Average Tensile Stress in Butt Weld Calculator

✖Tensile Force on Welded Plates is the stretching force acting on the plates that are welded.ⓘ Tensile Force on Welded Plates [P]			+10% -10%
✖The Length of Weld is the linear distance of the welding segment joined by the welded joint.ⓘ Length of Weld [L]			+10% -10%
✖Throat thickness of weld is the shortest distance from the root to the face of the weld.ⓘ Throat Thickness of Weld [h_t]			+10% -10%

✖Tensile Stress in Weld is the average stress experienced by the Weld Beads when the joint plates are brought to tension.ⓘ Average Tensile Stress in Butt Weld [σ_t]

⎘ Copy

👎

Formula

✖

Average Tensile Stress in Butt Weld

Formula

`"σ"_{"t"} = "P"/("L"*"h"_{"t"})`

Example

`"56.41026N/mm²"="16.5kN"/("19.5mm"*"15mm")`

Calculator

LaTeX

Reset

👍

Download Butt Welds Formulas PDF PDF Image

Average Tensile Stress in Butt Weld Solution

STEP 0: Pre-Calculation Summary

Formula Used

Tensile Stress in Weld = Tensile Force on Welded Plates/(Length of Weld*Throat Thickness of Weld)
σ_t = P/(L*h_t)
This formula uses 4 Variables

Variables Used

Tensile Stress in Weld - (Measured in Pascal) - Tensile Stress in Weld is the average stress experienced by the Weld Beads when the joint plates are brought to tension.
Tensile Force on Welded Plates - (Measured in Newton) - Tensile Force on Welded Plates is the stretching force acting on the plates that are welded.
Length of Weld - (Measured in Meter) - The Length of Weld is the linear distance of the welding segment joined by the welded joint.
Throat Thickness of Weld - (Measured in Meter) - Throat thickness of weld is the shortest distance from the root to the face of the weld.

STEP 1: Convert Input(s) to Base Unit

Tensile Force on Welded Plates: 16.5 Kilonewton --> 16500 Newton (Check conversion here)
Length of Weld: 19.5 Millimeter --> 0.0195 Meter (Check conversion here)
Throat Thickness of Weld: 15 Millimeter --> 0.015 Meter (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

σ_t = P/(L*h_t) --> 16500/(0.0195*0.015)

Evaluating ... ...

σ_t = 56410256.4102564

STEP 3: Convert Result to Output's Unit

56410256.4102564 Pascal -->56.4102564102564 Newton per Square Millimeter (Check conversion here)

FINAL ANSWER

56.4102564102564 ≈ 56.41026 Newton per Square Millimeter <-- Tensile Stress in Weld

(Calculation completed in 00.004 seconds)

You are here -

Home » Physics » Design of Machine Elements » Design of Coupling » Welded Joints » Butt Welds » Average Tensile Stress in Butt Weld

Credits

Created by Kumar Siddhant

Indian Institute of Information Technology, Design and Manufacturing (IIITDM), Jabalpur

Kumar Siddhant has created this Calculator and 400+ more calculators!

Verified by Kethavath Srinath

Osmania University (OU), Hyderabad

Kethavath Srinath has verified this Calculator and 1200+ more calculators!

< 16 Butt Welds Calculators

Permissible Tensile Stress in Butt Weld given Efficiency of Welded joint

Go Tensile Stress in Weld = Tensile Force on Welded Plates/(Welded Base Plate Thickness*Length of Weld*Efficiency of Welded Joints)

Thickness of Plate given Efficiency of Butt Welded Joint

Go Welded Base Plate Thickness = Tensile Force on Welded Plates/(Tensile Stress in Weld*Length of Weld*Efficiency of Welded Joints)

Length of Butt Weld given Efficiency of Welded Joint

Go Length of Weld = Tensile Force on Welded Plates/(Tensile Stress in Weld*Welded Base Plate Thickness*Efficiency of Welded Joints)

Efficiency of Butt Welded Joint

Go Efficiency of Welded Joints = Tensile Force on Welded Plates/(Tensile Stress in Weld*Welded Base Plate Thickness*Length of Weld)

Tensile Force on Plates given Efficiency of Butt Welded Joint

Go Tensile Force on Welded Plates = Tensile Stress in Weld*Welded Base Plate Thickness*Length of Weld*Efficiency of Welded Joints

Tensile Stress in Boiler Butt Weld given Thickness of Boiler Shell

Go Tensile Stress in Boiler Butt Weld = Internal pressure in boiler*Inner diameter of boiler/(2*Thickness of Boiler Wall)

Thickness of Welded Boiler Shell given Stress in Weld

Go Thickness of Boiler Wall = Internal pressure in boiler*Inner diameter of boiler/(2*Tensile Stress in Boiler Butt Weld)

Internal Pressure in Boiler given Thickness of Welded Boiler Shell

Go Internal pressure in boiler = Thickness of Boiler Wall*2*Tensile Stress in Boiler Butt Weld/Inner diameter of boiler

Inner Diameter of Boiler given Thickness of Welded Boiler Shell

Go Inner diameter of boiler = Thickness of Boiler Wall*2*Tensile Stress in Boiler Butt Weld/Internal pressure in boiler

Strength of Butt Welded Joint

Go Tensile Stress in Butt Weld = Tensile Force on Welded Plates/(Throat Thickness of Weld*Length of Butt Weld)

Permissible Tensile Stress in Butt Weld

Go Tensile Stress in Weld = Tensile Force on Welded Plates/(Length of Weld*Welded Base Plate Thickness)

Length of Butt Weld given Average Tensile Stress in Weld

Go Length of Weld = Tensile Force on Welded Plates/(Tensile Stress in Weld*Throat Thickness of Weld)

Throat of Butt Weld given Average Tensile Stress

Go Throat Thickness of Weld = Tensile Force on Welded Plates/(Length of Weld*Tensile Stress in Weld)

Average Tensile Stress in Butt Weld

Go Tensile Stress in Weld = Tensile Force on Welded Plates/(Length of Weld*Throat Thickness of Weld)

Tensile Force on Plates given Average Tensile Stress in Butt Weld

Go Tensile Force on Welded Plates = Tensile Stress in Weld*Throat Thickness of Weld*Length of Weld

Tensile Force on Butt Welded Plates given Thickness of Plate

Go Tensile Force on Welded Plates = Tensile Stress in Weld*Length of Weld*Throat Thickness of Weld

Average Tensile Stress in Butt Weld Formula

Tensile Stress in Weld = Tensile Force on Welded Plates/(Length of Weld*Throat Thickness of Weld)
σ_t = P/(L*h_t)

Effective Area of Weld for Tensile Stress

Effective Area of Weld also known as Throat Area is the minimum area of weld that holds the plates together and resists the tension force acting on the plates.
It is the projection of the Surface Area of Weld Beads onto the plate boundary.

How to Calculate Average Tensile Stress in Butt Weld?

Average Tensile Stress in Butt Weld calculator uses Tensile Stress in Weld = Tensile Force on Welded Plates/(Length of Weld*Throat Thickness of Weld) to calculate the Tensile Stress in Weld, Average Tensile Stress in Butt Weld is the stress experienced by the Weld Beads on joint surfaces when the surfaces are exposed to tension. Tensile Stress in Weld is denoted by σ_t symbol.

How to calculate Average Tensile Stress in Butt Weld using this online calculator? To use this online calculator for Average Tensile Stress in Butt Weld, enter Tensile Force on Welded Plates (P), Length of Weld (L) & Throat Thickness of Weld (h_t) and hit the calculate button. Here is how the Average Tensile Stress in Butt Weld calculation can be explained with given input values -> 5.6E-6 = 16500/(0.0195*0.015).

FAQ

What is Average Tensile Stress in Butt Weld?

Average Tensile Stress in Butt Weld is the stress experienced by the Weld Beads on joint surfaces when the surfaces are exposed to tension and is represented as σ_t = P/(L*h_t) or Tensile Stress in Weld = Tensile Force on Welded Plates/(Length of Weld*Throat Thickness of Weld). Tensile Force on Welded Plates is the stretching force acting on the plates that are welded, The Length of Weld is the linear distance of the welding segment joined by the welded joint & Throat thickness of weld is the shortest distance from the root to the face of the weld.

How to calculate Average Tensile Stress in Butt Weld?

Average Tensile Stress in Butt Weld is the stress experienced by the Weld Beads on joint surfaces when the surfaces are exposed to tension is calculated using Tensile Stress in Weld = Tensile Force on Welded Plates/(Length of Weld*Throat Thickness of Weld). To calculate Average Tensile Stress in Butt Weld, you need Tensile Force on Welded Plates (P), Length of Weld (L) & Throat Thickness of Weld (h_t). With our tool, you need to enter the respective value for Tensile Force on Welded Plates, Length of Weld & Throat Thickness of Weld and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Tensile Stress in Weld?

In this formula, Tensile Stress in Weld uses Tensile Force on Welded Plates, Length of Weld & Throat Thickness of Weld. We can use 2 other way(s) to calculate the same, which is/are as follows -

Tensile Stress in Weld = Tensile Force on Welded Plates/(Length of Weld*Welded Base Plate Thickness)
Tensile Stress in Weld = Tensile Force on Welded Plates/(Welded Base Plate Thickness*Length of Weld*Efficiency of Welded Joints)

Home

FREE PDFs

🔍 Search