UDL given Catenary Parameter for UDL on Catenary Parabolic Cable Calculator

✖Tension at Supports is the tension due to loading on supports.ⓘ Tension at Supports [T_s]			+10% -10%
✖Maximum Sag is the maximum catenary or the greatest amount of sag that can be allowed in the cable system.ⓘ Maximum Sag [d]			+10% -10%
✖Catenary Parameter is factor found when load in increased due to self weight.ⓘ Catenary Parameter [c]			+10% -10%

✖Uniformly distributed Load (UDL) is a load that is distributed or spread across the whole region of an element whose magnitude of the load remains uniform throughout the whole element.ⓘ UDL given Catenary Parameter for UDL on Catenary Parabolic Cable [q]

⎘ Copy

👎

Formula

✖

UDL given Catenary Parameter for UDL on Catenary Parabolic Cable

Formula

`"q" = "T"_{"s"}/("d"+"c")`

Example

`"10kN/m"="210kN"/("1.44m"+"19.56m")`

Calculator

LaTeX

Reset

👍

Download Cable System, Sag and Drainage on Bridges Formulas PDF PDF Image

UDL given Catenary Parameter for UDL on Catenary Parabolic Cable Solution

STEP 0: Pre-Calculation Summary

Formula Used

Uniformly Distributed Load = Tension at Supports/(Maximum Sag+Catenary Parameter)
q = T_s/(d+c)
This formula uses 4 Variables

Variables Used

Uniformly Distributed Load - (Measured in Newton per Meter) - Uniformly distributed Load (UDL) is a load that is distributed or spread across the whole region of an element whose magnitude of the load remains uniform throughout the whole element.
Tension at Supports - (Measured in Newton) - Tension at Supports is the tension due to loading on supports.
Maximum Sag - (Measured in Meter) - Maximum Sag is the maximum catenary or the greatest amount of sag that can be allowed in the cable system.
Catenary Parameter - (Measured in Meter) - Catenary Parameter is factor found when load in increased due to self weight.

STEP 1: Convert Input(s) to Base Unit

Tension at Supports: 210 Kilonewton --> 210000 Newton (Check conversion here)
Maximum Sag: 1.44 Meter --> 1.44 Meter No Conversion Required
Catenary Parameter: 19.56 Meter --> 19.56 Meter No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

q = T_s/(d+c) --> 210000/(1.44+19.56)

Evaluating ... ...

q = 10000

STEP 3: Convert Result to Output's Unit

10000 Newton per Meter -->10 Kilonewton per Meter (Check conversion here)

FINAL ANSWER

10 Kilonewton per Meter <-- Uniformly Distributed Load

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Civil » Bridge and Suspension Cable » Suspension Cables » Cable System, Sag and Drainage on Bridges » Catenary Cable Sag and Distance between Supports » UDL given Catenary Parameter for UDL on Catenary Parabolic Cable

Credits

Created by Rithik Agrawal

National Institute of Technology Karnataka (NITK), Surathkal

Rithik Agrawal has created this Calculator and 1300+ more calculators!

Verified by Chandana P Dev

NSS College of Engineering (NSSCE), Palakkad

Chandana P Dev has verified this Calculator and 1700+ more calculators!

< 6 Catenary Cable Sag and Distance between Supports Calculators

Maximum Sag given Catenary Parameter for UDL on Catenary Parabolic Cable

Go Maximum Sag = (-Catenary Parameter)+(Tension at Supports/Uniformly Distributed Load)

Tension at Supports given Catenary Parameter for UDL on Catenary Parabolic Cable

Go Tension at Supports = (Maximum Sag+Catenary Parameter)*Uniformly Distributed Load

UDL given Catenary Parameter for UDL on Catenary Parabolic Cable

Go Uniformly Distributed Load = Tension at Supports/(Maximum Sag+Catenary Parameter)

Catenary Parameter for UDL on Catenary Parabolic Cable

Go Catenary Parameter = (Tension at Supports/Uniformly Distributed Load)-Maximum Sag

Total Sag given Catenary Parameter for UDL on Catenary Parabolic Cable

Go Sag of Cable = Maximum Sag+Catenary Parameter

Span of Cable given Catenary Parameter for UDL on Catenary Parabolic Cable

Go Cable Span = 2*Catenary Parameter

UDL given Catenary Parameter for UDL on Catenary Parabolic Cable Formula

Uniformly Distributed Load = Tension at Supports/(Maximum Sag+Catenary Parameter)
q = T_s/(d+c)

What is Uniformly Distributed Load (UDL)?

A uniformly distributed load (UDL) is a load that is distributed or spread across the whole region of an element such as a beam or slab. In other words, the magnitude of the load remains uniform throughout the whole element.

How to Calculate UDL given Catenary Parameter for UDL on Catenary Parabolic Cable?

UDL given Catenary Parameter for UDL on Catenary Parabolic Cable calculator uses Uniformly Distributed Load = Tension at Supports/(Maximum Sag+Catenary Parameter) to calculate the Uniformly Distributed Load, The UDL given Catenary Parameter for UDL on Catenary Parabolic Cable formula is defined as the total load acting on the cable per meter span length of cable. Uniformly Distributed Load is denoted by q symbol.

How to calculate UDL given Catenary Parameter for UDL on Catenary Parabolic Cable using this online calculator? To use this online calculator for UDL given Catenary Parameter for UDL on Catenary Parabolic Cable, enter Tension at Supports (T_s), Maximum Sag (d) & Catenary Parameter (c) and hit the calculate button. Here is how the UDL given Catenary Parameter for UDL on Catenary Parabolic Cable calculation can be explained with given input values -> 0.018357 = 210000/(1.44+19.56).

FAQ

What is UDL given Catenary Parameter for UDL on Catenary Parabolic Cable?

The UDL given Catenary Parameter for UDL on Catenary Parabolic Cable formula is defined as the total load acting on the cable per meter span length of cable and is represented as q = T_s/(d+c) or Uniformly Distributed Load = Tension at Supports/(Maximum Sag+Catenary Parameter). Tension at Supports is the tension due to loading on supports, Maximum Sag is the maximum catenary or the greatest amount of sag that can be allowed in the cable system & Catenary Parameter is factor found when load in increased due to self weight.

How to calculate UDL given Catenary Parameter for UDL on Catenary Parabolic Cable?

The UDL given Catenary Parameter for UDL on Catenary Parabolic Cable formula is defined as the total load acting on the cable per meter span length of cable is calculated using Uniformly Distributed Load = Tension at Supports/(Maximum Sag+Catenary Parameter). To calculate UDL given Catenary Parameter for UDL on Catenary Parabolic Cable, you need Tension at Supports (T_s), Maximum Sag (d) & Catenary Parameter (c). With our tool, you need to enter the respective value for Tension at Supports, Maximum Sag & Catenary Parameter and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search