Transmitted Current using Incident Current Calculator

✖Incident Current is the Current wave that is traveling from the sending end to the receiving end of the Transmission line during any transient condition.ⓘ Incident Current [I_i]			+10% -10%
✖The load impedance is defined as the impedance of the load of the Transmission line during transient.ⓘ Load Impedance [I_l]			+10% -10%
✖The characteristic impedance of a uniform transmission line is the ratio of the amplitudes of voltage and current of a single wave propagating along the line during transient condition.ⓘ Characteristic Impedance [Z₀]			+10% -10%

✖Transmitted Current is defined as the Current wave that is traveling through the Load of the Transmission line.ⓘ Transmitted Current using Incident Current [I_t]

⎘ Copy

👎

Formula

✖

Transmitted Current using Incident Current

Formula

`"I"_{"t"} = 2*"I"_{"i"}*"I"_{"l"}/("Z"_{"0"}+"I"_{"l"})`

Example

`"3.206993A"=2*"12A"*"8.56Ω"/("55.5Ω"+"8.56Ω")`

Calculator

LaTeX

Reset

👍

Download Transmission Lines Formula PDF

Transmitted Current using Incident Current Solution

STEP 0: Pre-Calculation Summary

Formula Used

Transmitted Current = 2*Incident Current*Load Impedance/(Characteristic Impedance+Load Impedance)
I_t = 2*I_i*I_l/(Z₀+I_l)
This formula uses 4 Variables

Variables Used

Transmitted Current - (Measured in Ampere) - Transmitted Current is defined as the Current wave that is traveling through the Load of the Transmission line.
Incident Current - (Measured in Ampere) - Incident Current is the Current wave that is traveling from the sending end to the receiving end of the Transmission line during any transient condition.
Load Impedance - (Measured in Ohm) - The load impedance is defined as the impedance of the load of the Transmission line during transient.
Characteristic Impedance - (Measured in Ohm) - The characteristic impedance of a uniform transmission line is the ratio of the amplitudes of voltage and current of a single wave propagating along the line during transient condition.

STEP 1: Convert Input(s) to Base Unit

Incident Current: 12 Ampere --> 12 Ampere No Conversion Required
Load Impedance: 8.56 Ohm --> 8.56 Ohm No Conversion Required
Characteristic Impedance: 55.5 Ohm --> 55.5 Ohm No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

I_t = 2*I_i*I_l/(Z₀+I_l) --> 2*12*8.56/(55.5+8.56)

Evaluating ... ...

I_t = 3.20699344364658

STEP 3: Convert Result to Output's Unit

3.20699344364658 Ampere --> No Conversion Required

FINAL ANSWER

3.20699344364658 ≈ 3.206993 Ampere <-- Transmitted Current

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Electrical » Power System » Transmission Lines » Transient » Travelling Waves » Transmitted Or Refracted Waves » Transmitted Current using Incident Current

Credits

Created by Urvi Rathod

Vishwakarma Government Engineering College (VGEC), Ahmedabad

Urvi Rathod has created this Calculator and 1500+ more calculators!

Verified by Kethavath Srinath

Osmania University (OU), Hyderabad

Kethavath Srinath has verified this Calculator and 1200+ more calculators!

< 7 Transmitted Or Refracted Waves Calculators

Load Impedance using Transmitted Current

Go Load Impedance = Transmitted Voltage*Characteristic Impedance/(2*Incident Current-Transmitted Current)

Incident Voltage using Transmitted Voltage

Go Incident Voltage = Transmitted Voltage*(Characteristic Impedance+Load Impedance)/(2*Load Impedance)

Incident Current using Transmitted Current

Go Incident Current = Transmitted Current*(Load Impedance+Characteristic Impedance)/(2*Load Impedance)

Transmitted Voltage using Incident Current

Go Transmitted Voltage = 2*Incident Voltage*Load Impedance/(Load Impedance+Characteristic Impedance)

Transmitted Current using Incident Current

Go Transmitted Current = 2*Incident Current*Load Impedance/(Characteristic Impedance+Load Impedance)

Transmitted Current using Incident and Reflected Current

Go Transmitted Current = Incident Current+Reflected Current

Transmitted Voltage Transmitted Wave

Go Transmitted Voltage = Load Impedance*Transmitted Current

Transmitted Current using Incident Current Formula

Transmitted Current = 2*Incident Current*Load Impedance/(Characteristic Impedance+Load Impedance)
I_t = 2*I_i*I_l/(Z₀+I_l)

Define transmitted waves.

The transmitted waves are the Voltage wave or current wave that is traveling through the Load of the Transmission line.

How to Calculate Transmitted Current using Incident Current?

Transmitted Current using Incident Current calculator uses Transmitted Current = 2*Incident Current*Load Impedance/(Characteristic Impedance+Load Impedance) to calculate the Transmitted Current, The Transmitted Current using Incident Current formula is defined as the current wave that is traveling through the Load of the Transmission line. Transmitted Current is denoted by I_t symbol.

How to calculate Transmitted Current using Incident Current using this online calculator? To use this online calculator for Transmitted Current using Incident Current, enter Incident Current (I_i), Load Impedance (I_l) & Characteristic Impedance (Z₀) and hit the calculate button. Here is how the Transmitted Current using Incident Current calculation can be explained with given input values -> 3.206993 = 2*12*8.56/(55.5+8.56).

FAQ

What is Transmitted Current using Incident Current?

The Transmitted Current using Incident Current formula is defined as the current wave that is traveling through the Load of the Transmission line and is represented as I_t = 2*I_i*I_l/(Z₀+I_l) or Transmitted Current = 2*Incident Current*Load Impedance/(Characteristic Impedance+Load Impedance). Incident Current is the Current wave that is traveling from the sending end to the receiving end of the Transmission line during any transient condition, The load impedance is defined as the impedance of the load of the Transmission line during transient & The characteristic impedance of a uniform transmission line is the ratio of the amplitudes of voltage and current of a single wave propagating along the line during transient condition.

How to calculate Transmitted Current using Incident Current?

The Transmitted Current using Incident Current formula is defined as the current wave that is traveling through the Load of the Transmission line is calculated using Transmitted Current = 2*Incident Current*Load Impedance/(Characteristic Impedance+Load Impedance). To calculate Transmitted Current using Incident Current, you need Incident Current (I_i), Load Impedance (I_l) & Characteristic Impedance (Z₀). With our tool, you need to enter the respective value for Incident Current, Load Impedance & Characteristic Impedance and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Transmitted Current?

In this formula, Transmitted Current uses Incident Current, Load Impedance & Characteristic Impedance. We can use 1 other way(s) to calculate the same, which is/are as follows -

Transmitted Current = Incident Current+Reflected Current

Home

FREE PDFs

🔍 Search