Thickness of Plate given Area of Single Fillet Lap Joint Weld Solution

STEP 0: Pre-Calculation Summary
Formula Used
Thickness of Plate = Weld Bed Area/(0.707*Length of Weld)
tplate = Aweld bed/(0.707*l)
This formula uses 3 Variables
Variables Used
Thickness of Plate - (Measured in Meter) - The thickness of plate is the state or quality of being thick. The measure of the smallest dimension of a solid figure: a board of two-inch thickness.
Weld Bed Area - (Measured in Square Meter) - Weld Bed Area is that area which is prepared by joining two metals for welding.
Length of Weld - (Measured in Meter) - The Length of Weld is the linear distance of each weld segment.
STEP 1: Convert Input(s) to Base Unit
Weld Bed Area: 900 Square Millimeter --> 0.0009 Square Meter (Check conversion here)
Length of Weld: 8 Millimeter --> 0.008 Meter (Check conversion here)
STEP 2: Evaluate Formula
Substituting Input Values in Formula
tplate = Aweld bed/(0.707*l) --> 0.0009/(0.707*0.008)
Evaluating ... ...
tplate = 0.159123055162659
STEP 3: Convert Result to Output's Unit
0.159123055162659 Meter -->159.123055162659 Millimeter (Check conversion here)
FINAL ANSWER
159.123055162659 159.1231 Millimeter <-- Thickness of Plate
(Calculation completed in 00.020 seconds)

Credits

Created by Anshika Arya
National Institute Of Technology (NIT), Hamirpur
Anshika Arya has created this Calculator and 2000+ more calculators!
Verified by Payal Priya
Birsa Institute of Technology (BIT), Sindri
Payal Priya has verified this Calculator and 1900+ more calculators!

6 Thickness of Plate Calculators

Thickness of Plates given Tensile Strength of Single Fillet Lap Joint
Go Thickness of Plate = Tensile Strength/(0.707*Tensile Stress*Length of Weld)
Thickness of Plates given Tensile Strength for Double Fillet Lap
Go Thickness of Plate = Tensile Strength/(1.414*Tensile Stress*Length of Weld)
Thickness of Plate given Area of Double Fillet Lap Joint Weld
Go Thickness of Plate = Weld Bed Area/(1.414*Length of Weld)
Thickness of Plate given Area of Single Fillet Lap Joint Weld
Go Thickness of Plate = Weld Bed Area/(0.707*Length of Weld)
Thickness of Plate given Area of Parallel Fillet Weld
Go Thickness of Plate = Weld Bed Area/(1.414*Length of Weld)
Thickness of Plate given Throat Thickness for Fillet Weld
Go Thickness of Plate = Throat Thickness/0.707

Thickness of Plate given Area of Single Fillet Lap Joint Weld Formula

Thickness of Plate = Weld Bed Area/(0.707*Length of Weld)
tplate = Aweld bed/(0.707*l)

What is tensile strength with example?

Tensile strength is a measurement of the force required to pull something such as rope, wire, or a structural beam to the point where it breaks. The tensile strength of a material is the maximum amount of tensile stress that it can take before failure, for example, breaking.

How to Calculate Thickness of Plate given Area of Single Fillet Lap Joint Weld?

Thickness of Plate given Area of Single Fillet Lap Joint Weld calculator uses Thickness of Plate = Weld Bed Area/(0.707*Length of Weld) to calculate the Thickness of Plate, Thickness of plate given area of single fillet lap joint weld is the distance through the plate, as distinct from width or height. Thickness of Plate is denoted by tplate symbol.

How to calculate Thickness of Plate given Area of Single Fillet Lap Joint Weld using this online calculator? To use this online calculator for Thickness of Plate given Area of Single Fillet Lap Joint Weld, enter Weld Bed Area (Aweld bed) & Length of Weld (l) and hit the calculate button. Here is how the Thickness of Plate given Area of Single Fillet Lap Joint Weld calculation can be explained with given input values -> 159123.1 = 0.0009/(0.707*0.008).

FAQ

What is Thickness of Plate given Area of Single Fillet Lap Joint Weld?
Thickness of plate given area of single fillet lap joint weld is the distance through the plate, as distinct from width or height and is represented as tplate = Aweld bed/(0.707*l) or Thickness of Plate = Weld Bed Area/(0.707*Length of Weld). Weld Bed Area is that area which is prepared by joining two metals for welding & The Length of Weld is the linear distance of each weld segment.
How to calculate Thickness of Plate given Area of Single Fillet Lap Joint Weld?
Thickness of plate given area of single fillet lap joint weld is the distance through the plate, as distinct from width or height is calculated using Thickness of Plate = Weld Bed Area/(0.707*Length of Weld). To calculate Thickness of Plate given Area of Single Fillet Lap Joint Weld, you need Weld Bed Area (Aweld bed) & Length of Weld (l). With our tool, you need to enter the respective value for Weld Bed Area & Length of Weld and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
How many ways are there to calculate Thickness of Plate?
In this formula, Thickness of Plate uses Weld Bed Area & Length of Weld. We can use 5 other way(s) to calculate the same, which is/are as follows -
  • Thickness of Plate = Weld Bed Area/(1.414*Length of Weld)
  • Thickness of Plate = Weld Bed Area/(1.414*Length of Weld)
  • Thickness of Plate = Throat Thickness/0.707
  • Thickness of Plate = Tensile Strength/(1.414*Tensile Stress*Length of Weld)
  • Thickness of Plate = Tensile Strength/(0.707*Tensile Stress*Length of Weld)
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!