Actual Diameter of Spring Wire given Actual mean diameter of Conical spring Calculator

✖Actual mean diameter of spring is a straight line passing from side to side through the centre of spring.ⓘ Actual mean diameter of spring [D_{driver a}]			+10% -10%
✖Outer diameter of spring wire is defined as straight line passing from outer side to side through spring wire.ⓘ Outer diameter of spring wire [D_o]			+10% -10%
✖The Nominal Packing Cross-section of Bush Seal is a surface or shape exposed by making a straight cut through something, especially at right angles to an axis.ⓘ Nominal Packing Cross-section of Bush Seal [w]			+10% -10%

✖Diameter of spring wire is the diameter of the wire of which a spring is made.ⓘ Actual Diameter of Spring Wire given Actual mean diameter of Conical spring [d_sw]

⎘ Copy

👎

Formula

✖

Actual Diameter of Spring Wire given Actual mean diameter of Conical spring

Formula

`"d"_{"sw"} = 2*("D"_{"driver a"}+"D"_{"o"}-("w"/2))`

Example

`"21.5mm"=2*("8mm"+"7mm"-("8.5mm"/2))`

Calculator

LaTeX

Reset

👍

Download V Ring Packing Formulas PDF

Actual Diameter of Spring Wire given Actual mean diameter of Conical spring Solution

STEP 0: Pre-Calculation Summary

Formula Used

Diameter of spring wire = 2*(Actual mean diameter of spring+Outer diameter of spring wire-(Nominal Packing Cross-section of Bush Seal/2))
d_sw = 2*(D_{driver a}+D_o-(w/2))
This formula uses 4 Variables

Variables Used

Diameter of spring wire - (Measured in Meter) - Diameter of spring wire is the diameter of the wire of which a spring is made.
Actual mean diameter of spring - (Measured in Meter) - Actual mean diameter of spring is a straight line passing from side to side through the centre of spring.
Outer diameter of spring wire - (Measured in Meter) - Outer diameter of spring wire is defined as straight line passing from outer side to side through spring wire.
Nominal Packing Cross-section of Bush Seal - (Measured in Meter) - The Nominal Packing Cross-section of Bush Seal is a surface or shape exposed by making a straight cut through something, especially at right angles to an axis.

STEP 1: Convert Input(s) to Base Unit

Actual mean diameter of spring: 8 Millimeter --> 0.008 Meter (Check conversion here)
Outer diameter of spring wire: 7 Millimeter --> 0.007 Meter (Check conversion here)
Nominal Packing Cross-section of Bush Seal: 8.5 Millimeter --> 0.0085 Meter (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

d_sw = 2*(D_{driver a}+D_o-(w/2)) --> 2*(0.008+0.007-(0.0085/2))

Evaluating ... ...

d_sw = 0.0215

STEP 3: Convert Result to Output's Unit

0.0215 Meter -->21.5 Millimeter (Check conversion here)

FINAL ANSWER

21.5 Millimeter <-- Diameter of spring wire

(Calculation completed in 00.020 seconds)

You are here -

Home » Physics » Design of Machine Elements » Design of Coupling » Packing » V Ring Packing » Single spring installations » Actual Diameter of Spring Wire given Actual mean diameter of Conical spring

Credits

Created by sanjay shiva

national institute of technology hamirpur (NITH ), hamirpur , himachal pradesh

sanjay shiva has created this Calculator and 100+ more calculators!

Verified by Anshika Arya

National Institute Of Technology (NIT), Hamirpur

Anshika Arya has verified this Calculator and 2500+ more calculators!

< 12 Single spring installations Calculators

Actual Diameter of Spring Wire given Actual mean diameter of Conical spring

Go Diameter of spring wire = 2*(Actual mean diameter of spring+Outer diameter of spring wire-(Nominal Packing Cross-section of Bush Seal/2))

Outer Diameter of spring wire given Actual mean diameter of Conical spring

Go Outer diameter of spring wire = Actual mean diameter of spring-(1/2)*(Nominal Packing Cross-section of Bush Seal+Diameter of spring wire)

Nominal packing cross section given Actual mean diameter of Conical spring

Go Nominal Packing Cross-section of Bush Seal = 2*(Actual mean diameter of spring+Outer diameter of spring wire-(Diameter of spring wire/2))

Actual mean diameter of conical spring

Go Actual mean diameter of spring = Outer diameter of spring wire-(1/2)*(Nominal Packing Cross-section of Bush Seal+Diameter of spring wire)

Actual Mean Diameter of Conical Spring given Deflection of Spring

Go Actual mean diameter of spring = ((Deflection of Conical Spring*Diameter of spring wire)/0.0123)^1/2

Inside diameter of member given Mean diameter of Conical spring

Go Inside Diameter = Mean Diameter of Conical Spring-((3/2)*Nominal Packing Cross-section of Bush Seal)

Mean diameter of conical spring

Go Mean Diameter of Conical Spring = Inside Diameter+((3/2)*Nominal Packing Cross-section of Bush Seal)

Nominal packing cross section given Mean diameter of Conical spring

Go Nominal Packing Cross-section of Bush Seal = (Mean Diameter of Conical Spring-Inside Diameter)*2/3

Deflection of conical spring

Go Deflection of Conical Spring = .0123*((Actual mean diameter of spring)^2)/Diameter of spring wire

Actual Diameter of Spring Wire given Deflection of Spring

Go Diameter of spring wire = .0123*(Actual mean diameter of spring)^2/Deflection of Conical Spring

Diameter of wire for spring given Mean diameter of Conical spring

Go Diameter of spring wire = ((pi*(Mean Diameter of Conical Spring)^2)/139300)^1/3

Mean diameter of conical spring given Diameter of spring wire

Go Mean Diameter of Conical Spring = (((Diameter of spring wire)^3*139300)/pi)^1/2

Actual Diameter of Spring Wire given Actual mean diameter of Conical spring Formula

Diameter of spring wire = 2*(Actual mean diameter of spring+Outer diameter of spring wire-(Nominal Packing Cross-section of Bush Seal/2))
d_sw = 2*(D_{driver a}+D_o-(w/2))

What is Actual diameter of spring wire?

Actual diameter of wire is straight line passing from side to side through spring wire.A unit of linear measurement of magnifying power.

How to Calculate Actual Diameter of Spring Wire given Actual mean diameter of Conical spring?

Actual Diameter of Spring Wire given Actual mean diameter of Conical spring calculator uses Diameter of spring wire = 2*(Actual mean diameter of spring+Outer diameter of spring wire-(Nominal Packing Cross-section of Bush Seal/2)) to calculate the Diameter of spring wire, The Actual Diameter of Spring Wire given Actual mean diameter of Conical spring formula is defined as a straight line passing from side to side through spring wire. Diameter of spring wire is denoted by d_sw symbol.

How to calculate Actual Diameter of Spring Wire given Actual mean diameter of Conical spring using this online calculator? To use this online calculator for Actual Diameter of Spring Wire given Actual mean diameter of Conical spring, enter Actual mean diameter of spring (D_{driver a}), Outer diameter of spring wire (D_o) & Nominal Packing Cross-section of Bush Seal (w) and hit the calculate button. Here is how the Actual Diameter of Spring Wire given Actual mean diameter of Conical spring calculation can be explained with given input values -> 21500 = 2*(0.008+0.007-(0.0085/2)).

FAQ

What is Actual Diameter of Spring Wire given Actual mean diameter of Conical spring?

The Actual Diameter of Spring Wire given Actual mean diameter of Conical spring formula is defined as a straight line passing from side to side through spring wire and is represented as d_sw = 2*(D_{driver a}+D_o-(w/2)) or Diameter of spring wire = 2*(Actual mean diameter of spring+Outer diameter of spring wire-(Nominal Packing Cross-section of Bush Seal/2)). Actual mean diameter of spring is a straight line passing from side to side through the centre of spring, Outer diameter of spring wire is defined as straight line passing from outer side to side through spring wire & The Nominal Packing Cross-section of Bush Seal is a surface or shape exposed by making a straight cut through something, especially at right angles to an axis.

How to calculate Actual Diameter of Spring Wire given Actual mean diameter of Conical spring?

The Actual Diameter of Spring Wire given Actual mean diameter of Conical spring formula is defined as a straight line passing from side to side through spring wire is calculated using Diameter of spring wire = 2*(Actual mean diameter of spring+Outer diameter of spring wire-(Nominal Packing Cross-section of Bush Seal/2)). To calculate Actual Diameter of Spring Wire given Actual mean diameter of Conical spring, you need Actual mean diameter of spring (D_{driver a}), Outer diameter of spring wire (D_o) & Nominal Packing Cross-section of Bush Seal (w). With our tool, you need to enter the respective value for Actual mean diameter of spring, Outer diameter of spring wire & Nominal Packing Cross-section of Bush Seal and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Diameter of spring wire?

In this formula, Diameter of spring wire uses Actual mean diameter of spring, Outer diameter of spring wire & Nominal Packing Cross-section of Bush Seal. We can use 2 other way(s) to calculate the same, which is/are as follows -

Diameter of spring wire = ((pi*(Mean Diameter of Conical Spring)^2)/139300)^1/3
Diameter of spring wire = .0123*(Actual mean diameter of spring)^2/Deflection of Conical Spring

Home

FREE PDFs

🔍 Search