Angular change when there is maximum distortion of fillet welds
Angular Distortion at x of Fillet Welds
Cooling rate for relatively thin plates
Cross‑sectional area of weld for given transverse shrinkage in butt joints
Degree of restraint (Butt joints)
Depth of root face for minimum distortion of Butt joint
Depth of the first V‑groove for minimum distortion of Butt joint
Depth of the last V‑groove for minimum distortion of Butt joint
Heat required to melt the joint
Heat transfer efficiency, α
Length of fillet leg from transverse shrinkage in T-joints
Length of fillet leg in Lap joints from shrinkage
Length of span for maximum angular distortion of fillet welds
Length of the bent part in bending operation
Maximum Angular Distortion of Fillet Welds
Metal deposited in first pass of welding when transverse shrinkage is known
Net heat per unit volume available for Arc welding
Net heat supplied to achieve given cooling rates for thick plates
Net heat supplied to achieve given cooling rates for thin plates
Net heat supplied to joint
Net heat supplied to weld area to raise it to given temperature from fusion boundary
Net heat supplied when Relative thickness factor is known
Plate thickness for given transverse shrinkage in butt joints
Position of peak temperature from fusion boundary
Power given electric current and resistance
Power given electric potential difference and electric current
Power given electric potential difference and resistance
Rated duty cycle when actual duty cycle is given
Relative plate thickness factor
Root opening when transverse shrinkage is known
Shrinkage of unrestrained joint from given shrinkage of restrained Butt joint
Stock thickness to be used in bending operation
The cooling rate for relatively thick plates
The Peak temperature reached at any point in the material
Thermal conductivity of base metal using given cooling rate (thick plates)
Thermal conductivity of base metal using given cooling rate (thin plates)
Thickness of base metal for desired cooling rate
Thickness of base metal when Relative thickness factor is known
Thickness of bottom plate in T-joints
Thickness of plates in Lap joints
Total heat generated in resistance welding
Total metal deposited in weld when total transverse shrinkage is known
Total transverse shrinkage during multi-pass welding of butt joint
Transverse Shrinkage in Butt Joints
Transverse shrinkage in first pass when total shrinkage is known
Transverse shrinkage in Lap Joint with Fillets
Transverse shrinkage in T-joint with Two Fillets
Transverse shrinkage of restrained joint
Width between the contact points during bending