Area given Hydraulic Loading Calculator

✖Recirculation Ratio is the ratio of the RAS pumping rate to influent flow rate.ⓘ Recirculation Ratio [α]			+10% -10%
✖Waste water flow are generated from domestic, industrial, and commercial uses.ⓘ Waste water flow [W]			+10% -10%
✖Hydraulic loading is defined in a wastewater treatment process unit as the volume of wastewater applied to the surface of the processing unit per time period.ⓘ Hydraulic loading [H]			+10% -10%

✖The area is the amount of two-dimensional space taken up by an object.ⓘ Area given Hydraulic Loading [A]

⎘ Copy

👎

Formula

✖

Area given Hydraulic Loading

Formula

`"A" = (1+"α")*"W"/("H"*1440)`

Example

`"1050m²"=(1+"1.5")*"28m³/s"/("4m³/d"*1440)`

Calculator

LaTeX

Reset

👍

Download Environmental Engineering Formula PDF

Area given Hydraulic Loading Solution

STEP 0: Pre-Calculation Summary

Formula Used

Area = (1+Recirculation Ratio)*Waste water flow/(Hydraulic loading*1440)
A = (1+α)*W/(H*1440)
This formula uses 4 Variables

Variables Used

Area - (Measured in Square Meter) - The area is the amount of two-dimensional space taken up by an object.
Recirculation Ratio - Recirculation Ratio is the ratio of the RAS pumping rate to influent flow rate.
Waste water flow - (Measured in Cubic Meter per Second) - Waste water flow are generated from domestic, industrial, and commercial uses.
Hydraulic loading - (Measured in Cubic Meter per Second) - Hydraulic loading is defined in a wastewater treatment process unit as the volume of wastewater applied to the surface of the processing unit per time period.

STEP 1: Convert Input(s) to Base Unit

Recirculation Ratio: 1.5 --> No Conversion Required
Waste water flow: 28 Cubic Meter per Second --> 28 Cubic Meter per Second No Conversion Required
Hydraulic loading: 4 Cubic Meter per Day --> 4.62962962962963E-05 Cubic Meter per Second (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

A = (1+α)*W/(H*1440) --> (1+1.5)*28/(4.62962962962963E-05*1440)

Evaluating ... ...

A = 1050

STEP 3: Convert Result to Output's Unit

1050 Square Meter --> No Conversion Required

FINAL ANSWER

1050 Square Meter <-- Area

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Civil » Environmental Engineering » Design of trickling filter using NRC equations » Area given Hydraulic Loading

Credits

Created by Ishita Goyal

Meerut Institute of Engineering and Technology (MIET), Meerut

Ishita Goyal has created this Calculator and 500+ more calculators!

Verified by Suraj Kumar

Birsa Institute of Technology (BIT), Sindri

Suraj Kumar has verified this Calculator and 600+ more calculators!

< 2 Design of trickling filter using NRC equations Calculators

Hydraulic Loading to each Filter

Go Hydraulic loading = (1+Recirculation Ratio)*Waste water flow/(Area*1440)

Area given Hydraulic Loading

Go Area = (1+Recirculation Ratio)*Waste water flow/(Hydraulic loading*1440)

Area given Hydraulic Loading Formula

Area = (1+Recirculation Ratio)*Waste water flow/(Hydraulic loading*1440)
A = (1+α)*W/(H*1440)

What is hydraulic loading?

Hydraulic loading is defined in a wastewater treatment process unit as the volume of wastewater applied to the surface of the process unit per time period. It is often expressed in gallons per day per square foot (gpd/ft2).

How to Calculate Area given Hydraulic Loading?

Area given Hydraulic Loading calculator uses Area = (1+Recirculation Ratio)*Waste water flow/(Hydraulic loading*1440) to calculate the Area, The Area given Hydraulic Loading is the total area of the trickling filter calculated using the values of hydraulic loading, recirculation factor, and wastewater flow discharge. Area is denoted by A symbol.

How to calculate Area given Hydraulic Loading using this online calculator? To use this online calculator for Area given Hydraulic Loading, enter Recirculation Ratio (α), Waste water flow (W) & Hydraulic loading (H) and hit the calculate button. Here is how the Area given Hydraulic Loading calculation can be explained with given input values -> 1050 = (1+1.5)*28/(4.62962962962963E-05*1440).

FAQ

What is Area given Hydraulic Loading?

The Area given Hydraulic Loading is the total area of the trickling filter calculated using the values of hydraulic loading, recirculation factor, and wastewater flow discharge and is represented as A = (1+α)*W/(H*1440) or Area = (1+Recirculation Ratio)*Waste water flow/(Hydraulic loading*1440). Recirculation Ratio is the ratio of the RAS pumping rate to influent flow rate, Waste water flow are generated from domestic, industrial, and commercial uses & Hydraulic loading is defined in a wastewater treatment process unit as the volume of wastewater applied to the surface of the processing unit per time period.

How to calculate Area given Hydraulic Loading?

The Area given Hydraulic Loading is the total area of the trickling filter calculated using the values of hydraulic loading, recirculation factor, and wastewater flow discharge is calculated using Area = (1+Recirculation Ratio)*Waste water flow/(Hydraulic loading*1440). To calculate Area given Hydraulic Loading, you need Recirculation Ratio (α), Waste water flow (W) & Hydraulic loading (H). With our tool, you need to enter the respective value for Recirculation Ratio, Waste water flow & Hydraulic loading and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search