Thickness of bar in X Shape given top angle and crossing length Calculator

Main Category	Math ↺
Math	Geometry ↺
Geometry	2D Geometry ↺
2D Geometry	X Shape ↺

✖Crossing Length is the intersection length of the two planes of the given geometry.ⓘ Crossing Length [L_Crossing]			+10% -10%
✖The Top angle is the top most angle of the Geometry.ⓘ Top angle [Angle_Top]			+10% -10%

✖Thickness is the distance through an object.ⓘ Thickness of bar in X Shape given top angle and crossing length [t]

⎘ Copy

👎

Formula

Reset

👍

Credits

Devendar Kachhwaha

Indian Institute of technology (IIT-BHU), Varanasi

Devendar Kachhwaha has created this Calculator and 25+ more calculators!

Jaseem K

IIT Madras (IIT Madras), Chennai

Jaseem K has verified this Calculator and 50+ more calculators!

Thickness of bar in X Shape given top angle and crossing length Solution

STEP 0: Pre-Calculation Summary

Formula Used

Thickness = 2*Crossing Length*sin(Top angle/2)
t = 2*L_Crossing*sin(Angle_Top/2)
This formula uses 1 Functions, 2 Variables

Functions Used

sin - Trigonometric sine function, sin(Angle)

Variables Used

Crossing Length - Crossing Length is the intersection length of the two planes of the given geometry. (Measured in Meter)
Top angle - The Top angle is the top most angle of the Geometry. (Measured in Radian)

STEP 1: Convert Input(s) to Base Unit

Crossing Length: 1 Meter --> 1 Meter No Conversion Required
Top angle: 0.528 Radian --> 0.528 Radian No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

t = 2*L_Crossing*sin(Angle_Top/2) --> 2*1*sin(0.528/2)

Evaluating ... ...

t = 0.521888089709737

STEP 3: Convert Result to Output's Unit

0.521888089709737 Meter --> No Conversion Required

FINAL ANSWER

0.521888089709737 Meter <-- Thickness

(Calculation completed in 00.015 seconds)

You are here

Home »
Math »
Geometry »
2D Geometry »
X Shape »
Thickness of bar in X Shape given top angle and crossing length

< 10+ X Shape Calculators

Perimeter of X Shape

Perimeter = 4*(Thickness+Length-Thickness*sin(pi/2-atan(Width/Height))/sin(pi-2*atan(Width/Height))) Go

Inner arm length of X Shape

Inner arm length = Length/2-Thickness*sin(pi/2-atan(Width/Height))/sin(pi-2*atan(Width/Height)) Go

Crossing length of X Shape

Crossing Length = Thickness*sin(pi/2-atan(Width/Height))/sin(pi-2*atan(Width/Height)) Go

Area of X Shape given crossing length

Area = (2*Length*Thickness*sin(Top angle))-(((Crossing Length)^2)*sin(Top angle)) Go

Crossing length of X Shape given top angle

Crossing Length = (Thickness/2)*cosec(Top angle/2) Go

Bottom angle of X Shape

Bottom angle = 2*atan(Width/Height) Go

Right angle of X Shape

Right angle = 2*atan(Height/Width) Go

Left angle of X Shape

Left angle = 2*atan(Height/Width) Go

Top angle of X Shape

Top angle = 2*atan(Width/Height) Go

Outer arm length of X Shape

Outer Arm Length = Length/2 Go

Thickness of bar in X Shape given top angle and crossing length Formula

Thickness = 2*Crossing Length*sin(Top angle/2)
t = 2*L_Crossing*sin(Angle_Top/2)

What is X Shape?

When a parallelogram shaped bar is reflected and connected with the original bar in the center then the formed shape is known as X shape. The intersection of both bars is a rhombus of which side length is called crossing length.

How to Calculate Thickness of bar in X Shape given top angle and crossing length?

Thickness of bar in X Shape given top angle and crossing length calculator uses Thickness = 2*Crossing Length*sin(Top angle/2) to calculate the Thickness, The Thickness of bar in X Shape given top angle and crossing length formula is defined as the thickness of the parallelogram bar used in X Shape, calculated using top angle and crossing length of the X Shape. Thickness is denoted by t symbol.

How to calculate Thickness of bar in X Shape given top angle and crossing length using this online calculator? To use this online calculator for Thickness of bar in X Shape given top angle and crossing length, enter Crossing Length (L_Crossing) & Top angle (Angle_Top) and hit the calculate button. Here is how the Thickness of bar in X Shape given top angle and crossing length calculation can be explained with given input values -> 0.521888 = 2*1*sin(0.528/2).

FAQ

What is Thickness of bar in X Shape given top angle and crossing length?

The Thickness of bar in X Shape given top angle and crossing length formula is defined as the thickness of the parallelogram bar used in X Shape, calculated using top angle and crossing length of the X Shape and is represented as t = 2*L_Crossing*sin(Angle_Top/2) or Thickness = 2*Crossing Length*sin(Top angle/2). Crossing Length is the intersection length of the two planes of the given geometry & The Top angle is the top most angle of the Geometry.

How to calculate Thickness of bar in X Shape given top angle and crossing length?

The Thickness of bar in X Shape given top angle and crossing length formula is defined as the thickness of the parallelogram bar used in X Shape, calculated using top angle and crossing length of the X Shape is calculated using Thickness = 2*Crossing Length*sin(Top angle/2). To calculate Thickness of bar in X Shape given top angle and crossing length, you need Crossing Length (L_Crossing) & Top angle (Angle_Top). With our tool, you need to enter the respective value for Crossing Length & Top angle and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Thickness?

In this formula, Thickness uses Crossing Length & Top angle. We can use 1 other way(s) to calculate the same, which is/are as follows -

Thickness = Perimeter/4-Inner arm length-Outer Arm Length

Facebook
Twitter
WhatsApp
Reddit
LinkedIn
E-Mail

Let Others Know

✖

Facebook

Twitter

Copied!