Tensile Stress given Tensile Strength of Single Fillet Lap and Area of Single Fillet Weld Solution

STEP 0: Pre-Calculation Summary
Formula Used
Tensile Stress = Tensile Strength/(Area of Single Fillet Weld)
σt = TS/(Asingle)
This formula uses 3 Variables
Variables Used
Tensile Stress - (Measured in Pascal) - Tensile Stress can be defined as the magnitude of force applied along the weld, which is divided by the cross-sectional area of the weld in a direction perpendicular to the applied force.
Tensile Strength - (Measured in Pascal) - Tensile strength is the stress at the maximum on the engineering stress-strain curve.
Area of Single Fillet Weld - (Measured in Square Meter) - Area of single fillet weld is that area which is prepared by joining two metals for welding.
STEP 1: Convert Input(s) to Base Unit
Tensile Strength: 35 Megapascal --> 35000000 Pascal (Check conversion here)
Area of Single Fillet Weld: 4000 Square Millimeter --> 0.004 Square Meter (Check conversion here)
STEP 2: Evaluate Formula
Substituting Input Values in Formula
σt = TS/(Asingle) --> 35000000/(0.004)
Evaluating ... ...
σt = 8750000000
STEP 3: Convert Result to Output's Unit
8750000000 Pascal -->8750 Megapascal (Check conversion here)
FINAL ANSWER
8750 Megapascal <-- Tensile Stress
(Calculation completed in 00.004 seconds)

Credits

Created by Anshika Arya
National Institute Of Technology (NIT), Hamirpur
Anshika Arya has created this Calculator and 2000+ more calculators!
Verified by Payal Priya
Birsa Institute of Technology (BIT), Sindri
Payal Priya has verified this Calculator and 1900+ more calculators!

18 Types of Welded Joints Calculators

Allowable Tensile Stress given Tensile Strength for Single Fillet Lap Joint
Go Tensile Stress = Tensile Strength/(0.707*Length of Weld*Thickness of Plate)
Allowable Tensile Stress given Tensile Strength of Double Fillet Lap
Go Tensile Stress = Tensile Strength/(1.414*Length of Weld*Thickness of Plate)
Tensile Stress given Tensile Force and Length of Weld
Go Tensile Stress = Tensile Force in Butt Weld/(Length of Weld*Depth of Weld)
Depth of Weld given Tensile Force for Butt Weld Joint
Go Depth of Weld = Tensile Force in Butt Weld/(Tensile Stress*Length of Weld)
Tensile Strength of Single Fillet Lap Joint
Go Tensile Strength = 0.707*Tensile Stress*Length of Weld*Thickness of Plate
Tensile Strength of Double Fillet Lap
Go Tensile Strength = 1.414*Tensile Stress*Length of Weld*Thickness of Plate
Tensile Force for Butt Weld Joint given Length of Weld
Go Tensile Force in Butt Weld = Tensile Stress*Length of Weld*Depth of Weld
Tensile Stress given Tensile Strength of Double Fillet Lap and Area of Double Fillet Weld
Go Tensile Stress = Tensile Strength/(Area of Double Fillet Weld)
Tensile Stress given Tensile Strength of Single Fillet Lap and Area of Single Fillet Weld
Go Tensile Stress = Tensile Strength/(Area of Single Fillet Weld)
Tensile Strength of Double Fillet Lap given Area of Double Fillet Weld
Go Tensile Strength = Tensile Stress*Area of Double Fillet Weld
Tensile Strength of Single Fillet Lap given Area of Single Fillet Weld
Go Tensile Strength = Tensile Stress*Area of Single Fillet Weld
Tensile Stress given Tensile Force for Butt Weld Joint
Go Tensile Stress = Tensile Force in Butt Weld/Weld Bed Area
Area of Weld given Tensile Force for Butt Weld Joint
Go Weld Bed Area = Tensile Force in Butt Weld/Tensile Stress
Tensile Force for Butt Weld Joint
Go Tensile Force in Butt Weld = Tensile Stress*Weld Bed Area
Throat Thickness given Area of Fillet Weld for Double Fillet Lap Joint
Go Throat Thickness = Weld Bed Area/(2*Length of Weld)
Throat Thickness given Area of Parallel Fillet Weld
Go Throat Thickness = Weld Bed Area/(2*Length of Weld)
Throat Thickness given Area of Fillet Weld for Single Fillet Lap Joint
Go Throat Thickness = Weld Bed Area/Length of Weld
Throat Thickness for Fillet Weld
Go Throat Thickness = 0.707*Thickness of Plate

Tensile Stress given Tensile Strength of Single Fillet Lap and Area of Single Fillet Weld Formula

Tensile Stress = Tensile Strength/(Area of Single Fillet Weld)
σt = TS/(Asingle)

What do you mean by maximum shear stress theory?

The maximum shear stress theory states that the failure or yielding of a ductile material will occur when the maximum shear stress of the material equals or exceeds the shear stress value at the yield point in the uniaxial tensile test.

How to Calculate Tensile Stress given Tensile Strength of Single Fillet Lap and Area of Single Fillet Weld?

Tensile Stress given Tensile Strength of Single Fillet Lap and Area of Single Fillet Weld calculator uses Tensile Stress = Tensile Strength/(Area of Single Fillet Weld) to calculate the Tensile Stress, Tensile stress given tensile strength of single fillet lap and area of single fillet weld is defined as the magnitude of force applied along an elastic rod, which is divided by the cross-sectional area of the rod in a direction perpendicular to the applied force. Tensile Stress is denoted by σt symbol.

How to calculate Tensile Stress given Tensile Strength of Single Fillet Lap and Area of Single Fillet Weld using this online calculator? To use this online calculator for Tensile Stress given Tensile Strength of Single Fillet Lap and Area of Single Fillet Weld, enter Tensile Strength (TS) & Area of Single Fillet Weld (Asingle) and hit the calculate button. Here is how the Tensile Stress given Tensile Strength of Single Fillet Lap and Area of Single Fillet Weld calculation can be explained with given input values -> 0.00875 = 35000000/(0.004).

FAQ

What is Tensile Stress given Tensile Strength of Single Fillet Lap and Area of Single Fillet Weld?
Tensile stress given tensile strength of single fillet lap and area of single fillet weld is defined as the magnitude of force applied along an elastic rod, which is divided by the cross-sectional area of the rod in a direction perpendicular to the applied force and is represented as σt = TS/(Asingle) or Tensile Stress = Tensile Strength/(Area of Single Fillet Weld). Tensile strength is the stress at the maximum on the engineering stress-strain curve & Area of single fillet weld is that area which is prepared by joining two metals for welding.
How to calculate Tensile Stress given Tensile Strength of Single Fillet Lap and Area of Single Fillet Weld?
Tensile stress given tensile strength of single fillet lap and area of single fillet weld is defined as the magnitude of force applied along an elastic rod, which is divided by the cross-sectional area of the rod in a direction perpendicular to the applied force is calculated using Tensile Stress = Tensile Strength/(Area of Single Fillet Weld). To calculate Tensile Stress given Tensile Strength of Single Fillet Lap and Area of Single Fillet Weld, you need Tensile Strength (TS) & Area of Single Fillet Weld (Asingle). With our tool, you need to enter the respective value for Tensile Strength & Area of Single Fillet Weld and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
How many ways are there to calculate Tensile Stress?
In this formula, Tensile Stress uses Tensile Strength & Area of Single Fillet Weld. We can use 5 other way(s) to calculate the same, which is/are as follows -
  • Tensile Stress = Tensile Force in Butt Weld/Weld Bed Area
  • Tensile Stress = Tensile Force in Butt Weld/(Length of Weld*Depth of Weld)
  • Tensile Stress = Tensile Strength/(1.414*Length of Weld*Thickness of Plate)
  • Tensile Stress = Tensile Strength/(0.707*Length of Weld*Thickness of Plate)
  • Tensile Stress = Tensile Strength/(Area of Double Fillet Weld)
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!