Transmitted Current-2 (Line PL) Calculator

✖Transmitted Current is defined as the Current wave that is traveling through the Load of the Transmission line.ⓘ Transmitted Current [I_t]			+10% -10%
✖Transmitted Current-3 is defined as the current wave that is traveling through the Load-3 of the Transmission line.ⓘ Transmitted Current-3 [I_t3]			+10% -10%

✖Transmitted Current-2 is defined as the current wave that is traveling through the Load-2 of the Transmission line.ⓘ Transmitted Current-2 (Line PL) [I_t2]

⎘ Copy

👎

Formula

✖

Transmitted Current-2 (Line PL)

Formula

`"I"_{"t2"} = "I"_{"t"}-"I"_{"t3"}`

Example

`"-10.2A"="4.8A"-"15A"`

Calculator

LaTeX

Reset

👍

Download Transmission Lines Formula PDF

Transmitted Current-2 (Line PL) Solution

STEP 0: Pre-Calculation Summary

Formula Used

Transmitted Current-2 = Transmitted Current-Transmitted Current-3
I_t2 = I_t-I_t3
This formula uses 3 Variables

Variables Used

Transmitted Current-2 - (Measured in Ampere) - Transmitted Current-2 is defined as the current wave that is traveling through the Load-2 of the Transmission line.
Transmitted Current - (Measured in Ampere) - Transmitted Current is defined as the Current wave that is traveling through the Load of the Transmission line.
Transmitted Current-3 - (Measured in Ampere) - Transmitted Current-3 is defined as the current wave that is traveling through the Load-3 of the Transmission line.

STEP 1: Convert Input(s) to Base Unit

Transmitted Current: 4.8 Ampere --> 4.8 Ampere No Conversion Required
Transmitted Current-3: 15 Ampere --> 15 Ampere No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

I_t2 = I_t-I_t3 --> 4.8-15

Evaluating ... ...

I_t2 = -10.2

STEP 3: Convert Result to Output's Unit

-10.2 Ampere --> No Conversion Required

FINAL ANSWER

-10.2 Ampere <-- Transmitted Current-2

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Electrical » Power System » Transmission Lines » Transient » Travelling Waves » Different Cases For Reflection & Transmission » Line With Parallel Loads » Transmitted Current-1,2 & 3 » Transmitted Current-2 (Line PL)

Credits

Created by Urvi Rathod

Vishwakarma Government Engineering College (VGEC), Ahmedabad

Urvi Rathod has created this Calculator and 1500+ more calculators!

Verified by Kethavath Srinath

Osmania University (OU), Hyderabad

Kethavath Srinath has verified this Calculator and 1200+ more calculators!

< 9 Transmitted Current-1,2 & 3 Calculators

Transmitted Current-2 using Reflected Current (Line PL)

Go Transmitted Current = Incident Current+Reflected Current-Transmitted Current-3

Transmitted Current-3 using Reflected Current (Line PL)

Go Transmitted Current-3 = Incident Current+Reflected Current-Transmitted Current

Transmitted Current-2 using Transmitted Coefficient of Current-2 (Line PL)

Go Transmitted Current = Transmission Coefficient of Current*Incident Current

Transmitted Current-3 using Transmitted Coefficient of Current-3 (Line PL)

Go Transmitted Current = Transmission Coefficient of Current*Incident Current

Transmitted Current-2 using Transmitted Voltage (Line PL)

Go Transmitted Current-2 = Transmitted Voltage/Impedance of Secondary Winding

Transmitted Current-3 using Transmitted Voltage (Line PL)

Go Transmitted Current-3 = Transmitted Voltage/Impedance of Tertiary Winding

Transmitted Current-1 (Line PL)

Go Transmitted Current-1 = Transmitted Current-2+Transmitted Current-3

Transmitted Current-2 (Line PL)

Go Transmitted Current-2 = Transmitted Current-Transmitted Current-3

Transmitted Current-3 (Line PL)

Go Transmitted Current-3 = Transmitted Current-Transmitted Current-2

Transmitted Current-2 (Line PL) Formula

Transmitted Current-2 = Transmitted Current-Transmitted Current-3
I_t2 = I_t-I_t3

What is line termination?

In electronics, electrical termination is the practice of ending a transmission line with a device that matches the line's characteristic impedance. Termination prevents signals from reflecting off the end of the transmission line.

How to Calculate Transmitted Current-2 (Line PL)?

Transmitted Current-2 (Line PL) calculator uses Transmitted Current-2 = Transmitted Current-Transmitted Current-3 to calculate the Transmitted Current-2, The Transmitted Current-2 (line PL) formula is defined as the current wave that is traveling through the Load-2 of the Transmission line. Transmitted Current-2 is denoted by I_t2 symbol.

How to calculate Transmitted Current-2 (Line PL) using this online calculator? To use this online calculator for Transmitted Current-2 (Line PL), enter Transmitted Current (I_t) & Transmitted Current-3 (I_t3) and hit the calculate button. Here is how the Transmitted Current-2 (Line PL) calculation can be explained with given input values -> -10.2 = 4.8-15.

FAQ

What is Transmitted Current-2 (Line PL)?

The Transmitted Current-2 (line PL) formula is defined as the current wave that is traveling through the Load-2 of the Transmission line and is represented as I_t2 = I_t-I_t3 or Transmitted Current-2 = Transmitted Current-Transmitted Current-3. Transmitted Current is defined as the Current wave that is traveling through the Load of the Transmission line & Transmitted Current-3 is defined as the current wave that is traveling through the Load-3 of the Transmission line.

How to calculate Transmitted Current-2 (Line PL)?

The Transmitted Current-2 (line PL) formula is defined as the current wave that is traveling through the Load-2 of the Transmission line is calculated using Transmitted Current-2 = Transmitted Current-Transmitted Current-3. To calculate Transmitted Current-2 (Line PL), you need Transmitted Current (I_t) & Transmitted Current-3 (I_t3). With our tool, you need to enter the respective value for Transmitted Current & Transmitted Current-3 and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Transmitted Current-2?

In this formula, Transmitted Current-2 uses Transmitted Current & Transmitted Current-3. We can use 1 other way(s) to calculate the same, which is/are as follows -

Transmitted Current-2 = Transmitted Voltage/Impedance of Secondary Winding

Home

FREE PDFs

🔍 Search