Total Height of Wall when Total Thrust from the Soil that are Free to Move is Given Calculator

Category	Engineering ↺
Engineering	Civil ↺
Civil	Soil and Earthwork ↺
Soil-And-Earthwork	Lateral Pressure of Cohesionless Soils ↺

✖Total thrust of soil is the force acting on unit length of soil.ⓘ Total thrust of soil [P]			+10% -10%
✖unit weight of soil is the weight of soil used per unit i.e total weight of the soil divided by total volume.ⓘ unit weight of soil [γ]			+10% -10%
✖Angle of inclination of ground surface behind wall with horizontalⓘ Angle of inclination [i]			+10% -10%
✖Angle of internal friction is the angle measured between the normal force and resultant force .ⓘ Angle of internal friction [φ]			+10% -10%

✖Total height of wall which is under the consideration.ⓘ Total Height of Wall when Total Thrust from the Soil that are Free to Move is Given [h_w]

⎘ Copy

👎 Report Issue!

👍 Share Now!

You are here:

Suraj Kumar

Birsa Institute of Technology (BIT), Sindri

Suraj Kumar has created this Calculator and 400+ more calculators!

Ishita Goyal

Meerut Institute of Engineering and Technology (MIET), Meerut

Ishita Goyal has verified this Calculator and 400+ more calculators!

< 11 Other formulas that you can solve using the same Inputs

Unit Weight of Soil when Total Thrust from the Soil that are Completely Restrained is Given

unit weight of soil=(2*Total thrust of soil)/((Total height of wall)^2*cos(Angle of inclination))*((cos(Angle of inclination)+sqrt((cos(Angle of inclination))^2-(cos(Angle of internal friction))^2))/(cos(Angle of inclination)-sqrt((cos(Angle of inclination))^2-(cos(Angle of internal friction))^2))) GO

Unit Weight of Soil when Total Thrust from the Soil that are Free to Move is Given

unit weight of soil=(2*Total thrust of soil)/((Total height of wall)^2*cos(Angle of inclination))*((cos(Angle of inclination)-sqrt((cos(Angle of inclination))^2-(cos(Angle of internal friction))^2))/(cos(Angle of inclination)+sqrt((cos(Angle of inclination))^2-(cos(Angle of internal friction))^2))) GO

Total Thrust from the Soil that are Completely Restrained

Total thrust of soil=(0.5*unit weight of soil*(Total height of wall)^2*cos(Angle of inclination))*((cos(Angle of inclination)+sqrt((cos(Angle of inclination))^2-(cos(Angle of internal friction))^2))/(cos(Angle of inclination)-sqrt((cos(Angle of inclination))^2-(cos(Angle of internal friction))^2))) GO

Total Thrust from the Soil that are Free to Move

Total thrust of soil=(0.5*unit weight of soil*(Total height of wall)^2*cos(Angle of inclination))*((cos(Angle of inclination)-sqrt((cos(Angle of inclination))^2-(cos(Angle of internal friction))^2))/(cos(Angle of inclination)+sqrt((cos(Angle of inclination))^2-(cos(Angle of internal friction))^2))) GO

Net Bearing Capacity of a Long Footing in Foundation Stability Analysis

Net Bearing Capacity=(alpha footing factor*undrained shear strength of soil*value of Nc)+(effective vertical shear stress*value of Nq)+(beta footing factor*unit weight of soil*Width of the Footing*value of Nγ) GO

Void Ratio of Soil when Saturated Unit Weight is Given

Void ratio=(((Specific gravity of the soil*unit weight of soil)-Saturated unit weight)/(Saturated unit weight-Unit weight of water)) GO

Total Height of Wall when Total Thrust from the Soil for Level Surface Behind the Wall is Given

Total height of wall=sqrt((2*Total thrust of soil)/(unit weight of soil*Coefficient of active pressure)) GO

Unit Weight of Soil when Total Thrust from the Soil for Level Surface Behind the Wall is Given

unit weight of soil=(2*Total thrust of soil)/((Total height of wall)^2*Coefficient of active pressure) GO

Coefficient of Active Pressure when Total Thrust from the Soil for Level Surface is Given

Coefficient of active pressure=(2*Total thrust of soil)/(unit weight of soil*(Total height of wall)^2) GO

Total Thrust from the Soil when the Surface Behind the Wall is Level

Total thrust of soil=(0.5*unit weight of soil*(Total height of wall)^2*Coefficient of active pressure) GO

Coefficient of Active Pressure when Angle of Internal Friction of Soil is Given

Coefficient of active pressure=(tan((45*pi/180)-(Angle of internal friction/2)))^2 GO

< 4 Other formulas that calculate the same Output

Total Height of Wall when Total Thrust from the Soil that are Completely Restrained is Given

Total height of wall=sqrt((2*Total thrust of soil)/(unit weight of soil *cos(Angle of inclination)*((cos(Angle of inclination)+sqrt((cos(Angle of inclination))^2-(cos(Angle of internal friction))^2))/(cos(Angle of inclination)-sqrt((cos(Angle of inclination))^2-(cos(Angle of internal friction))^2))))) GO

Height of Wall when Thrust of Soil that are Completely Restrained and Surface is Level is Given

Total height of wall=sqrt((2*Total thrust of soil)/(unit weight of soil*Coefficient of passive pressure)) GO

Height of Wall when Total Thrust of the Soil that are Free to Move only a Small Amount is Given

Total height of wall=sqrt((2*Total thrust of soil)/(unit weight of soil*Coefficient of passive pressure)) GO

Total Height of Wall when Total Thrust from the Soil for Level Surface Behind the Wall is Given

Total height of wall=sqrt((2*Total thrust of soil)/(unit weight of soil*Coefficient of active pressure)) GO

Total Height of Wall when Total Thrust from the Soil that are Free to Move is Given Formula

Total height of wall=sqrt((2*Total thrust of soil)/(unit weight of soil *cos(Angle of inclination)*((cos(Angle of inclination)-sqrt((cos(Angle of inclination))^2-(cos(Angle of internal friction))^2))/(cos(Angle of inclination)+sqrt((cos(Angle of inclination))^2-(cos(Angle of internal friction))^2)))))
h<sub>w</sub>=sqrt((2*P)/(γ *cos(i)*((cos(i)-sqrt((cos(i))^2-(cos(φ))^2))/(cos(i)+sqrt((cos(i))^2-(cos(φ))^2)))))

More formulas

Total Thrust from the Soil that are Free to Move GO

Unit Weight of Soil when Total Thrust from the Soil that are Free to Move is Given GO

Total Thrust from the Soil when the Surface Behind the Wall is Level GO

Unit Weight of Soil when Total Thrust from the Soil for Level Surface Behind the Wall is Given GO

Total Height of Wall when Total Thrust from the Soil for Level Surface Behind the Wall is Given GO

Coefficient of Active Pressure when Total Thrust from the Soil for Level Surface is Given GO

Coefficient of Active Pressure when Angle of Internal Friction of Soil is Given GO

Angle of Internal Friction of Soil when Coefficient of Active Pressure is Given GO

Total Thrust from the Soil that are Completely Restrained GO

Unit Weight of Soil when Total Thrust from the Soil that are Completely Restrained is Given GO

Total Height of Wall when Total Thrust from the Soil that are Completely Restrained is Given GO

Total Thrust from the Soil that are Completely Restrained and Surface is Level GO

Unit Weight of Soil when Thrust of Soil that are Completely Restrained and Surface is Level is Given GO

Height of Wall when Thrust of Soil that are Completely Restrained and Surface is Level is Given GO

Coefficient of Passive Pressure when Thrust of the Soil that are Completely Restrained is Given GO

Coefficient of Passive Pressure when Angle of Internal Friction of Soil is Given GO

Angle of Internal Friction of Soil when Coefficient of Passive Pressure is Given GO

What is height of wall ?

The vertical distance from the finished floor surface to the ceiling above it. This is also known as floor-to-ceiling height. Enter the percentage of the home (or section of the home if it has wings or is sectioned) that are between 7' and 40' high walls.

How to Calculate Total Height of Wall when Total Thrust from the Soil that are Free to Move is Given?

Total Height of Wall when Total Thrust from the Soil that are Free to Move is Given calculator uses Total height of wall=sqrt((2*Total thrust of soil)/(unit weight of soil *cos(Angle of inclination)*((cos(Angle of inclination)-sqrt((cos(Angle of inclination))^2-(cos(Angle of internal friction))^2))/(cos(Angle of inclination)+sqrt((cos(Angle of inclination))^2-(cos(Angle of internal friction))^2))))) to calculate the Total height of wall, The Total Height of Wall when Total Thrust from the Soil that are Free to Move is Given formula is defined as the total height of wall which is under consideration. Total height of wall and is denoted by h_w symbol.

How to calculate Total Height of Wall when Total Thrust from the Soil that are Free to Move is Given using this online calculator? To use this online calculator for Total Height of Wall when Total Thrust from the Soil that are Free to Move is Given, enter Total thrust of soil (P), unit weight of soil (γ), Angle of inclination (i) and Angle of internal friction (φ) and hit the calculate button. Here is how the Total Height of Wall when Total Thrust from the Soil that are Free to Move is Given calculation can be explained with given input values -> 302.592 = sqrt((2*10000)/(1 *cos(0.5235987755982)*((cos(0.5235987755982)-sqrt((cos(0.5235987755982))^2-(cos(0.802851455917241))^2))/(cos(0.5235987755982)+sqrt((cos(0.5235987755982))^2-(cos(0.802851455917241))^2))))).

FAQ

What is Total Height of Wall when Total Thrust from the Soil that are Free to Move is Given?

The Total Height of Wall when Total Thrust from the Soil that are Free to Move is Given formula is defined as the total height of wall which is under consideration and is represented as h_w=sqrt((2*P)/(γ *cos(i)*((cos(i)-sqrt((cos(i))^2-(cos(φ))^2))/(cos(i)+sqrt((cos(i))^2-(cos(φ))^2))))) or Total height of wall=sqrt((2*Total thrust of soil)/(unit weight of soil *cos(Angle of inclination)*((cos(Angle of inclination)-sqrt((cos(Angle of inclination))^2-(cos(Angle of internal friction))^2))/(cos(Angle of inclination)+sqrt((cos(Angle of inclination))^2-(cos(Angle of internal friction))^2))))). Total thrust of soil is the force acting on unit length of soil, unit weight of soil is the weight of soil used per unit i.e total weight of the soil divided by total volume, Angle of inclination of ground surface behind wall with horizontal and Angle of internal friction is the angle measured between the normal force and resultant force .

How to calculate Total Height of Wall when Total Thrust from the Soil that are Free to Move is Given?

The Total Height of Wall when Total Thrust from the Soil that are Free to Move is Given formula is defined as the total height of wall which is under consideration is calculated using Total height of wall=sqrt((2*Total thrust of soil)/(unit weight of soil *cos(Angle of inclination)*((cos(Angle of inclination)-sqrt((cos(Angle of inclination))^2-(cos(Angle of internal friction))^2))/(cos(Angle of inclination)+sqrt((cos(Angle of inclination))^2-(cos(Angle of internal friction))^2))))). To calculate Total Height of Wall when Total Thrust from the Soil that are Free to Move is Given, you need Total thrust of soil (P), unit weight of soil (γ), Angle of inclination (i) and Angle of internal friction (φ). With our tool, you need to enter the respective value for Total thrust of soil, unit weight of soil, Angle of inclination and Angle of internal friction and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Total height of wall?

In this formula, Total height of wall uses Total thrust of soil, unit weight of soil, Angle of inclination and Angle of internal friction. We can use 4 other way(s) to calculate the same, which is/are as follows -

Total height of wall=sqrt((2*Total thrust of soil)/(unit weight of soil*Coefficient of active pressure))
Total height of wall=sqrt((2*Total thrust of soil)/(unit weight of soil *cos(Angle of inclination)*((cos(Angle of inclination)+sqrt((cos(Angle of inclination))^2-(cos(Angle of internal friction))^2))/(cos(Angle of inclination)-sqrt((cos(Angle of inclination))^2-(cos(Angle of internal friction))^2)))))
Total height of wall=sqrt((2*Total thrust of soil)/(unit weight of soil*Coefficient of passive pressure))
Total height of wall=sqrt((2*Total thrust of soil)/(unit weight of soil*Coefficient of passive pressure))

Facebook
Twitter
WhatsApp
Reddit
LinkedIn
E-Mail

Let Others Know

✖

Facebook

Twitter

Copied!