Voltage Regulation in End Condenser Method Solution

STEP 0: Pre-Calculation Summary
Formula Used
Voltage Regulation in ECM = (Sending End Voltage in ECM-Receiving End Voltage in ECM)/Receiving End Voltage in ECM
%Vecm = (Vs(ecm)-Vr(ecm))/Vr(ecm)
This formula uses 3 Variables
Variables Used
Voltage Regulation in ECM - Voltage Regulation in ECM is the difference in voltage at the receiving end of the transmission line between conditions of no-load and full load is called voltage regulation.
Sending End Voltage in ECM - (Measured in Volt) - Sending End Voltage in ECM is the voltage at the sending end of a transmission line.
Receiving End Voltage in ECM - (Measured in Volt) - Receiving End Voltage in ECM is the voltage developed at the receiving end of a transmission line.
STEP 1: Convert Input(s) to Base Unit
Sending End Voltage in ECM: 400 Volt --> 400 Volt No Conversion Required
Receiving End Voltage in ECM: 256 Volt --> 256 Volt No Conversion Required
STEP 2: Evaluate Formula
Substituting Input Values in Formula
%Vecm = (Vs(ecm)-Vr(ecm))/Vr(ecm) --> (400-256)/256
Evaluating ... ...
%Vecm = 0.5625
STEP 3: Convert Result to Output's Unit
0.5625 --> No Conversion Required
FINAL ANSWER
0.5625 <-- Voltage Regulation in ECM
(Calculation completed in 00.004 seconds)

Credits

Created by Urvi Rathod
Vishwakarma Government Engineering College (VGEC), Ahmedabad
Urvi Rathod has created this Calculator and 1500+ more calculators!
Verified by Shobhit Dimri
Bipin Tripathi Kumaon Institute of Technology (BTKIT), Dwarahat
Shobhit Dimri has verified this Calculator and 100+ more calculators!

17 End Condenser Method in Medium Line Calculators

Receiving End Angle using Sending End Power in End Condenser Method
Go Receiving End Phase Angle in ECM = acos((Sending End Power in ECM-Power Loss in ECM)/(3*Receiving End Current in ECM*Receiving End Voltage in ECM))
Voltage Regulation in End Condenser Method
Go Voltage Regulation in ECM = (Sending End Voltage in ECM-Receiving End Voltage in ECM)/Receiving End Voltage in ECM
Sending End Current using Impedance in End Condenser Method
Go Sending End Current in ECM = (Sending End Voltage in ECM-Receiving End Voltage in ECM)/Impedance in ECM
Receiving End Voltage in End Condenser Method
Go Receiving End Voltage in ECM = Sending End Voltage in ECM-(Sending End Current in ECM*Impedance in ECM)
Sending End Voltage in End Condenser Method
Go Sending End Voltage in ECM = Receiving End Voltage in ECM+(Sending End Current in ECM*Impedance in ECM)
Impedance(ECM)
Go Impedance in ECM = (Sending End Voltage in ECM-Receiving End Voltage in ECM)/Sending End Current in ECM
Sending End Current using Losses in End Condenser Method
Go Sending End Current in ECM = sqrt(Power Loss in ECM/(3*Resistance in ECM))
Transmission Efficiency in End Condenser Method
Go Transmission Efficiency in ECM = (Receiving End Power in ECM/Sending End Power in ECM)*100
Receiving End Current in End Condenser Method
Go Receiving End Current in ECM = Sending End Current in ECM-Capacitive Current in ECM
Sending End Current in End Condenser Method
Go Sending End Current in ECM = Receiving End Current in ECM+Capacitive Current in ECM
Capacitive Current in End Condenser Method
Go Capacitive Current in ECM = Sending End Current in ECM-Receiving End Current in ECM
Sending End Power in End Condenser Method
Go Sending End Power in ECM = Receiving End Power in ECM-Power Loss in ECM
Resistance using Losses in End Condenser Method
Go Resistance in ECM = Power Loss in ECM/(3*Sending End Current in ECM^2)
Line Losses in End Condenser Method
Go Power Loss in ECM = 3*Resistance in ECM*Sending End Current in ECM^2
Admittance using A Parameter in End Condenser Method
Go Admittance in ECM = (2*(A Parameter in ECM-1))/Impedance in ECM
Impedance using A Parameter in End Condenser Method
Go Impedance in ECM = (2*(A Parameter in ECM-1))/Admittance in ECM
Medium Line A Parameter (LEC)
Go A Parameter in ECM = 1+((Impedance in ECM*Admittance in ECM)/2)

Voltage Regulation in End Condenser Method Formula

Voltage Regulation in ECM = (Sending End Voltage in ECM-Receiving End Voltage in ECM)/Receiving End Voltage in ECM
%Vecm = (Vs(ecm)-Vr(ecm))/Vr(ecm)

What is end condenser method?

In this method, the capacitance of the line is lumped or concentrated at the receiving or load end. This method of localizing the line capacitance at the load end overestimates the effects of capacitance.

How to Calculate Voltage Regulation in End Condenser Method?

Voltage Regulation in End Condenser Method calculator uses Voltage Regulation in ECM = (Sending End Voltage in ECM-Receiving End Voltage in ECM)/Receiving End Voltage in ECM to calculate the Voltage Regulation in ECM, The Voltage Regulation in End Condenser Method formula is defined as a measure of the change in the voltage magnitude between the sending and receiving end of a component, such as a transmission or distribution line. Voltage Regulation in ECM is denoted by %Vecm symbol.

How to calculate Voltage Regulation in End Condenser Method using this online calculator? To use this online calculator for Voltage Regulation in End Condenser Method, enter Sending End Voltage in ECM (Vs(ecm)) & Receiving End Voltage in ECM (Vr(ecm)) and hit the calculate button. Here is how the Voltage Regulation in End Condenser Method calculation can be explained with given input values -> 0.5625 = (400-256)/256.

FAQ

What is Voltage Regulation in End Condenser Method?
The Voltage Regulation in End Condenser Method formula is defined as a measure of the change in the voltage magnitude between the sending and receiving end of a component, such as a transmission or distribution line and is represented as %Vecm = (Vs(ecm)-Vr(ecm))/Vr(ecm) or Voltage Regulation in ECM = (Sending End Voltage in ECM-Receiving End Voltage in ECM)/Receiving End Voltage in ECM. Sending End Voltage in ECM is the voltage at the sending end of a transmission line & Receiving End Voltage in ECM is the voltage developed at the receiving end of a transmission line.
How to calculate Voltage Regulation in End Condenser Method?
The Voltage Regulation in End Condenser Method formula is defined as a measure of the change in the voltage magnitude between the sending and receiving end of a component, such as a transmission or distribution line is calculated using Voltage Regulation in ECM = (Sending End Voltage in ECM-Receiving End Voltage in ECM)/Receiving End Voltage in ECM. To calculate Voltage Regulation in End Condenser Method, you need Sending End Voltage in ECM (Vs(ecm)) & Receiving End Voltage in ECM (Vr(ecm)). With our tool, you need to enter the respective value for Sending End Voltage in ECM & Receiving End Voltage in ECM and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!