Vertical Tube Row = Bundle Diameter/Tube Pitch

Number of Baffles in Shell and Tube Heat Exchanger

Go Number of Baffles = (Length of Tube/Baffle Spacing)-1

Shell Diameter of Heat Exchanger Given Clearance and Bundle Diameter

Go Shell Diameter = Shell Clearance+Bundle Diameter

Temperature Difference Achieved given Thermal Expansion and Length of Tubes in Heat Exchanger Formula

Temperature Difference = Thermal Expansion/((97.1*10^-6)*Length of Tube)
ΔT_C = ΔL/((97.1*10^-6)*L_Tube)

What is Thermal Expansion and Contraction in Heat Exchanger?

Thermal expansion and contraction in a heat exchanger refer to the changes in the size, shape, or volume of the heat exchanger components as a result of temperature variations during its operation. A heat exchanger is designed to transfer thermal energy from one fluid (usually hot) to another fluid (usually cold). When hot fluid flows through the heat exchanger, it heats up the heat exchanger's components, causing them to expand. Conversely, when the heat exchanger cools down after the hot fluid has passed through, its components contract.

How to Calculate Temperature Difference Achieved given Thermal Expansion and Length of Tubes in Heat Exchanger?

Temperature Difference Achieved given Thermal Expansion and Length of Tubes in Heat Exchanger calculator uses Temperature Difference = Thermal Expansion/((97.1*10^-6)*Length of Tube) to calculate the Temperature Difference, The Temperature Difference Achieved given Thermal Expansion and Length of Tubes in Heat Exchanger formula is defined as the change in temperature achieved by the fluid which is passed through a shell and tube Heat Exchanger. Temperature Difference is denoted by ΔT_C symbol.

How to calculate Temperature Difference Achieved given Thermal Expansion and Length of Tubes in Heat Exchanger using this online calculator? To use this online calculator for Temperature Difference Achieved given Thermal Expansion and Length of Tubes in Heat Exchanger, enter Thermal Expansion (ΔL) & Length of Tube (L_Tube) and hit the calculate button. Here is how the Temperature Difference Achieved given Thermal Expansion and Length of Tubes in Heat Exchanger calculation can be explained with given input values -> 41.00011 = 0.017915/((97.1*10^-6)*4.5).

FAQ

What is Temperature Difference Achieved given Thermal Expansion and Length of Tubes in Heat Exchanger?

The Temperature Difference Achieved given Thermal Expansion and Length of Tubes in Heat Exchanger formula is defined as the change in temperature achieved by the fluid which is passed through a shell and tube Heat Exchanger and is represented as ΔT_C = ΔL/((97.1*10^-6)*L_Tube) or Temperature Difference = Thermal Expansion/((97.1*10^-6)*Length of Tube). Thermal expansion refers to the tendency of material to change its size, shape, or volume in response to a change in temperature & Length of tube is the length which will be used during heat transfer in a exchanger.

How to calculate Temperature Difference Achieved given Thermal Expansion and Length of Tubes in Heat Exchanger?

The Temperature Difference Achieved given Thermal Expansion and Length of Tubes in Heat Exchanger formula is defined as the change in temperature achieved by the fluid which is passed through a shell and tube Heat Exchanger is calculated using Temperature Difference = Thermal Expansion/((97.1*10^-6)*Length of Tube). To calculate Temperature Difference Achieved given Thermal Expansion and Length of Tubes in Heat Exchanger, you need Thermal Expansion (ΔL) & Length of Tube (L_Tube). With our tool, you need to enter the respective value for Thermal Expansion & Length of Tube and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search