Anshika Arya
National Institute Of Technology (NIT), Hamirpur
Anshika Arya has created this Calculator and 400+ more calculators!

11 Other formulas that you can solve using the same Inputs

Power of a porter governor(if angle made by upper and lower arms are not equal)
Power=(4*Percentage increase in speed^2*(Mass of ball+(Mass of the central load*(1+Ratio of length of link to the length of arm)/2))*Acceleration Due To Gravity*Height of the governor )/(1+(2*Percentage increase in speed)) GO
Coefficient of insensitiveness when lower arm is not attached on the governor axis(Porter governor)
Coefficient of insensitiveness=(Force required at the sleeve to overcome friction*(1+Ratio of length of link to the length of arm)*Radius of the path of rotation of the ball)/(2*Controlling force*Height of the governor ) GO
Corresponding radial force required at each ball for the porter governor
Corresponding radial force required at each ball=(Force required at the sleeve to overcome friction*(1+Ratio of length of link to the length of arm)*Radius of the path of rotation of the ball)/(2*Height of the governor ) GO
Coefficient of insensitiveness when all the arms of porter governor are attached to governor axis
Coefficient of insensitiveness=(Force required at the sleeve to overcome friction*Radius of the path of rotation of the ball)/(Controlling force*Height of the governor ) GO
Power of a porter governor(if angle made by upper and lower arms are equal)
Power=(4*Percentage increase in speed^2*(Mass of ball+Mass of the central load)*Acceleration Due To Gravity*Height of the governor )/(1+(2*Percentage increase in speed)) GO
Lift of the sleeve for porter governor (if angle made by upper and lower arms are not equal)
Lift of sleeve=(1+Ratio of length of link to the length of arm)*(Height of the governor *2*Percentage increase in speed)/(1+(2*Percentage increase in speed)) GO
Centrifugal Force Acting on the Ball When Mass of Ball is Given
Centrifugal force=(Mass of ball*Acceleration Due To Gravity*Radius of the path of rotation of the ball)/Height of the governor GO
The relation between the controlling force and the radius of rotation for isochronous governors
Controlling force=(Distance of main spring from mid-point of lever*Radius of the path of rotation of the ball) GO
Lift of the sleeve for porter governor (if angle made by upper and lower arms are equal)
Lift of sleeve=(2*Height of the governor *2*Percentage increase in speed)/(1+(2*Percentage increase in speed)) GO
Centrifugal force acting on the ball When Weight of Ball is Given
Centrifugal force=(Weight of the ball *Radius of the path of rotation of the ball)/Height of the governor GO
Speed of the ball in rpm (porter governor) when the length of arms are equal to the length of links
Speed in r.p.m=sqrt((Mass of ball+Mass of the central load)*895/(Mass of ball*Height of the governor )) GO

Angle of inclination of the arm to the vertical (porter governor) Formula

Angle of inclination of the arm to the vertical=atan(Radius of the path of rotation of the ball/Height of the governor )
More formulas
Height of the watt governor GO
Force in the arm (porter governor) when weight of central load and ball are given GO
Force in the arm (porter governor) when mass of central load and ball are given GO
Force in the arm (porter governor) when force in the link is known GO
Force in the link (porter governor) when mass of central load is known GO
Force in the link (porter governor) when weight of central load is known GO
Force in the arm (porter governor) when centrifugal force on ball is given GO
Ratio of length of arm to the length of link GO
Height of the governor (porter governor, q=1) GO
Height of the governor (porter governor) GO
Speed of the ball in rpm (porter governor) when the length of arms are equal to the length of links GO
Lift of the sleeve at minimum radius of rotation(Hartnell governor) GO
Lift of the sleeve at maximum radius of rotation(Hartnell governor) GO
Total lift of the sleeve(Hartnell governor) when maximum and the minimum lift is known GO
Total lift of the sleeve(Hartnell governor) GO
Stiffness of the spring (Hartnell governor) when the total lift is given GO
Stiffness of the spring or the force required to compress the spring by one mm(Hartnell governor) GO
Stiffness of the spring when centrifugal force when min and max radius is known(Hartnell governor) GO
Stiffness of the spring when centrifugal force at minimum radius is known(Hartnell governor) GO
Stiffness of the spring when centrifugal force at maximum radius is known(Hartnell governor) GO
Centrifugal force at minimum radius of rotation GO
Centrifugal force at maximum radius of rotation GO
The centrifugal force for any intermediate position (Hartnell governor) GO
The centrifugal force for any intermediate position (Hartnell governor) GO
Centrifugal force for Hartung governor GO
Total downward force on the sleeve in wilson-hartnell governor GO
Centrifugal force on each ball for wilson-hartnell governor GO
Centrifugal force at minimum equilibrium speed on each ball for wilson-hartnell governor GO
Centrifugal force at maximum equilibrium speed on each ball for wilson-hartnell governor GO
Stiffness of each ball spring GO
Deflection of the center of the leaf spring in pickering governor GO
Deflection of the center of the leaf spring in pickering governor GO
Moment of inertia of pickering governor cross-section about the neutral axis GO
Lift of the sleeve corresponding to the deflection GO
Centrifugal force for pickering governor GO
Sensitiveness of the governor when angular speed in r.p.m is given GO
Sensitiveness of the governor when angular speed in r.p.m is given GO
Sensitiveness of the governor when angular speed is given GO
Sensitiveness of the governor when angular speed is given GO
Effort of a porter governor(if angle made by upper and lower arms are equal) GO
Power of a porter governor(if angle made by upper and lower arms are equal) GO
Power of a porter governor(if angle made by upper and lower arms are not equal) GO
Controlling force for porter governor GO
Controlling force for porter governor GO
Speed of the rotation in rpm GO
Angle b/w the axis of radius of rotation and line joining a point on the curve to the origin O GO
Net increase in speed of porter governor GO
Sleeve load for increase in speed value (taking friction into account) GO
Sleeve load for decrease in speed value (taking friction into account) GO
Value of Controlling force for decrease in speed GO
Value of Controlling force for increase in speed GO
Corresponding radial force required at each ball for the porter governor GO
Corresponding radial force required at each ball for spring loaded governors GO
Coefficient of insensitiveness GO
Coefficient of insensitiveness GO
Coefficient of insensitiveness when lower arm is not attached on the governor axis(Porter governor) GO
Coefficient of insensitiveness when all the arms of porter governor are attached to governor axis GO
Coefficient of insensitiveness for porter governor(if angle made by upper and lower arm are equal) GO
Coefficient of insensitiveness for porter governor(if angle made by upper & lower arm aren't equal) GO
Coefficient of insensitiveness for the Hartnell governor GO
Mean equilibrium angular speed GO
Mean equilibrium speed in r.p.m GO
Lift of the sleeve for porter governor (if angle made by upper and lower arms are not equal) GO
Governor power GO
Increased speed GO
Effort of a porter governor(if angle made by upper and lower arms are not equal) GO
Lift of the sleeve for porter governor (if angle made by upper and lower arms are equal) GO
Angle b/w the axis of radius of rotation and line joining a point on the curve to the origin O GO
The relation between the controlling force and the radius of rotation for isochronous governors GO
The relation b/w controlling force and radius of rotation for stability of governor GO
The relation b/w controlling force and radius of rotation for the unstability of governor GO

What is the use of Porter governor?

This Porter Governor is also a type of the Centrifugal Governor with an additional central load on the sleeve to increase the speed of the balls required to lift the sleeve on the spindle. Which will enable the governor to operate the mechanism to give necessary change in the fuel supply.

How to Calculate Angle of inclination of the arm to the vertical (porter governor)?

Angle of inclination of the arm to the vertical (porter governor) calculator uses Angle of inclination of the arm to the vertical=atan(Radius of the path of rotation of the ball/Height of the governor ) to calculate the Angle of inclination of the arm to the vertical, Angle of inclination of the arm to the vertical (porter governor) is the angle formed by the intersection of the line and the x-axis. Angle of inclination of the arm to the vertical and is denoted by α symbol.

How to calculate Angle of inclination of the arm to the vertical (porter governor) using this online calculator? To use this online calculator for Angle of inclination of the arm to the vertical (porter governor), enter Radius of the path of rotation of the ball (r) and Height of the governor (h) and hit the calculate button. Here is how the Angle of inclination of the arm to the vertical (porter governor) calculation can be explained with given input values -> 65.55605 = atan(22/10).

FAQ

What is Angle of inclination of the arm to the vertical (porter governor)?
Angle of inclination of the arm to the vertical (porter governor) is the angle formed by the intersection of the line and the x-axis and is represented as α=atan(r/h) or Angle of inclination of the arm to the vertical=atan(Radius of the path of rotation of the ball/Height of the governor ). Radius of the path of rotation of the ball is the horizontal distance from the centre of the ball to the spindle axis in metres and Height of the governor in metres.
How to calculate Angle of inclination of the arm to the vertical (porter governor)?
Angle of inclination of the arm to the vertical (porter governor) is the angle formed by the intersection of the line and the x-axis is calculated using Angle of inclination of the arm to the vertical=atan(Radius of the path of rotation of the ball/Height of the governor ). To calculate Angle of inclination of the arm to the vertical (porter governor), you need Radius of the path of rotation of the ball (r) and Height of the governor (h). With our tool, you need to enter the respective value for Radius of the path of rotation of the ball and Height of the governor and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
Share Image
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!