Volume of Sand per unit length of Shoreline placed before there is any Dry Beach after Equilibrium Solution

STEP 0: Pre-Calculation Summary
Formula Used
Volume per unit Length of Shoreline = (3/5)*(The Depth of Closure/Parameter for Fill Sands)^(5/2)*(Parameter for Native Sands-Parameter for Fill Sands)
V = (3/5)*(Dc/AF)^(5/2)*(AN-AF)
This formula uses 4 Variables
Variables Used
Volume per unit Length of Shoreline - (Measured in Square Meter) - Volume per unit Length of Shoreline required to produce a Beach Width W.
The Depth of Closure - (Measured in Meter) - The Depth of Closure [length] for a given or characteristic time interval is the most landward depth seaward of which there is no significant change in bottom elevation.
Parameter for Fill Sands - Parameter for Fill Sands of different sand sizes.
Parameter for Native Sands - Parameter for Native Sands of different sand sizes.
STEP 1: Convert Input(s) to Base Unit
The Depth of Closure: 6 Meter --> 6 Meter No Conversion Required
Parameter for Fill Sands: 0.1 --> No Conversion Required
Parameter for Native Sands: 0.115 --> No Conversion Required
STEP 2: Evaluate Formula
Substituting Input Values in Formula
V = (3/5)*(Dc/AF)^(5/2)*(AN-AF) --> (3/5)*(6/0.1)^(5/2)*(0.115-0.1)
Evaluating ... ...
V = 250.969320834241
STEP 3: Convert Result to Output's Unit
250.969320834241 Square Meter --> No Conversion Required
FINAL ANSWER
250.969320834241 250.9693 Square Meter <-- Volume per unit Length of Shoreline
(Calculation completed in 00.020 seconds)

Credits

Created by Mithila Muthamma PA
Coorg Institute of Technology (CIT), Coorg
Mithila Muthamma PA has created this Calculator and 2000+ more calculators!
Verified by Chandana P Dev
NSS College of Engineering (NSSCE), Palakkad
Chandana P Dev has verified this Calculator and 1700+ more calculators!

8 Seawall Trap Ratio Calculators

Depth of Closure given Volume of Sand per unit Length of Shoreline
Go The Depth of Closure = Parameter for Fill Sands*(Volume per unit Length of Shoreline/((3/5)*(Parameter for Native Sands-Parameter for Fill Sands)))^(2/5)
Volume of Sand per unit length of Shoreline placed before there is any Dry Beach after Equilibrium
Go Volume per unit Length of Shoreline = (3/5)*(The Depth of Closure/Parameter for Fill Sands)^(5/2)*(Parameter for Native Sands-Parameter for Fill Sands)
Volume per unit length of Shoreline required to produce Beach Width
Go Volume per unit Length of Shoreline = Beach Width*(Design Berm Elevation+The Depth of Closure)
Design Berm Elevation given Volume per unit Length of Shoreline
Go Design Berm Elevation = ((Volume per unit Length of Shoreline/Beach Width)-The Depth of Closure)
Depth of Closure given Volume per unit Length of Shoreline
Go The Depth of Closure = ((Volume per unit Length of Shoreline/Beach Width)-Design Berm Elevation)
Active Sediment Volume given Seawall Trap Ratio
Go Active Sediment Volume = Wall Trap Volume/Seawall Trap Ratio
Wall Trap Volume given Seawall Trap Ratio
Go Wall Trap Volume = Seawall Trap Ratio*Active Sediment Volume
Seawall Trap Ratio
Go Seawall Trap Ratio = Wall Trap Volume/Active Sediment Volume

Volume of Sand per unit length of Shoreline placed before there is any Dry Beach after Equilibrium Formula

Volume per unit Length of Shoreline = (3/5)*(The Depth of Closure/Parameter for Fill Sands)^(5/2)*(Parameter for Native Sands-Parameter for Fill Sands)
V = (3/5)*(Dc/AF)^(5/2)*(AN-AF)

What is the Depth of Closure?

The depth of closure for a given or characteristic time interval is the most landward depth seaward of which there is no significant change in bottom elevation and no significant net sediment exchange between the nearshore and the offshore.

How to Calculate Volume of Sand per unit length of Shoreline placed before there is any Dry Beach after Equilibrium?

Volume of Sand per unit length of Shoreline placed before there is any Dry Beach after Equilibrium calculator uses Volume per unit Length of Shoreline = (3/5)*(The Depth of Closure/Parameter for Fill Sands)^(5/2)*(Parameter for Native Sands-Parameter for Fill Sands) to calculate the Volume per unit Length of Shoreline, The Volume of Sand per unit length of Shoreline placed before there is any Dry Beach after Equilibrium, for a nonintersecting profile, the volume of sand per unit length of shoreline that must be placed before there is any dry beach after equilibrium. Volume per unit Length of Shoreline is denoted by V symbol.

How to calculate Volume of Sand per unit length of Shoreline placed before there is any Dry Beach after Equilibrium using this online calculator? To use this online calculator for Volume of Sand per unit length of Shoreline placed before there is any Dry Beach after Equilibrium, enter The Depth of Closure (Dc), Parameter for Fill Sands (AF) & Parameter for Native Sands (AN) and hit the calculate button. Here is how the Volume of Sand per unit length of Shoreline placed before there is any Dry Beach after Equilibrium calculation can be explained with given input values -> 250.9693 = (3/5)*(6/0.1)^(5/2)*(0.115-0.1).

FAQ

What is Volume of Sand per unit length of Shoreline placed before there is any Dry Beach after Equilibrium?
The Volume of Sand per unit length of Shoreline placed before there is any Dry Beach after Equilibrium, for a nonintersecting profile, the volume of sand per unit length of shoreline that must be placed before there is any dry beach after equilibrium and is represented as V = (3/5)*(Dc/AF)^(5/2)*(AN-AF) or Volume per unit Length of Shoreline = (3/5)*(The Depth of Closure/Parameter for Fill Sands)^(5/2)*(Parameter for Native Sands-Parameter for Fill Sands). The Depth of Closure [length] for a given or characteristic time interval is the most landward depth seaward of which there is no significant change in bottom elevation, Parameter for Fill Sands of different sand sizes & Parameter for Native Sands of different sand sizes.
How to calculate Volume of Sand per unit length of Shoreline placed before there is any Dry Beach after Equilibrium?
The Volume of Sand per unit length of Shoreline placed before there is any Dry Beach after Equilibrium, for a nonintersecting profile, the volume of sand per unit length of shoreline that must be placed before there is any dry beach after equilibrium is calculated using Volume per unit Length of Shoreline = (3/5)*(The Depth of Closure/Parameter for Fill Sands)^(5/2)*(Parameter for Native Sands-Parameter for Fill Sands). To calculate Volume of Sand per unit length of Shoreline placed before there is any Dry Beach after Equilibrium, you need The Depth of Closure (Dc), Parameter for Fill Sands (AF) & Parameter for Native Sands (AN). With our tool, you need to enter the respective value for The Depth of Closure, Parameter for Fill Sands & Parameter for Native Sands and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
How many ways are there to calculate Volume per unit Length of Shoreline?
In this formula, Volume per unit Length of Shoreline uses The Depth of Closure, Parameter for Fill Sands & Parameter for Native Sands. We can use 1 other way(s) to calculate the same, which is/are as follows -
  • Volume per unit Length of Shoreline = Beach Width*(Design Berm Elevation+The Depth of Closure)
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!