Angle Made by Belt with Vertical Axis for Open Belt Drive Calculator

✖Radius of Larger Pulley is a straight line from the center to the circumference of pulley.ⓘ Radius of Larger Pulley [r₁]			+10% -10%
✖Radius of Smaller Pulley is a straight line from the center to the circumference of pulley.ⓘ Radius of Smaller Pulley [r₂]			+10% -10%
✖Distance Between Centers of Two Pulleys is the horizontal distance between larger and smaller pulley.ⓘ Distance Between Centers of Two Pulleys [x]			+10% -10%

✖Angle Made By Belt With Vertical Axis is the angle made by a line joining the center of the pulley to the belt with vertical axis.ⓘ Angle Made by Belt with Vertical Axis for Open Belt Drive [α]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Belt Drive Formulas PDF PDF Image

Angle Made by Belt with Vertical Axis for Open Belt Drive Solution

STEP 0: Pre-Calculation Summary

Formula Used

Angle Made By Belt With Vertical Axis = (Radius of Larger Pulley-Radius of Smaller Pulley)/Distance Between Centers of Two Pulleys
α = (r₁-r₂)/x
This formula uses 4 Variables

Variables Used

Angle Made By Belt With Vertical Axis - (Measured in Radian) - Angle Made By Belt With Vertical Axis is the angle made by a line joining the center of the pulley to the belt with vertical axis.
Radius of Larger Pulley - (Measured in Meter) - Radius of Larger Pulley is a straight line from the center to the circumference of pulley.
Radius of Smaller Pulley - (Measured in Meter) - Radius of Smaller Pulley is a straight line from the center to the circumference of pulley.
Distance Between Centers of Two Pulleys - (Measured in Meter) - Distance Between Centers of Two Pulleys is the horizontal distance between larger and smaller pulley.

STEP 1: Convert Input(s) to Base Unit

Radius of Larger Pulley: 10 Meter --> 10 Meter No Conversion Required
Radius of Smaller Pulley: 6 Meter --> 6 Meter No Conversion Required
Distance Between Centers of Two Pulleys: 30.55 Meter --> 30.55 Meter No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

α = (r₁-r₂)/x --> (10-6)/30.55

Evaluating ... ...

α = 0.130932896890344

STEP 3: Convert Result to Output's Unit

0.130932896890344 Radian --> No Conversion Required

FINAL ANSWER

0.130932896890344 ≈ 0.130933 Radian <-- Angle Made By Belt With Vertical Axis

(Calculation completed in 00.004 seconds)

You are here -

Home » Physics » Theory of Machine » Belt, Rope and Chain Drives » Mechanical » Belt Drive » Angle Made by Belt with Vertical Axis for Open Belt Drive

Credits

Created by Anshika Arya

National Institute Of Technology (NIT), Hamirpur

Anshika Arya has created this Calculator and 2000+ more calculators!

Verified by Team Softusvista

Softusvista Office (Pune), India

Team Softusvista has verified this Calculator and 1100+ more calculators!

< Belt Drive Calculators

Relation between Pitch and Pitch Circle Diameter of Chain Drive

LaTeX Go Pitch Circle Diameter of Gear = Pitch of Chain Drive*cosec((180*pi/180)/Number of Teeth on Sprocket)

Torque Exerted on Driven Pulley

LaTeX Go Torque Exerted on Pulley = (Tension in Tight Side of Belt-Tension in Slack Side of Belt)*Diameter of Follower/2

Torque Exerted on Driving Pulley

LaTeX Go Torque Exerted on Pulley = (Tension in Tight Side of Belt-Tension in Slack Side of Belt)*Diameter of Driver/2

Power Transmitted by Belt

LaTeX Go Power Transmitted = (Tension in Tight Side of Belt-Tension in Slack Side of Belt)*Velocity of Belt

Angle Made by Belt with Vertical Axis for Open Belt Drive Formula

LaTeX Go

Angle Made By Belt With Vertical Axis = (Radius of Larger Pulley-Radius of Smaller Pulley)/Distance Between Centers of Two Pulleys
α = (r₁-r₂)/x

What is a belt drive used for?

Belt drive, in machinery, a pair of pulleys attached to usually parallel shafts and connected by an encircling flexible belt (band) that can serve to transmit and modify rotary motion from one shaft to the other.

Difference Between Open Belt Drive and Cross Belt Drive?

In open belt drive, the driving shaft and driven shaft rotate in the same direction. In crossed belt drive, the driving shaft and driven shaft rotate in opposite directions.

How to Calculate Angle Made by Belt with Vertical Axis for Open Belt Drive?

Angle Made by Belt with Vertical Axis for Open Belt Drive calculator uses Angle Made By Belt With Vertical Axis = (Radius of Larger Pulley-Radius of Smaller Pulley)/Distance Between Centers of Two Pulleys to calculate the Angle Made By Belt With Vertical Axis, Angle Made by Belt with Vertical Axis for Open Belt Drive formula is defined as the angle of inclination of the belt with respect to the vertical axis in an open belt drive system, which is a critical parameter in determining the efficiency and performance of the drive system. Angle Made By Belt With Vertical Axis is denoted by α symbol.

How to calculate Angle Made by Belt with Vertical Axis for Open Belt Drive using this online calculator? To use this online calculator for Angle Made by Belt with Vertical Axis for Open Belt Drive, enter Radius of Larger Pulley (r₁), Radius of Smaller Pulley (r₂) & Distance Between Centers of Two Pulleys (x) and hit the calculate button. Here is how the Angle Made by Belt with Vertical Axis for Open Belt Drive calculation can be explained with given input values -> 7.272727 = (10-6)/30.55.

FAQ

What is Angle Made by Belt with Vertical Axis for Open Belt Drive?

Angle Made by Belt with Vertical Axis for Open Belt Drive formula is defined as the angle of inclination of the belt with respect to the vertical axis in an open belt drive system, which is a critical parameter in determining the efficiency and performance of the drive system and is represented as α = (r₁-r₂)/x or Angle Made By Belt With Vertical Axis = (Radius of Larger Pulley-Radius of Smaller Pulley)/Distance Between Centers of Two Pulleys. Radius of Larger Pulley is a straight line from the center to the circumference of pulley, Radius of Smaller Pulley is a straight line from the center to the circumference of pulley & Distance Between Centers of Two Pulleys is the horizontal distance between larger and smaller pulley.

How to calculate Angle Made by Belt with Vertical Axis for Open Belt Drive?

Angle Made by Belt with Vertical Axis for Open Belt Drive formula is defined as the angle of inclination of the belt with respect to the vertical axis in an open belt drive system, which is a critical parameter in determining the efficiency and performance of the drive system is calculated using Angle Made By Belt With Vertical Axis = (Radius of Larger Pulley-Radius of Smaller Pulley)/Distance Between Centers of Two Pulleys. To calculate Angle Made by Belt with Vertical Axis for Open Belt Drive, you need Radius of Larger Pulley (r₁), Radius of Smaller Pulley (r₂) & Distance Between Centers of Two Pulleys (x). With our tool, you need to enter the respective value for Radius of Larger Pulley, Radius of Smaller Pulley & Distance Between Centers of Two Pulleys and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Angle Made By Belt With Vertical Axis?

In this formula, Angle Made By Belt With Vertical Axis uses Radius of Larger Pulley, Radius of Smaller Pulley & Distance Between Centers of Two Pulleys. We can use 1 other way(s) to calculate the same, which is/are as follows -

Angle Made By Belt With Vertical Axis = (Radius of Smaller Pulley+Radius of Larger Pulley)/Distance Between Centers of Two Pulleys

Home

FREE PDFs

🔍 Search