Area when water flow equation is given Calculator

Category	Engineering ↺
Engineering	Civil ↺
Civil	Environmental Engineering ↺
Environmental-Engineering	Flow velocity in straight sewers ↺
Flow-Velocity-In-Straight-Sewers

✖water flow is rate of flow of water.ⓘ water flow [Q]			+10% -10%
✖flow velocity is the velocity of the flow of any fluid.ⓘ flow velocity [V]			+10% -10%

✖Cross sectional area is the area of a two-dimensional shape that is obtained when a three dimensional shape is sliced perpendicular to some specifies axis at a point.ⓘ Area when water flow equation is given [A]

⎘ Copy

👎 Report Issue!

👍 Share Now!

You are here:

Mridul Sharma

Indian Institute of Information Technology (IIIT), Bhopal

Mridul Sharma has created this Calculator and 100+ more calculators!

Chandana P Dev

NSS College of Engineering (NSSCE), Palakkad

Chandana P Dev has verified this Calculator and 500+ more calculators!

< 11 Other formulas that you can solve using the same Inputs

Conversion factor when flow velocity is given

conversion factor=((flow velocity*roughness coefficient of conduit surface)/((energy loss^(1/2))*hydraulic radius^(2/3))) GO

Hydraulic radius when flow velocity is given

hydraulic radius=((flow velocity*roughness coefficient of conduit surface)/(conversion factor*energy loss^(1/2)))^(3/2) GO

Roughness coefficient when flow velocity is given

roughness coefficient of conduit surface=(conversion factor*hydraulic radius^(2/3)*energy loss^(1/2))/flow velocity GO

Energy loss when flow velocity is given

energy loss=((flow velocity*roughness coefficient of conduit surface)/(conversion factor*hydraulic radius^(2/3)))^2 GO

Inside diameter when full flow velocity in sewer is given

Inner Diameter=((flow velocity*roughness coefficient of conduit surface)/(0.59*energy loss^(1/2)))^(3/2) GO

Inside diameter when flow quantity for a full flowing sewer is given

Inner Diameter=((water flow*roughness coefficient of conduit surface)/(0.463*energy loss^(1/2)))^(3/8) GO

Coefficient of roughness when full flow velocity in sewer is given

roughness coefficient of conduit surface=(0.59*Inner Diameter^(2/3)*energy loss^(1/2))/flow velocity GO

Energy loss when full flow velocity in sewer is given

energy loss=((flow velocity*roughness coefficient of conduit surface)/(0.59*Inner Diameter^(2/3)))^2 GO

Coefficient of roughness when flow quantity for a full flowing sewer is given

roughness coefficient of conduit surface=(0.463*energy loss^(1/2)*Inner Diameter^(8/3))/water flow GO

Velocity when water flow equation is given

flow velocity=water flow/Cross sectional area GO

Water flow equation

water flow=Cross sectional area*flow velocity GO

< 11 Other formulas that calculate the same Output

Cross-Sectional Area When Stress is Applied at Point y in a Curved Beam

Cross sectional area=(Bending Moment /(Stress*Radius of Centroidal Axis))*(1+(Distance of Point from Centroidal Axis/(Cross-Section Property*(Radius of Centroidal Axis+Distance of Point from Centroidal Axis)))) GO

Cross-Sectional Area when Axial Buckling Load for a Warped Section is Given

Cross sectional area=(Axial buckling Load*Polar moment of Inertia)/(Shear Modulus of Elasticity*Torsion constant+((pi^2)*Young's Modulus*Warping Constant/(Length^2))) GO

Cross-Sectional Area when Total Unit Stress in Eccentric Loading is Given

Cross sectional area=Axial Load/(Total Unit Stress-((Axial Load*Outermost Fiber Distance*Distance_from Load Applied/Moment of Inertia about Neutral Axis))) GO

Cross-sectional area of the rod if stress induced in rod due to impact load is known

Cross sectional area=(2*Modulus Of Elasticity*Load Dropped(Impact Load)*Height through which load is dropped)/(Length of Rod*(Stress induced^2)) GO

Cross-Sectional Area when Elastic Critical Buckling Load is Given

Cross sectional area=(Critical Buckling Load*((Coefficient for Column End Conditions*Length/Radius of gyration)^2))/((pi^2)*Young's Modulus) GO

Cross-Sectional Area when Maximum Stress For Short Beams is Given

Cross sectional area=Axial Load/(Maximum stress at crack tip-(Maximum Bending Moment*Distance from the Neutral axis/Moment of Inertia)) GO

Tape Cross-Sectional Area when Temperature Corrections for Nonstandard Tension is Given

Cross sectional area=((Pull on Tape-Total Tension)*Unsupported length)/(Temperature correction*Modulus of elasticity) GO

Cross-Sectional Area when Torsional Buckling Load for Pin Ended Columns is Given

Cross sectional area=Torsional buckling load*Polar moment of Inertia/(Shear Modulus of Elasticity*Torsion constant) GO

Cross-Sectional Area when Critical Buckling Load for Pin Ended Columns is Given

Cross sectional area=Critical Buckling Load*(Slenderness Ratio^2)/((pi^2)*Young's Modulus) GO

Cross-sectional Area of Soil Conveying Flow when Rate of Flow of Water is Given

Cross sectional area=(Rate of flow/(Coefficient of permeability*Hydraulic gradient)) GO

Total Cross-Sectional Area of Tensile Reinforcing

Cross sectional area=8*Bending moment/(7*Reinforcement Stress*Depth of the Beam) GO

Area when water flow equation is given Formula

Cross sectional area=water flow/flow velocity
A=Q/V

More formulas

Flow velocity using Manning's formula GO

Roughness coefficient when flow velocity is given GO

Hydraulic radius when flow velocity is given GO

Energy loss when flow velocity is given GO

Conversion factor when flow velocity is given GO

Water flow equation GO

Velocity when water flow equation is given GO

What is the difference between flow rate and velocity?

Rate of flow, or simply flow, is the quantity of water, for example, that flows in a tube or other medium, in an interval of time. Examples: 2 kg of water per second, or 100 cubic meters of air per minute. Velocity is how fast the water, air or other fluid is moving in a tube or other medium.

How to Calculate Area when water flow equation is given?

Area when water flow equation is given calculator uses Cross sectional area=water flow/flow velocity to calculate the Cross sectional area, The Area when water flow equation is given, calculates the cross sectional area through which fluid is flowing when water flow and flow velocity are known to us. Cross sectional area and is denoted by A symbol.

How to calculate Area when water flow equation is given using this online calculator? To use this online calculator for Area when water flow equation is given, enter water flow (Q) and flow velocity (V) and hit the calculate button. Here is how the Area when water flow equation is given calculation can be explained with given input values -> 0.3048 = 0.304800000001219/1.

FAQ

What is Area when water flow equation is given?

The Area when water flow equation is given, calculates the cross sectional area through which fluid is flowing when water flow and flow velocity are known to us and is represented as A=Q/V or Cross sectional area=water flow/flow velocity. water flow is rate of flow of water and flow velocity is the velocity of the flow of any fluid.

How to calculate Area when water flow equation is given?

The Area when water flow equation is given, calculates the cross sectional area through which fluid is flowing when water flow and flow velocity are known to us is calculated using Cross sectional area=water flow/flow velocity. To calculate Area when water flow equation is given, you need water flow (Q) and flow velocity (V). With our tool, you need to enter the respective value for water flow and flow velocity and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Cross sectional area?

In this formula, Cross sectional area uses water flow and flow velocity. We can use 11 other way(s) to calculate the same, which is/are as follows -

Cross sectional area=(Bending Moment /(Stress*Radius of Centroidal Axis))*(1+(Distance of Point from Centroidal Axis/(Cross-Section Property*(Radius of Centroidal Axis+Distance of Point from Centroidal Axis))))
Cross sectional area=Axial Load/(Maximum stress at crack tip-(Maximum Bending Moment*Distance from the Neutral axis/Moment of Inertia))
Cross sectional area=Axial Load/(Total Unit Stress-((Axial Load*Outermost Fiber Distance*Distance_from Load Applied/Moment of Inertia about Neutral Axis)))
Cross sectional area=Critical Buckling Load*(Slenderness Ratio^2)/((pi^2)*Young's Modulus)
Cross sectional area=(Critical Buckling Load*((Coefficient for Column End Conditions*Length/Radius of gyration)^2))/((pi^2)*Young's Modulus)
Cross sectional area=Torsional buckling load*Polar moment of Inertia/(Shear Modulus of Elasticity*Torsion constant)
Cross sectional area=(Axial buckling Load*Polar moment of Inertia)/(Shear Modulus of Elasticity*Torsion constant+((pi^2)*Young's Modulus*Warping Constant/(Length^2)))
Cross sectional area=8*Bending moment/(7*Reinforcement Stress*Depth of the Beam)
Cross sectional area=((Pull on Tape-Total Tension)*Unsupported length)/(Temperature correction*Modulus of elasticity)
Cross sectional area=(2*Modulus Of Elasticity*Load Dropped(Impact Load)*Height through which load is dropped)/(Length of Rod*(Stress induced^2))
Cross sectional area=(Rate of flow/(Coefficient of permeability*Hydraulic gradient))

Facebook
Twitter
WhatsApp
Reddit
LinkedIn
E-Mail

Let Others Know

✖

Facebook

Twitter

Copied!