Thickness of Lift given Compaction Production by Compaction Equipment Calculator

✖Production Due to Compaction is the exertion of force on something so that it becomes more dense.ⓘ Production Due to Compaction [y]			+10% -10%
✖Number of Passes required to obtain the required compaction depends on the lift thickness, contact pressure, and soil moisture content.ⓘ Number of Passes [P]			+10% -10%
✖Width of Roller is the smaller dimension of the roller .ⓘ Width of Roller [W]			+10% -10%
✖Roller speed is the speed by which the roller is rolling over the surface.ⓘ Roller Speed [S]			+10% -10%
✖The Efficiency Factor is the relationship between the allowance time and the time taken.ⓘ Efficiency Factor [E]			+10% -10%

✖Lift Thickness governs aggregate size.ⓘ Thickness of Lift given Compaction Production by Compaction Equipment [L]

⎘ Copy

👎

Formula

✖

Thickness of Lift given Compaction Production by Compaction Equipment

Formula

`"L" = ("y"*"P")/(16*"W"*"S"*"E"*"S")`

Example

`"12.97578mm"=("150m³/hr"*"5")/(16*"2.89m"*"3.0km/h"*"0.50"*"3.0km/h")`

Calculator

LaTeX

Reset

👍

Download Geotechnical Engineering Formula PDF

Thickness of Lift given Compaction Production by Compaction Equipment Solution

STEP 0: Pre-Calculation Summary

Formula Used

Lift Thickness = (Production Due to Compaction*Number of Passes)/(16*Width of Roller*Roller Speed*Efficiency Factor*Roller Speed)
L = (y*P)/(16*W*S*E*S)
This formula uses 6 Variables

Variables Used

Lift Thickness - (Measured in Meter) - Lift Thickness governs aggregate size.
Production Due to Compaction - (Measured in Cubic Meter per Second) - Production Due to Compaction is the exertion of force on something so that it becomes more dense.
Number of Passes - Number of Passes required to obtain the required compaction depends on the lift thickness, contact pressure, and soil moisture content.
Width of Roller - (Measured in Meter) - Width of Roller is the smaller dimension of the roller .
Roller Speed - (Measured in Meter per Second) - Roller speed is the speed by which the roller is rolling over the surface.
Efficiency Factor - The Efficiency Factor is the relationship between the allowance time and the time taken.

STEP 1: Convert Input(s) to Base Unit

Production Due to Compaction: 150 Cubic Meter per Hour --> 0.0416666666666667 Cubic Meter per Second (Check conversion here)
Number of Passes: 5 --> No Conversion Required
Width of Roller: 2.89 Meter --> 2.89 Meter No Conversion Required
Roller Speed: 3 Kilometer per Hour --> 0.833333333333333 Meter per Second (Check conversion here)
Efficiency Factor: 0.5 --> No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

L = (y*P)/(16*W*S*E*S) --> (0.0416666666666667*5)/(16*2.89*0.833333333333333*0.5*0.833333333333333)

Evaluating ... ...

L = 0.0129757785467128

STEP 3: Convert Result to Output's Unit

0.0129757785467128 Meter -->12.9757785467128 Millimeter (Check conversion here)

FINAL ANSWER

12.9757785467128 ≈ 12.97578 Millimeter <-- Lift Thickness

(Calculation completed in 00.020 seconds)

You are here -

Home » Engineering » Civil » Geotechnical Engineering » Compaction of Soil » Compaction Equipment » Thickness of Lift given Compaction Production by Compaction Equipment

Credits

Created by Suraj Kumar

Birsa Institute of Technology (BIT), Sindri

Suraj Kumar has created this Calculator and 2200+ more calculators!

Verified by Ishita Goyal

Meerut Institute of Engineering and Technology (MIET), Meerut

Ishita Goyal has verified this Calculator and 2600+ more calculators!

< 10+ Compaction Equipment Calculators

Thickness of Lift given Compaction Production by Compaction Equipment

Go Lift Thickness = (Production Due to Compaction*Number of Passes)/(16*Width of Roller*Roller Speed*Efficiency Factor*Roller Speed)

Ratio of Pay to Loose using Compaction Production by Compaction Equipment

Go Pay Ratio = (Production Due to Compaction*Number of Passes)/(16*Width of Roller*Roller Speed*Lift Thickness*Efficiency Factor)

Efficiency Factor using Compaction Production by Compaction Equipment

Go Efficiency Factor = (Production Due to Compaction*Number of Passes)/(16*Width of Roller*Roller Speed*Lift Thickness*Pay Ratio)

Width of Roller given Compaction Production by Compaction Equipment

Go Width of Roller = (Production Due to Compaction*Number of Passes)/(16*Roller Speed*Lift Thickness*Pay Ratio*Efficiency Factor)

Speed of Roller given Compaction Production by Compaction Equipment

Go Roller Speed = (Production Due to Compaction*Number of Passes)/(16*Width of Roller*Lift Thickness*Pay Ratio*Efficiency Factor)

Number of Passes given Compaction Production by Compaction Equipment

Go Number of Passes = (16*Width of Roller*Roller Speed*Efficiency Factor*Lift Thickness*Pay Ratio)/Production Due to Compaction

Compaction Production by Compaction Equipment

Go Production Due to Compaction = (16*Width of Roller*Roller Speed*Lift Thickness*Efficiency Factor*Pay Ratio)/Number of Passes

Compaction Production by Compaction Equipment when Efficiency Factor is Excellent

Go Production Due to Compaction = (16*Width of Roller*Roller Speed*Lift Thickness*Pay Ratio*0.90)/Number of Passes

Compaction Production by Compaction Equipment when Efficiency Factor is Average

Go Production Due to Compaction = (16*Width of Roller*Roller Speed*Lift Thickness*Pay Ratio*0.80)/Number of Passes

Compaction Production by Compaction Equipment when Efficiency Factor is Poor

Go Production Due to Compaction = (16*Width of Roller*Roller Speed*Lift Thickness*Pay Ratio*0.75)/Number of Passes

Thickness of Lift given Compaction Production by Compaction Equipment Formula

Lift Thickness = (Production Due to Compaction*Number of Passes)/(16*Width of Roller*Roller Speed*Efficiency Factor*Roller Speed)
L = (y*P)/(16*W*S*E*S)

What is Compaction?

In geotechnical engineering, soil compaction is the process in which stress is applied to a soil causes densification as air is displaced from the pores between the soil grains.

How to Calculate Thickness of Lift given Compaction Production by Compaction Equipment?

Thickness of Lift given Compaction Production by Compaction Equipment calculator uses Lift Thickness = (Production Due to Compaction*Number of Passes)/(16*Width of Roller*Roller Speed*Efficiency Factor*Roller Speed) to calculate the Lift Thickness, The Thickness of lift given Compaction Production by Compaction Equipment is defined as thickness of lift when other parameters are known. Lift Thickness is denoted by L symbol.

How to calculate Thickness of Lift given Compaction Production by Compaction Equipment using this online calculator? To use this online calculator for Thickness of Lift given Compaction Production by Compaction Equipment, enter Production Due to Compaction (y), Number of Passes (P), Width of Roller (W), Roller Speed (S) & Efficiency Factor (E) and hit the calculate button. Here is how the Thickness of Lift given Compaction Production by Compaction Equipment calculation can be explained with given input values -> 12500 = (0.0416666666666667*5)/(16*2.89*0.833333333333333*0.5*0.833333333333333).

FAQ

What is Thickness of Lift given Compaction Production by Compaction Equipment?

The Thickness of lift given Compaction Production by Compaction Equipment is defined as thickness of lift when other parameters are known and is represented as L = (y*P)/(16*W*S*E*S) or Lift Thickness = (Production Due to Compaction*Number of Passes)/(16*Width of Roller*Roller Speed*Efficiency Factor*Roller Speed). Production Due to Compaction is the exertion of force on something so that it becomes more dense, Number of Passes required to obtain the required compaction depends on the lift thickness, contact pressure, and soil moisture content, Width of Roller is the smaller dimension of the roller , Roller speed is the speed by which the roller is rolling over the surface & The Efficiency Factor is the relationship between the allowance time and the time taken.

How to calculate Thickness of Lift given Compaction Production by Compaction Equipment?

The Thickness of lift given Compaction Production by Compaction Equipment is defined as thickness of lift when other parameters are known is calculated using Lift Thickness = (Production Due to Compaction*Number of Passes)/(16*Width of Roller*Roller Speed*Efficiency Factor*Roller Speed). To calculate Thickness of Lift given Compaction Production by Compaction Equipment, you need Production Due to Compaction (y), Number of Passes (P), Width of Roller (W), Roller Speed (S) & Efficiency Factor (E). With our tool, you need to enter the respective value for Production Due to Compaction, Number of Passes, Width of Roller, Roller Speed & Efficiency Factor and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search