Toe Resistance when Allowable Load and Safety Factor is Given Calculator

Category	Engineering ↺
Engineering	Civil ↺
Civil	Piles and Piling ↺
Piles-And-Piling	Axial Load Capacity of Single Piles ↺

✖Allowable load is the maximum working load that can be applied on the structure.ⓘ Allowable Load [Q _a]			+10% -10%
✖Factor of Safety expresses how much stronger a system is than it needs to be for an intended load.ⓘ Factor of Safety [F]			+10% -10%
✖Shaft Resistance is the load resisted by a pile's shaftⓘ Shaft Resistance [Q _su]			+10% -10%

✖Toe Resistance is the load resisted by the toe of a pileⓘ Toe Resistance when Allowable Load and Safety Factor is Given [Q _bu]

⎘ Copy

👎 Report Issue!

👍 Share Now!

You are here:

Home »
Engineering »
Civil »
Piles and Piling »
Axial Load Capacity of Single Piles »
Toe Resistance when Allowable Load and Safety Factor is Given

Alithea Fernandes

Don Bosco College of Engineering (DBCE), Goa

Alithea Fernandes has created this Calculator and 100+ more calculators!

Kethavath Srinath

Osmania University (OU), Hyderabad

Kethavath Srinath has verified this Calculator and 500+ more calculators!

< 11 Other formulas that you can solve using the same Inputs

Gross Cross-Sectional Area of Column when Total Allowable Axial Load is Given

Gross area of column=Allowable Load/(0.25*Compressive strength+Allowable stress in vertical reinforcement*Area ratio of cross sectional area to gross area) GO

Allowable Load when Safety Factors are Given

Allowable Load=(Shaft Resistance/Factor of Safety F1)+(Toe Resistance/Factor of Safety F2) GO

Critical Slenderness Ratio for Aluminium Columns

Slenderness Ratio=sqrt(51000000/(Allowable Load/Cross sectional area)) GO

Critical Slenderness Ratio for Cast Iron Columns

Slenderness Ratio=(12000-(Allowable Load/Cross sectional area))/60 GO

Allowable Load when Safety Factor is Given

Allowable Load=(Shaft Resistance+Toe Resistance)/Factor of Safety GO

Shaft Resistance when Allowable Load and Safety Factor is Given

Shaft Resistance=Factor of Safety*Allowable Load-Toe Resistance GO

Smallest Moment of Inertia Allowable at Worst Section for Wrought Iron

Area Moment Of Inertia=Allowable Load*(Length of column^2) GO

Smallest Moment of Inertia Allowable at Worst Section for Medium Carbon Steel

Moment of Inertia=Allowable Load*(Length of column^2) GO

Smallest Moment of Inertia Allowable at Worst Section for Low Carbon Steel

Moment of Inertia=Allowable Load*(Length of column^2) GO

Smallest Moment of Inertia Allowable at Worst Section for Cast Iron

Moment of Inertia=Allowable Load*(Length of column^2) GO

Pile Capacity

Pile Capacity=Shaft Resistance+Toe Resistance GO

Toe Resistance when Allowable Load and Safety Factor is Given Formula

Toe Resistance=Allowable Load*Factor of Safety-Shaft Resistance
Q bu=Q a*F-Q su

More formulas

Allowable Load when Safety Factor is Given GO

Allowable Load when Safety Factors are Given GO

Pile Capacity GO

Shaft Resistance when Allowable Load and Safety Factor is Given GO

What is allowable Load?

The total load that an aircraft can transport over a given distance, taking into account weight and volume. See also airlift capability; airlift requirement; load; payload. Dictionary of Military and Associated Terms.

How to Calculate Toe Resistance when Allowable Load and Safety Factor is Given?

Toe Resistance when Allowable Load and Safety Factor is Given calculator uses Toe Resistance=Allowable Load*Factor of Safety-Shaft Resistance to calculate the Toe Resistance, The Toe Resistance when Allowable Load and Safety Factor is Given formula is defined as the load which can be resisted by the pile's toe. Toe Resistance and is denoted by Q _bu symbol.

How to calculate Toe Resistance when Allowable Load and Safety Factor is Given using this online calculator? To use this online calculator for Toe Resistance when Allowable Load and Safety Factor is Given, enter Allowable Load (Q _a), Factor of Safety (F) and Shaft Resistance (Q _su) and hit the calculate button. Here is how the Toe Resistance when Allowable Load and Safety Factor is Given calculation can be explained with given input values -> 0 = 10000*1-10000.

FAQ

What is Toe Resistance when Allowable Load and Safety Factor is Given?

The Toe Resistance when Allowable Load and Safety Factor is Given formula is defined as the load which can be resisted by the pile's toe and is represented as Q _bu=Q _a*F-Q _su or Toe Resistance=Allowable Load*Factor of Safety-Shaft Resistance. Allowable load is the maximum working load that can be applied on the structure, Factor of Safety expresses how much stronger a system is than it needs to be for an intended load and Shaft Resistance is the load resisted by a pile's shaft.

How to calculate Toe Resistance when Allowable Load and Safety Factor is Given?

The Toe Resistance when Allowable Load and Safety Factor is Given formula is defined as the load which can be resisted by the pile's toe is calculated using Toe Resistance=Allowable Load*Factor of Safety-Shaft Resistance. To calculate Toe Resistance when Allowable Load and Safety Factor is Given, you need Allowable Load (Q _a), Factor of Safety (F) and Shaft Resistance (Q _su). With our tool, you need to enter the respective value for Allowable Load, Factor of Safety and Shaft Resistance and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Facebook
Twitter
WhatsApp
Reddit
LinkedIn
E-Mail

Let Others Know

✖

Facebook

Twitter

Copied!