Torsional Shear Stress in Wire of Engine Valve Spring Calculator

✖Wahl Factor of Valve Spring is a stress factor used in order to take into account the effect of direct shear and change in coil curvature.ⓘ Wahl Factor of Valve Spring [K]			+10% -10%
✖Initial Spring Force on Valve is the preset amount of force exerted by the spring onto the body and contributed to the total force exerted by the spring.ⓘ Initial Spring Force on Valve [P_i]			+10% -10%
✖Stiffness of Valve Spring is a measure of the resistance offered by an elastic spring to deformation, every object in this universe has some stiffness.ⓘ Stiffness of Valve Spring [k]			+10% -10%
✖Lift of Valve is the height to which the valve is lifted during operation for the flow of gases.ⓘ Lift of Valve [h_max]			+10% -10%
✖Spring Index for Valve Spring is the ratio of the mean coil diameter of the spring to the diameter of the spring Wire.ⓘ Spring Index for Valve Spring [C]			+10% -10%
✖Wire Diameter of Valve Spring is the diameter of the wire of a valve spring, which constitutes the coils of the spring.ⓘ Wire Diameter of Valve Spring [d_w]			+10% -10%

✖Shear Stress in Valve Spring is the stress induced into the spring due to its compression and expansion.ⓘ Torsional Shear Stress in Wire of Engine Valve Spring [f_s]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download IC Engine Formula PDF PDF Image

Torsional Shear Stress in Wire of Engine Valve Spring Solution

STEP 0: Pre-Calculation Summary

Formula Used

Shear Stress in Valve Spring = ((8*Wahl Factor of Valve Spring*(Initial Spring Force on Valve+Stiffness of Valve Spring*Lift of Valve*Spring Index for Valve Spring))/(pi*Wire Diameter of Valve Spring^2))
f_s = ((8*K*(P_i+k*h_max*C))/(pi*d_w^2))
This formula uses 1 Constants, 7 Variables

Constants Used

pi - Archimedes' constant Value Taken As 3.14159265358979323846264338327950288

Variables Used

Shear Stress in Valve Spring - (Measured in Pascal) - Shear Stress in Valve Spring is the stress induced into the spring due to its compression and expansion.
Wahl Factor of Valve Spring - Wahl Factor of Valve Spring is a stress factor used in order to take into account the effect of direct shear and change in coil curvature.
Initial Spring Force on Valve - (Measured in Newton) - Initial Spring Force on Valve is the preset amount of force exerted by the spring onto the body and contributed to the total force exerted by the spring.
Stiffness of Valve Spring - (Measured in Newton per Meter) - Stiffness of Valve Spring is a measure of the resistance offered by an elastic spring to deformation, every object in this universe has some stiffness.
Lift of Valve - (Measured in Meter) - Lift of Valve is the height to which the valve is lifted during operation for the flow of gases.
Spring Index for Valve Spring - Spring Index for Valve Spring is the ratio of the mean coil diameter of the spring to the diameter of the spring Wire.
Wire Diameter of Valve Spring - (Measured in Meter) - Wire Diameter of Valve Spring is the diameter of the wire of a valve spring, which constitutes the coils of the spring.

STEP 1: Convert Input(s) to Base Unit

Wahl Factor of Valve Spring: 1.2 --> No Conversion Required
Initial Spring Force on Valve: 120 Newton --> 120 Newton No Conversion Required
Stiffness of Valve Spring: 9 Newton per Millimeter --> 9000 Newton per Meter (Check conversion here)
Lift of Valve: 11 Millimeter --> 0.011 Meter (Check conversion here)
Spring Index for Valve Spring: 8 --> No Conversion Required
Wire Diameter of Valve Spring: 5.5 Millimeter --> 0.0055 Meter (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

f_s = ((8*K*(P_i+k*h_max*C))/(pi*d_w^2)) --> ((8*1.2*(120+9000*0.011*8))/(pi*0.0055^2))

Evaluating ... ...

f_s = 92127825.3063248

STEP 3: Convert Result to Output's Unit

92127825.3063248 Pascal -->92.1278253063248 Newton per Square Millimeter (Check conversion here)

FINAL ANSWER

92.1278253063248 ≈ 92.12783 Newton per Square Millimeter <-- Shear Stress in Valve Spring

(Calculation completed in 00.004 seconds)

You are here -

Home » Physics » IC Engine » Design of IC Engine Components » Mechanical » Valve Spring » Torsional Shear Stress in Wire of Engine Valve Spring

Credits

Created by Saurabh Patil

Shri Govindram Seksaria Institute of Technology and Science (SGSITS ), Indore

Saurabh Patil has created this Calculator and 700+ more calculators!

Verified by Anshika Arya

National Institute Of Technology (NIT), Hamirpur

Anshika Arya has verified this Calculator and 2500+ more calculators!

< Valve Spring Calculators

Diameter of Wire of Engine Valve Spring

LaTeX Go Wire Diameter of Valve Spring = sqrt((8*Wahl Factor of Valve Spring*((Initial Spring Force on Valve+Stiffness of Valve Spring*Lift of Valve)*Spring Index for Valve Spring))/(pi*Shear Stress in Valve Spring))

Diameter of Wire of Engine Valve Spring given Torsional Shear Stress in Wire

LaTeX Go Wire Diameter of Valve Spring = sqrt((8*Wahl Factor of Valve Spring*Axial Force on Valve Spring*Spring Index for Valve Spring)/(pi*Shear Stress in Valve Spring))

Spring Index of Engine Valve Spring given Shear Stress, Maximum Force and Wire Diameter

LaTeX Go Spring Index for Valve Spring = (pi*Shear Stress in Valve Spring*Wire Diameter of Valve Spring^2)/(8*Wahl Factor of Valve Spring*Axial Force on Valve Spring)

Diameter of Wire of Engine Valve Spring given Mean Coil Diameter

LaTeX Go Wire Diameter of Valve Spring = Mean Coil Diameter of Valve Spring/8

Torsional Shear Stress in Wire of Engine Valve Spring Formula

LaTeX Go

What is Helical Spring?

The helical spring, a type of spring in which wire is wrapped in a coil that resembles a screw thread, is probably the most commonly used mechanical spring. It can be designed to carry, pull, or push loads. Twisted helical (torsion) springs are used in engine starters and hinges. Helical tension and compression springs have numerous uses, notably automobile suspension systems, gun-recoil mechanisms, and closing valves on engines.

How to Calculate Torsional Shear Stress in Wire of Engine Valve Spring?

Torsional Shear Stress in Wire of Engine Valve Spring calculator uses Shear Stress in Valve Spring = ((8*Wahl Factor of Valve Spring*(Initial Spring Force on Valve+Stiffness of Valve Spring*Lift of Valve*Spring Index for Valve Spring))/(pi*Wire Diameter of Valve Spring^2)) to calculate the Shear Stress in Valve Spring, The Torsional shear stress in wire of engine valve spring is the shear stress produced in the spring wire due to the torsional moment onto the spring wire. Shear Stress in Valve Spring is denoted by f_s symbol.

How to calculate Torsional Shear Stress in Wire of Engine Valve Spring using this online calculator? To use this online calculator for Torsional Shear Stress in Wire of Engine Valve Spring, enter Wahl Factor of Valve Spring (K), Initial Spring Force on Valve (P_i), Stiffness of Valve Spring (k), Lift of Valve (h_max), Spring Index for Valve Spring (C) & Wire Diameter of Valve Spring (d_w) and hit the calculate button. Here is how the Torsional Shear Stress in Wire of Engine Valve Spring calculation can be explained with given input values -> 9.2E-5 = ((8*1.2*(120+9000*0.011*8))/(pi*0.0055^2)).

FAQ

What is Torsional Shear Stress in Wire of Engine Valve Spring?

The Torsional shear stress in wire of engine valve spring is the shear stress produced in the spring wire due to the torsional moment onto the spring wire and is represented as f_s = ((8*K*(P_i+k*h_max*C))/(pi*d_w^2)) or Shear Stress in Valve Spring = ((8*Wahl Factor of Valve Spring*(Initial Spring Force on Valve+Stiffness of Valve Spring*Lift of Valve*Spring Index for Valve Spring))/(pi*Wire Diameter of Valve Spring^2)). Wahl Factor of Valve Spring is a stress factor used in order to take into account the effect of direct shear and change in coil curvature, Initial Spring Force on Valve is the preset amount of force exerted by the spring onto the body and contributed to the total force exerted by the spring, Stiffness of Valve Spring is a measure of the resistance offered by an elastic spring to deformation, every object in this universe has some stiffness, Lift of Valve is the height to which the valve is lifted during operation for the flow of gases, Spring Index for Valve Spring is the ratio of the mean coil diameter of the spring to the diameter of the spring Wire & Wire Diameter of Valve Spring is the diameter of the wire of a valve spring, which constitutes the coils of the spring.

How to calculate Torsional Shear Stress in Wire of Engine Valve Spring?

The Torsional shear stress in wire of engine valve spring is the shear stress produced in the spring wire due to the torsional moment onto the spring wire is calculated using Shear Stress in Valve Spring = ((8*Wahl Factor of Valve Spring*(Initial Spring Force on Valve+Stiffness of Valve Spring*Lift of Valve*Spring Index for Valve Spring))/(pi*Wire Diameter of Valve Spring^2)). To calculate Torsional Shear Stress in Wire of Engine Valve Spring, you need Wahl Factor of Valve Spring (K), Initial Spring Force on Valve (P_i), Stiffness of Valve Spring (k), Lift of Valve (h_max), Spring Index for Valve Spring (C) & Wire Diameter of Valve Spring (d_w). With our tool, you need to enter the respective value for Wahl Factor of Valve Spring, Initial Spring Force on Valve, Stiffness of Valve Spring, Lift of Valve, Spring Index for Valve Spring & Wire Diameter of Valve Spring and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Shear Stress in Valve Spring?

In this formula, Shear Stress in Valve Spring uses Wahl Factor of Valve Spring, Initial Spring Force on Valve, Stiffness of Valve Spring, Lift of Valve, Spring Index for Valve Spring & Wire Diameter of Valve Spring. We can use 1 other way(s) to calculate the same, which is/are as follows -

Shear Stress in Valve Spring = (8*Wahl Factor of Valve Spring*Axial Force on Valve Spring*Spring Index for Valve Spring)/(pi*Wire Diameter of Valve Spring^2)

Home

FREE PDFs

🔍 Search