Phase Shifted Voltage Gain using Transconductance Calculator

✖Transconductance is defined as the ratio of the change in the output current to the change in the input voltage, with the gate-source voltage held constant.ⓘ Transconductance [g_m]			+10% -10%
✖Load resistance is the external resistance connected between the drain terminal of the MOSFET and the power supply voltage.ⓘ Load Resistance [R_L]			+10% -10%

✖Phase Shift Voltage gain is a measure of the amplification of an electrical signal by an amplifier. It is the ratio of the output voltage to the input voltage of the circuit, which are out of phase.ⓘ Phase Shifted Voltage Gain using Transconductance [A_v(ph)]

⎘ Copy

👎

Formula

✖

Phase Shifted Voltage Gain using Transconductance

Formula

`"A"_{"v(ph)"} = -("g"_{"m"}*"R"_{"L"})`

Example

`"-0.14"=-("0.5mS"*"0.28kΩ")`

Calculator

LaTeX

Reset

👍

Download MOSFET Formula PDF PDF Image

Phase Shifted Voltage Gain using Transconductance Solution

STEP 0: Pre-Calculation Summary

Formula Used

Phase Shift Voltage Gain = -(Transconductance*Load Resistance)
A_v(ph) = -(g_m*R_L)
This formula uses 3 Variables

Variables Used

Phase Shift Voltage Gain - Phase Shift Voltage gain is a measure of the amplification of an electrical signal by an amplifier. It is the ratio of the output voltage to the input voltage of the circuit, which are out of phase.
Transconductance - (Measured in Siemens) - Transconductance is defined as the ratio of the change in the output current to the change in the input voltage, with the gate-source voltage held constant.
Load Resistance - (Measured in Ohm) - Load resistance is the external resistance connected between the drain terminal of the MOSFET and the power supply voltage.

STEP 1: Convert Input(s) to Base Unit

Transconductance: 0.5 Millisiemens --> 0.0005 Siemens (Check conversion here)
Load Resistance: 0.28 Kilohm --> 280 Ohm (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

A_v(ph) = -(g_m*R_L) --> -(0.0005*280)

Evaluating ... ...

A_v(ph) = -0.14

STEP 3: Convert Result to Output's Unit

-0.14 --> No Conversion Required

FINAL ANSWER

-0.14 <-- Phase Shift Voltage Gain

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Electronics » MOSFET » Analog Electronics » Amplification Factor/Gain » Phase Shifted Voltage Gain using Transconductance

Credits

Created by Payal Priya

Birsa Institute of Technology (BIT), Sindri

Payal Priya has created this Calculator and 600+ more calculators!

Verified by Anshika Arya

National Institute Of Technology (NIT), Hamirpur

Anshika Arya has verified this Calculator and 2500+ more calculators!

< 6 Amplification Factor/Gain Calculators

Voltage Gain given Load Resistance of MOSFET

Go Voltage Gain = Transconductance*(1/(1/Load Resistance+1/Output Resistance))/(1+Transconductance*Source Resistance)

Maximum Voltage Gain at Bias Point

Go Maximum Voltage Gain = 2*(Supply Voltage-Effective Voltage)/(Effective Voltage)

Voltage Gain given Drain Voltage

Go Voltage Gain = (Drain Current*Load Resistance*2)/Effective Voltage

Phase Shifted Voltage Gain using Transconductance

Go Phase Shift Voltage Gain = -(Transconductance*Load Resistance)

Maximum Voltage Gain given all Voltages

Go Maximum Voltage Gain = (Supply Voltage-0.3)/Thermal Voltage

Voltage Gain using Single Component of Drain Voltage

Go Voltage Gain = Drain Voltage/Input Signal

Phase Shifted Voltage Gain using Transconductance Formula

Phase Shift Voltage Gain = -(Transconductance*Load Resistance)
A_v(ph) = -(g_m*R_L)

What is voltage gain?

The difference between the output signal voltage level in decibels and the input signal voltage level in decibels; this value is equal to 20 times the common logarithm of the ratio of the output voltage to the input voltage.

How to Calculate Phase Shifted Voltage Gain using Transconductance?

Phase Shifted Voltage Gain using Transconductance calculator uses Phase Shift Voltage Gain = -(Transconductance*Load Resistance) to calculate the Phase Shift Voltage Gain, The Phase Shifted Voltage Gain using Transconductance is the ratio of voltage that an electronic device needs in order to power on and function. and input voltage combined. Phase Shift Voltage Gain is denoted by A_v(ph) symbol.

How to calculate Phase Shifted Voltage Gain using Transconductance using this online calculator? To use this online calculator for Phase Shifted Voltage Gain using Transconductance, enter Transconductance (g_m) & Load Resistance (R_L) and hit the calculate button. Here is how the Phase Shifted Voltage Gain using Transconductance calculation can be explained with given input values -> -0.14 = -(0.0005*280).

FAQ

What is Phase Shifted Voltage Gain using Transconductance?

The Phase Shifted Voltage Gain using Transconductance is the ratio of voltage that an electronic device needs in order to power on and function. and input voltage combined and is represented as A_v(ph) = -(g_m*R_L) or Phase Shift Voltage Gain = -(Transconductance*Load Resistance). Transconductance is defined as the ratio of the change in the output current to the change in the input voltage, with the gate-source voltage held constant & Load resistance is the external resistance connected between the drain terminal of the MOSFET and the power supply voltage.

How to calculate Phase Shifted Voltage Gain using Transconductance?

The Phase Shifted Voltage Gain using Transconductance is the ratio of voltage that an electronic device needs in order to power on and function. and input voltage combined is calculated using Phase Shift Voltage Gain = -(Transconductance*Load Resistance). To calculate Phase Shifted Voltage Gain using Transconductance, you need Transconductance (g_m) & Load Resistance (R_L). With our tool, you need to enter the respective value for Transconductance & Load Resistance and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search