🔍
🔍

## Credits

Vellore Institute of Technology (VIT), Vellore
Nikita Suryawanshi has created this Calculator and 100+ more calculators!
Shiv Nadar University (SNU), Greater Noida
Devyaani Garg has verified this Calculator and 25+ more calculators!

## Value of Rh for Series Type Ohmmeter Solution

STEP 0: Pre-Calculation Summary
Formula Used
rh_s = Voltage*Resistance 2/(Current (fs)*Resistance 2+Current (fs)*Rm)
Rh = E*R2/(Ifs*R2+Ifs*Rₘ)
This formula uses 4 Variables
Variables Used
Voltage - Voltage is the value of the voltage applied in the ohmmeter. (Measured in Volt)
Resistance 2 - Resistance 2 is the zero adjust or shunt resistance of the ohmmeter (Measured in Ohm)
Current (fs) - Current (fs) is the measure of the full scale current flowing through the meter (Measured in Ampere)
Rm - Rm is the internal resistance of the coil in PMMC instrument (Measured in Ohm)
STEP 1: Convert Input(s) to Base Unit
Voltage: 15 Volt --> 15 Volt No Conversion Required
Resistance 2: 10 Ohm --> 10 Ohm No Conversion Required
Current (fs): 0.1 Ampere --> 0.1 Ampere No Conversion Required
Rm: 5 Ohm --> 5 Ohm No Conversion Required
STEP 2: Evaluate Formula
Substituting Input Values in Formula
Rh = E*R2/(Ifs*R2+Ifs*Rₘ) --> 15*10/(0.1*10+0.1*5)
Evaluating ... ...
Rh = 100
STEP 3: Convert Result to Output's Unit
100 Ohm --> No Conversion Required
100 Ohm <-- Resistance (half)
(Calculation completed in 00.031 seconds)

## < 11 Other formulas that you can solve using the same Inputs

m of Moving Iron Ammeter
m_pmmc = (Rm/Rsh)*sqrt((1+((Omega*Inductance)/Rm)^2)/(1+((Omega*Shunt Inductance)/Rsh)^2)) Go
m of Moving Iron Voltmeter
m_pmmc = sqrt(((Rm+Rs)^2+(Omega*Inductance)^2)/((Rm)^2+(Omega*Inductance)^2)) Go
Voltage of Moving Iron Voltmeter
v_meter = Im*sqrt((Rm+Rs)^2+(Omega*Inductance)^2) Go
Rs for AC Operation (Half Wave)
r_series = (RMS value*Sensitivity (ac))-Rm-R diode Go
Rs for DC Operation (Full Wave)
r_series = (RMS value*Sensitivity)-Rm-(2*R diode) Go
Rs for DC Operation (Half Wave)
r_series = (RMS value*Sensitivity)-Rm-R diode Go
Rsh of PMMC based Ammeter
r_sh = (Im*Rm)/(Current (measured)-Im) Go
Rs of PMMC based voltmeter
r_series = (Voltage (full range)/Im)-Rm Go
m of PMMC based Ammeter
m_pmmc = (1+Rm)/Rsh Go
m of PMMC based voltmeter
m_pmmc = 1+(Rs/Rm) Go
DC Meter Sensitivity
s_dc = 1/Current (fs) Go

## < 1 Other formulas that calculate the same Output

Value of Rh for Shunt Type Ohmmeter
rh_s = (Resistance 1*Rm)/(Resistance 1+Rm) Go

### Value of Rh for Series Type Ohmmeter Formula

rh_s = Voltage*Resistance 2/(Current (fs)*Resistance 2+Current (fs)*Rm)
Rh = E*R2/(Ifs*R2+Ifs*Rₘ)

## How is the pointer scale marked?

The pointer scale graduates from zero to infinity from the right to the left. Therefore the current decreases from maximum to zero from right to left.

## How to Calculate Value of Rh for Series Type Ohmmeter?

Value of Rh for Series Type Ohmmeter calculator uses rh_s = Voltage*Resistance 2/(Current (fs)*Resistance 2+Current (fs)*Rm) to calculate the Resistance (half), The Value of Rh for Series Type Ohmmeter formula is directly dependent on the voltage applied and the shunt resistance. It gives the effective voltage at half scale operation. Resistance (half) and is denoted by Rh symbol.

How to calculate Value of Rh for Series Type Ohmmeter using this online calculator? To use this online calculator for Value of Rh for Series Type Ohmmeter, enter Voltage (E), Resistance 2 (R2), Current (fs) (Ifs) and Rm (Rₘ) and hit the calculate button. Here is how the Value of Rh for Series Type Ohmmeter calculation can be explained with given input values -> 100 = 15*10/(0.1*10+0.1*5).

### FAQ

What is Value of Rh for Series Type Ohmmeter?
The Value of Rh for Series Type Ohmmeter formula is directly dependent on the voltage applied and the shunt resistance. It gives the effective voltage at half scale operation and is represented as Rh = E*R2/(Ifs*R2+Ifs*Rₘ) or rh_s = Voltage*Resistance 2/(Current (fs)*Resistance 2+Current (fs)*Rm). Voltage is the value of the voltage applied in the ohmmeter, Resistance 2 is the zero adjust or shunt resistance of the ohmmeter, Current (fs) is the measure of the full scale current flowing through the meter and Rm is the internal resistance of the coil in PMMC instrument.
How to calculate Value of Rh for Series Type Ohmmeter?
The Value of Rh for Series Type Ohmmeter formula is directly dependent on the voltage applied and the shunt resistance. It gives the effective voltage at half scale operation is calculated using rh_s = Voltage*Resistance 2/(Current (fs)*Resistance 2+Current (fs)*Rm). To calculate Value of Rh for Series Type Ohmmeter, you need Voltage (E), Resistance 2 (R2), Current (fs) (Ifs) and Rm (Rₘ). With our tool, you need to enter the respective value for Voltage, Resistance 2, Current (fs) and Rm and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
How many ways are there to calculate Resistance (half)?
In this formula, Resistance (half) uses Voltage, Resistance 2, Current (fs) and Rm. We can use 1 other way(s) to calculate the same, which is/are as follows -
• rh_s = (Resistance 1*Rm)/(Resistance 1+Rm)
Let Others Know