Actual work done when Compressor efficiency and isentropic shaft work is given Calculator

Category	Engineering ↺
Engineering	Chemical Engineering ↺
Chemical-Engineering	Thermodynamics ↺
Thermodynamics	Application of thermodynamics to flow processes ↺

✖Shaft work (Isentropic)is work done by the shaft in a turbine/ compressor when the turbine expands reversibly and adiabatically.ⓘ Shaft work (Isentropic) [W_s (isentropic)]			+10% -10%
✖Compressor efficiency shows how efficient the compressor is in the process.ⓘ Compressor efficiency [ η_c]			+10% -10%

✖Actual shaft work is work done by the shaft in a turbine/ compressor.ⓘ Actual work done when Compressor efficiency and isentropic shaft work is given [W_s]

⎘ Copy

👎 Report Issue!

👍 Share Now!

You are here:

Shivam Sinha

National Institute Of Technology (NIT), Surathkal

Shivam Sinha has created this Calculator and 300+ more calculators!

Akshada Kulkarni

National Institute of Information Technology (NIIT), Neemrana

Akshada Kulkarni has verified this Calculator and 500+ more calculators!

< 6 Other formulas that you can solve using the same Inputs

Actual change in enthalpy when Compressor efficiency and change in enthalpy (isentropic) is given

Change in enthalpy=Change in enthalpy (isentropic)/Compressor efficiency GO

Change in enthalpy (isentropic) when Compressor efficiency and actual change in enthalpy is given

Change in enthalpy (isentropic)=Compressor efficiency*Change in enthalpy GO

Work done (isentropic condition) when Compressor efficiency and actual shaft work is given

Shaft work (Isentropic)=Compressor efficiency*Actual shaft work GO

Compressor efficiency when actual and shaft work (isentropic) is given

Compressor efficiency=Shaft work (Isentropic)/Actual shaft work GO

Actual work done when Turbine efficiency and isentropic shaft work is given

Actual shaft work=Turbine efficiency*Shaft work (Isentropic) GO

Turbine efficiency when actual and shaft work (isentropic) is given

Turbine efficiency=Actual shaft work/Shaft work (Isentropic) GO

< 1 Other formulas that calculate the same Output

Actual work done when Turbine efficiency and isentropic shaft work is given

Actual shaft work=Turbine efficiency*Shaft work (Isentropic) GO

Actual work done when Compressor efficiency and isentropic shaft work is given Formula

Actual shaft work=Shaft work (Isentropic)/Compressor efficiency
Ws=Ws (isentropic)/ ηc

More formulas

Overall Efficiency GO

Nozzle Efficiency GO

Shaft power GO

Work done rate by a turbine (expanders) GO

Change in enthalpy in the turbine (expanders) GO

Mass flow rate of a stream in the turbine (expanders) GO

Turbine efficiency when actual and shaft work (isentropic) is given GO

Compressor efficiency when actual and shaft work (isentropic) is given GO

Actual work done when Turbine efficiency and isentropic shaft work is given GO

Work done (isentropic condition) when Turbine efficiency and actual shaft work is given GO

Work done (isentropic condition) when Compressor efficiency and actual shaft work is given GO

Work done rate (isentropic condition) for adiabatic compression process when Cp is given GO

Work done rate (isentropic condition) for adiabatic compression process when γ is given GO

Enthalpy for pumps when volume expansivity is given for a pump GO

Entropy for pumps when volume expansivity is given for a pump GO

Volume expansivity for pumps when enthalpy is given GO

Volume expansivity for pumps when entropy is given GO

change in enthalpy (isentropic) when Turbine efficiency and actual change in enthalpy is given GO

Change in enthalpy when Turbine efficiency and actual change in enthalpy (isentropic) is given GO

Compressor efficiency when actual and isentropic change in enthalpy is given GO

Actual change in enthalpy when Compressor efficiency and change in enthalpy (isentropic) is given GO

Change in enthalpy (isentropic) when Compressor efficiency and actual change in enthalpy is given GO

Explain working of compressor.

The compression of gases may be accomplished in equipment with rotating blades (like a turbine operating in reverse) or in cylinders with reciprocating pistons. Rotary equipment is used for high-volume flow where the discharge pressure is not too high. For high pressures, reciprocating compressors are often required. The energy equations are independent of the type of equipment; indeed, they are the same as for turbines or expanders because here, too, potential and kinetic energy changes are presumed negligible.

How to Calculate Actual work done when Compressor efficiency and isentropic shaft work is given?

Actual work done when Compressor efficiency and isentropic shaft work is given calculator uses Actual shaft work=Shaft work (Isentropic)/Compressor efficiency to calculate the Actual shaft work, The Actual work done when Compressor efficiency and isentropic shaft work is given formula is defined as the ratio of the shaft work done by the compressor under reversible and adiabatic conditions (which is isentropic condition) to the compressor efficiency. Actual shaft work and is denoted by W_s symbol.

How to calculate Actual work done when Compressor efficiency and isentropic shaft work is given using this online calculator? To use this online calculator for Actual work done when Compressor efficiency and isentropic shaft work is given, enter Shaft work (Isentropic) (W_s (isentropic)) and Compressor efficiency ( η_c) and hit the calculate button. Here is how the Actual work done when Compressor efficiency and isentropic shaft work is given calculation can be explained with given input values -> 200 = 100/0.5.

FAQ

What is Actual work done when Compressor efficiency and isentropic shaft work is given?

The Actual work done when Compressor efficiency and isentropic shaft work is given formula is defined as the ratio of the shaft work done by the compressor under reversible and adiabatic conditions (which is isentropic condition) to the compressor efficiency and is represented as W_s=W_s (isentropic)/ η_c or Actual shaft work=Shaft work (Isentropic)/Compressor efficiency. Shaft work (Isentropic)is work done by the shaft in a turbine/ compressor when the turbine expands reversibly and adiabatically and Compressor efficiency shows how efficient the compressor is in the process.

How to calculate Actual work done when Compressor efficiency and isentropic shaft work is given?

The Actual work done when Compressor efficiency and isentropic shaft work is given formula is defined as the ratio of the shaft work done by the compressor under reversible and adiabatic conditions (which is isentropic condition) to the compressor efficiency is calculated using Actual shaft work=Shaft work (Isentropic)/Compressor efficiency. To calculate Actual work done when Compressor efficiency and isentropic shaft work is given, you need Shaft work (Isentropic) (W_s (isentropic)) and Compressor efficiency ( η_c). With our tool, you need to enter the respective value for Shaft work (Isentropic) and Compressor efficiency and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Actual shaft work?

In this formula, Actual shaft work uses Shaft work (Isentropic) and Compressor efficiency. We can use 1 other way(s) to calculate the same, which is/are as follows -

Actual shaft work=Turbine efficiency*Shaft work (Isentropic)

Facebook
Twitter
WhatsApp
Reddit
LinkedIn
E-Mail

Let Others Know

✖

Facebook

Twitter

Copied!