BOD Per Day given Volumetric Loading in Anaerobic Digester Solution

STEP 0: Pre-Calculation Summary
Formula Used
BOD per day = (Volumetric loading*Volumetric Flow Rate)
BODday = (Vl*V)
This formula uses 3 Variables
Variables Used
BOD per day - (Measured in Kilogram per Second) - BOD per day is defined as biological oxygen demand in terms of mass flow rate.
Volumetric loading - (Measured in Kilogram per Cubic Meter) - Volumetric loading is defined in terms of density.
Volumetric Flow Rate - (Measured in Cubic Meter per Second) - Volumetric Flow Rate is the volume of fluid which passes per unit time.
STEP 1: Convert Input(s) to Base Unit
Volumetric loading: 2 Kilogram per Cubic Meter --> 2 Kilogram per Cubic Meter No Conversion Required
Volumetric Flow Rate: 5 Cubic Meter per Second --> 5 Cubic Meter per Second No Conversion Required
STEP 2: Evaluate Formula
Substituting Input Values in Formula
BODday = (Vl*V) --> (2*5)
Evaluating ... ...
BODday = 10
STEP 3: Convert Result to Output's Unit
10 Kilogram per Second -->864000 Kilogram per Day (Check conversion here)
FINAL ANSWER
864000 Kilogram per Day <-- BOD per day
(Calculation completed in 00.004 seconds)

Credits

Created by Suraj Kumar
Birsa Institute of Technology (BIT), Sindri
Suraj Kumar has created this Calculator and 2200+ more calculators!
Verified by Ishita Goyal
Meerut Institute of Engineering and Technology (MIET), Meerut
Ishita Goyal has verified this Calculator and 2600+ more calculators!

20 Design of an Anaerobic Digester Calculators

Endogenous Coefficient given Quantity of Volatile Solids
Go Endogenous coefficient = (1/Mean Cell Residence Time)-(Yield coefficient*(BOD in-BOD out)/(Volatile Solids produced*Mean Cell Residence Time))
Mean Cell Residence Time given Quantity of Volatile Solids
Go Mean Cell Residence Time = (1/Endogenous coefficient)-(Yield coefficient*(BOD in-BOD out)/(Volatile Solids produced*Endogenous coefficient))
Yield Coefficient given Quantity of Volatile Solids
Go Yield coefficient = (Volatile Solids produced*(1-Mean Cell Residence Time*Endogenous coefficient))/(BOD in-BOD out)
Quantity of Volatile Solids Produced Each Day
Go Volatile Solids produced = (Yield coefficient*(BOD in-BOD out))/(1-Endogenous coefficient*Mean Cell Residence Time)
BOD Out given Quantity of Volatile Solids
Go BOD out = BOD in-(Volatile Solids produced/Yield coefficient)*(1-Endogenous coefficient*Mean Cell Residence Time)
BOD in given Quantity of Volatile Solids
Go BOD in = (Volatile Solids produced/Yield coefficient)*(1-Endogenous coefficient*Mean Cell Residence Time)+BOD out
Volatile Solids produced given Percent Stabilization
Go Volatile Solids produced = (1/1.42)*(BOD in-BOD out-((Percent stabilization*BOD in)/100))
BOD Out given Percent Stabilization
Go BOD out = (BOD in*100-142*Volatile Solids produced-Percent stabilization*BOD in)/100
Percent Stabilization
Go Percent stabilization = ((BOD in-BOD out-1.42*Volatile Solids produced)/BOD in)*100
BOD in given Percent Stabilization
Go BOD in = (BOD out*100+142*Volatile Solids produced)/(100-Percent stabilization)
Volatile Solids produced given Volume of Methane Gas produced
Go Volatile Solids produced = (1/1.42)*(BOD in-BOD out-(Volume of methane/5.62))
BOD Out given Volume of Methane Gas Produced
Go BOD out = (BOD in-(Volume of methane/5.62)-(1.42*Volatile Solids produced))
BOD in given Volume of Methane Gas Produced
Go BOD in = (Volume of methane/5.62)+BOD out+(1.42*Volatile Solids produced)
Volume of Methane Gas Produced at Standard Conditions
Go Volume of methane = 5.62*(BOD in-BOD out-1.42*Volatile Solids produced)
Influent Sludge Flow Rate given Volume Required for Anaerobic Digester
Go Influent Sludge Flow Rate = (Volume/Hydraulic retention time)
Hydraulic Retention Time given Volume Required for Anaerobic Digester
Go Hydraulic Retention Time = (Volume/Influent Sludge Flow Rate)
Volume Required for Anaerobic Digester
Go Volume = (Hydraulic retention time*Influent Sludge Flow Rate)
Volumetric Flow Rate given Volumetric Loading in Anaerobic Digester
Go Volumetric Flow Rate = (BOD per day/Volumetric loading)
BOD Per Day given Volumetric Loading in Anaerobic Digester
Go BOD per day = (Volumetric loading*Volumetric Flow Rate)
Volumetric Loading in Anaerobic Digester
Go Volumetric loading = (BOD per day/Volumetric Flow Rate)

BOD Per Day given Volumetric Loading in Anaerobic Digester Formula

BOD per day = (Volumetric loading*Volumetric Flow Rate)
BODday = (Vl*V)

What is BOD ?

Biological oxygen demand (BOD) (also called biochemical oxygen demand) refers to the amount of oxygen that would be consumed if all the organic materials in a one liter water sample were oxidised by bacteria and protozoa. The units are typically milligrams of oxygen per liter.

How to Calculate BOD Per Day given Volumetric Loading in Anaerobic Digester?

BOD Per Day given Volumetric Loading in Anaerobic Digester calculator uses BOD per day = (Volumetric loading*Volumetric Flow Rate) to calculate the BOD per day, The BOD Per Day given Volumetric Loading in Anaerobic Digester formula calculates biological oxygen demand when other parameters are known. BOD per day is denoted by BODday symbol.

How to calculate BOD Per Day given Volumetric Loading in Anaerobic Digester using this online calculator? To use this online calculator for BOD Per Day given Volumetric Loading in Anaerobic Digester, enter Volumetric loading (Vl) & Volumetric Flow Rate (V) and hit the calculate button. Here is how the BOD Per Day given Volumetric Loading in Anaerobic Digester calculation can be explained with given input values -> 7.5E+10 = (2*5).

FAQ

What is BOD Per Day given Volumetric Loading in Anaerobic Digester?
The BOD Per Day given Volumetric Loading in Anaerobic Digester formula calculates biological oxygen demand when other parameters are known and is represented as BODday = (Vl*V) or BOD per day = (Volumetric loading*Volumetric Flow Rate). Volumetric loading is defined in terms of density & Volumetric Flow Rate is the volume of fluid which passes per unit time.
How to calculate BOD Per Day given Volumetric Loading in Anaerobic Digester?
The BOD Per Day given Volumetric Loading in Anaerobic Digester formula calculates biological oxygen demand when other parameters are known is calculated using BOD per day = (Volumetric loading*Volumetric Flow Rate). To calculate BOD Per Day given Volumetric Loading in Anaerobic Digester, you need Volumetric loading (Vl) & Volumetric Flow Rate (V). With our tool, you need to enter the respective value for Volumetric loading & Volumetric Flow Rate and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!