Volumetric Strain given Bulk Modulus Solution

STEP 0: Pre-Calculation Summary
Formula Used
Volumetric Strain = Direct Stress/Bulk Modulus
εv = σ/K
This formula uses 3 Variables
Variables Used
Volumetric Strain - The Volumetric Strain is the ratio of change in volume to original volume.
Direct Stress - (Measured in Pascal) - Direct Stress is the stress developed due to force applied which is parallel or collinear to the axis of the component.
Bulk Modulus - (Measured in Pascal) - The Bulk Modulus is a measure of the ability of a substance to withstand changes in volume when under compression on all sides.
STEP 1: Convert Input(s) to Base Unit
Direct Stress: 18 Megapascal --> 18000000 Pascal (Check conversion here)
Bulk Modulus: 18000 Megapascal --> 18000000000 Pascal (Check conversion here)
STEP 2: Evaluate Formula
Substituting Input Values in Formula
εv = σ/K --> 18000000/18000000000
Evaluating ... ...
εv = 0.001
STEP 3: Convert Result to Output's Unit
0.001 --> No Conversion Required
FINAL ANSWER
0.001 <-- Volumetric Strain
(Calculation completed in 00.004 seconds)

Credits

Created by Vaibhav Malani
National Institute of Technology (NIT), Tiruchirapalli
Vaibhav Malani has created this Calculator and 600+ more calculators!
Verified by Anshika Arya
National Institute Of Technology (NIT), Hamirpur
Anshika Arya has verified this Calculator and 2500+ more calculators!

17 Volumetric Strain Calculators

Volumetric Strain given Change in Length, Breadth and Width
Go Volumetric Strain = Change in Length/Length of Section+Change in Breadth/Breadth of Bar+Change in Depth/Depth of Bar
Volumetric Strain given Change in Length
Go Volumetric Strain = (Change in Length /Length of Section)*(1-2*Poisson's Ratio)
Volumetric Strain using Young's Modulus and Poisson's Ratio
Go Volumetric Strain = (3*Tensile Stress*(1-2*Poisson's Ratio))/Young's Modulus
Young's Modulus using Poisson's Ratio
Go Young's Modulus = (3*Tensile Stress*(1-2*Poisson's Ratio))/Volumetric Strain
Poisson's Ratio using Bulk Modulus and Young's Modulus
Go Poisson's Ratio = (3*Bulk Modulus-Young's Modulus)/(6*Bulk Modulus)
Poisson's Ratio given Volumetric Strain and Longitudinal Strain
Go Poisson's Ratio = 1/2*(1-Volumetric Strain/Longitudinal Strain)
Longitudinal Strain given Volumetric Strain and Poisson's Ratio
Go Longitudinal Strain = Volumetric Strain/(1-2*Poisson's Ratio)
Volumetric Strain of Cylindrical Rod using Poisson's Ratio
Go Volumetric Strain = Longitudinal Strain*(1-2*Poisson's Ratio)
Lateral Strain given Volumetric and Longitudinal Strain
Go Lateral Strain = -(Longitudinal Strain-Volumetric Strain)/2
Longitudinal Strain given Volumetric and Lateral Strain
Go Longitudinal Strain = Volumetric Strain-(2*Lateral Strain)
Volumetric Strain of Cylindrical Rod
Go Volumetric Strain = Longitudinal Strain-2*(Lateral Strain)
Volumetric Strain given Longitudinal and Lateral Strain
Go Volumetric Strain = Longitudinal Strain+2*Lateral Strain
Bulk Modulus using Young's Modulus
Go Bulk Modulus = Young's Modulus/(3*(1-2*Poisson's Ratio))
Young's Modulus using Bulk Modulus
Go Young's Modulus = 3*Bulk Modulus*(1-2*Poisson's Ratio)
Direct Stress for given Bulk Modulus and Volumetric Strain
Go Direct Stress = Bulk Modulus*Volumetric Strain
Volumetric Strain given Bulk Modulus
Go Volumetric Strain = Direct Stress/Bulk Modulus
Bulk Modulus given Direct Stress
Go Bulk Modulus = Direct Stress/Volumetric Strain

19 Compression Calculators

Volumetric Strain given Change in Length, Breadth and Width
Go Volumetric Strain = Change in Length/Length of Section+Change in Breadth/Breadth of Bar+Change in Depth/Depth of Bar
28-Day Concrete Compressive Strength
Go 28 Day Compressive Strength of Concrete = 7 Day Compressive Strength+(30*sqrt(7 Day Compressive Strength))
Volumetric Strain given Change in Length
Go Volumetric Strain = (Change in Length /Length of Section)*(1-2*Poisson's Ratio)
Volumetric Strain using Young's Modulus and Poisson's Ratio
Go Volumetric Strain = (3*Tensile Stress*(1-2*Poisson's Ratio))/Young's Modulus
Poisson's Ratio using Bulk Modulus and Young's Modulus
Go Poisson's Ratio = (3*Bulk Modulus-Young's Modulus)/(6*Bulk Modulus)
Poisson's Ratio given Volumetric Strain and Longitudinal Strain
Go Poisson's Ratio = 1/2*(1-Volumetric Strain/Longitudinal Strain)
Longitudinal Strain given Volumetric Strain and Poisson's Ratio
Go Longitudinal Strain = Volumetric Strain/(1-2*Poisson's Ratio)
Volumetric Strain of Cylindrical Rod using Poisson's Ratio
Go Volumetric Strain = Longitudinal Strain*(1-2*Poisson's Ratio)
Lateral Strain given Volumetric and Longitudinal Strain
Go Lateral Strain = -(Longitudinal Strain-Volumetric Strain)/2
Longitudinal Strain given Volumetric and Lateral Strain
Go Longitudinal Strain = Volumetric Strain-(2*Lateral Strain)
Volumetric Strain of Cylindrical Rod
Go Volumetric Strain = Longitudinal Strain-2*(Lateral Strain)
Volumetric Strain given Longitudinal and Lateral Strain
Go Volumetric Strain = Longitudinal Strain+2*Lateral Strain
Bulk Modulus using Young's Modulus
Go Bulk Modulus = Young's Modulus/(3*(1-2*Poisson's Ratio))
Modulus of Rupture of Concrete
Go Modulus of Rupture of Concrete = 7.5*((Characteristic Compressive Strength)^(1/2))
Direct Stress for given Bulk Modulus and Volumetric Strain
Go Direct Stress = Bulk Modulus*Volumetric Strain
Volumetric Strain given Bulk Modulus
Go Volumetric Strain = Direct Stress/Bulk Modulus
Bulk Modulus given Direct Stress
Go Bulk Modulus = Direct Stress/Volumetric Strain
28-Day Concrete Compressive Strength given Water Cement Ratio
Go 28 Day Compressive Strength of Concrete = (2700*Water Cement Ratio)-760
Water Cement Ratio given 28-Day Concrete Compressive Strength
Go Water Cement Ratio = (28 Day Compressive Strength of Concrete+760)/2700

17 Volumetric Strain Calculators

Volumetric Strain given Change in Length, Breadth and Width
Go Volumetric Strain = Change in Length/Length of Section+Change in Breadth/Breadth of Bar+Change in Depth/Depth of Bar
Volumetric Strain given Change in Length
Go Volumetric Strain = (Change in Length /Length of Section)*(1-2*Poisson's Ratio)
Volumetric Strain using Young's Modulus and Poisson's Ratio
Go Volumetric Strain = (3*Tensile Stress*(1-2*Poisson's Ratio))/Young's Modulus
Young's Modulus using Poisson's Ratio
Go Young's Modulus = (3*Tensile Stress*(1-2*Poisson's Ratio))/Volumetric Strain
Poisson's Ratio using Bulk Modulus and Young's Modulus
Go Poisson's Ratio = (3*Bulk Modulus-Young's Modulus)/(6*Bulk Modulus)
Poisson's Ratio given Volumetric Strain and Longitudinal Strain
Go Poisson's Ratio = 1/2*(1-Volumetric Strain/Longitudinal Strain)
Longitudinal Strain given Volumetric Strain and Poisson's Ratio
Go Longitudinal Strain = Volumetric Strain/(1-2*Poisson's Ratio)
Volumetric Strain of Cylindrical Rod using Poisson's Ratio
Go Volumetric Strain = Longitudinal Strain*(1-2*Poisson's Ratio)
Lateral Strain given Volumetric and Longitudinal Strain
Go Lateral Strain = -(Longitudinal Strain-Volumetric Strain)/2
Longitudinal Strain given Volumetric and Lateral Strain
Go Longitudinal Strain = Volumetric Strain-(2*Lateral Strain)
Volumetric Strain of Cylindrical Rod
Go Volumetric Strain = Longitudinal Strain-2*(Lateral Strain)
Volumetric Strain given Longitudinal and Lateral Strain
Go Volumetric Strain = Longitudinal Strain+2*Lateral Strain
Bulk Modulus using Young's Modulus
Go Bulk Modulus = Young's Modulus/(3*(1-2*Poisson's Ratio))
Young's Modulus using Bulk Modulus
Go Young's Modulus = 3*Bulk Modulus*(1-2*Poisson's Ratio)
Direct Stress for given Bulk Modulus and Volumetric Strain
Go Direct Stress = Bulk Modulus*Volumetric Strain
Volumetric Strain given Bulk Modulus
Go Volumetric Strain = Direct Stress/Bulk Modulus
Bulk Modulus given Direct Stress
Go Bulk Modulus = Direct Stress/Volumetric Strain

Volumetric Strain given Bulk Modulus Formula

Volumetric Strain = Direct Stress/Bulk Modulus
εv = σ/K

What is bulk modulus?

The direct stress is proportional to volumetric strain. The constant of proportionality is the bulk modulus. The ratio of direct stress to volumetric strain is called bulk modulus.

How to Calculate Volumetric Strain given Bulk Modulus?

Volumetric Strain given Bulk Modulus calculator uses Volumetric Strain = Direct Stress/Bulk Modulus to calculate the Volumetric Strain, The Volumetric Strain given Bulk Modulus is defined as by dividing the direct stress value by bulk modulus. Volumetric Strain is denoted by εv symbol.

How to calculate Volumetric Strain given Bulk Modulus using this online calculator? To use this online calculator for Volumetric Strain given Bulk Modulus, enter Direct Stress (σ) & Bulk Modulus (K) and hit the calculate button. Here is how the Volumetric Strain given Bulk Modulus calculation can be explained with given input values -> 0.00072 = 18000000/18000000000.

FAQ

What is Volumetric Strain given Bulk Modulus?
The Volumetric Strain given Bulk Modulus is defined as by dividing the direct stress value by bulk modulus and is represented as εv = σ/K or Volumetric Strain = Direct Stress/Bulk Modulus. Direct Stress is the stress developed due to force applied which is parallel or collinear to the axis of the component & The Bulk Modulus is a measure of the ability of a substance to withstand changes in volume when under compression on all sides.
How to calculate Volumetric Strain given Bulk Modulus?
The Volumetric Strain given Bulk Modulus is defined as by dividing the direct stress value by bulk modulus is calculated using Volumetric Strain = Direct Stress/Bulk Modulus. To calculate Volumetric Strain given Bulk Modulus, you need Direct Stress (σ) & Bulk Modulus (K). With our tool, you need to enter the respective value for Direct Stress & Bulk Modulus and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
How many ways are there to calculate Volumetric Strain?
In this formula, Volumetric Strain uses Direct Stress & Bulk Modulus. We can use 18 other way(s) to calculate the same, which is/are as follows -
  • Volumetric Strain = Change in Length/Length of Section+Change in Breadth/Breadth of Bar+Change in Depth/Depth of Bar
  • Volumetric Strain = Longitudinal Strain+2*Lateral Strain
  • Volumetric Strain = (3*Tensile Stress*(1-2*Poisson's Ratio))/Young's Modulus
  • Volumetric Strain = Longitudinal Strain*(1-2*Poisson's Ratio)
  • Volumetric Strain = (Change in Length /Length of Section)*(1-2*Poisson's Ratio)
  • Volumetric Strain = Longitudinal Strain-2*(Lateral Strain)
  • Volumetric Strain = (Change in Length /Length of Section)*(1-2*Poisson's Ratio)
  • Volumetric Strain = Change in Length/Length of Section+Change in Breadth/Breadth of Bar+Change in Depth/Depth of Bar
  • Volumetric Strain = Longitudinal Strain+2*Lateral Strain
  • Volumetric Strain = Longitudinal Strain*(1-2*Poisson's Ratio)
  • Volumetric Strain = (3*Tensile Stress*(1-2*Poisson's Ratio))/Young's Modulus
  • Volumetric Strain = Longitudinal Strain-2*(Lateral Strain)
  • Volumetric Strain = (Change in Length /Length of Section)*(1-2*Poisson's Ratio)
  • Volumetric Strain = Change in Length/Length of Section+Change in Breadth/Breadth of Bar+Change in Depth/Depth of Bar
  • Volumetric Strain = Longitudinal Strain+2*Lateral Strain
  • Volumetric Strain = Longitudinal Strain*(1-2*Poisson's Ratio)
  • Volumetric Strain = (3*Tensile Stress*(1-2*Poisson's Ratio))/Young's Modulus
  • Volumetric Strain = Longitudinal Strain-2*(Lateral Strain)
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!