Buoyant Force on Cores from Chaplet Area Calculator

✖Chaplet Area is the surface area of a chaplet, a metal support used in casting to prevent deformation or distortion of the casting mold.ⓘ Chaplet Area [a]			+10% -10%
✖Empirical Constant is the constant used in an empirical relation. It can vary depending on the specific casting material and they are derived from data obtained from actual casting operations.ⓘ Empirical Constant [c]			+10% -10%
✖Core print area is the area of that part of the mould which supports the weight of core used in casting.ⓘ Core Print Area [A]			+10% -10%

✖Buoyant Force is the upward force exerted by any fluid upon a body placed in it.ⓘ Buoyant Force on Cores from Chaplet Area [F_b]

⎘ Copy

👎

Formula

✖

Buoyant Force on Cores from Chaplet Area

Formula

`"F"_{"b "} = "a"/29+"c"*"A"`

Example

`"1500N"="2900m²"/29+"350N/mm²"*"0.000004m²"`

Calculator

LaTeX

Reset

👍

Download Casting (Foundry) Formula PDF PDF Image

Buoyant Force on Cores from Chaplet Area Solution

STEP 0: Pre-Calculation Summary

Formula Used

Buoyant Force = Chaplet Area/29+Empirical Constant*Core Print Area
F_b = a/29+c*A
This formula uses 4 Variables

Variables Used

Buoyant Force - (Measured in Newton) - Buoyant Force is the upward force exerted by any fluid upon a body placed in it.
Chaplet Area - (Measured in Square Meter) - Chaplet Area is the surface area of a chaplet, a metal support used in casting to prevent deformation or distortion of the casting mold.
Empirical Constant - (Measured in Pascal) - Empirical Constant is the constant used in an empirical relation. It can vary depending on the specific casting material and they are derived from data obtained from actual casting operations.
Core Print Area - (Measured in Square Meter) - Core print area is the area of that part of the mould which supports the weight of core used in casting.

STEP 1: Convert Input(s) to Base Unit

Chaplet Area: 2900 Square Meter --> 2900 Square Meter No Conversion Required
Empirical Constant: 350 Newton per Square Millimeter --> 350000000 Pascal (Check conversion here)
Core Print Area: 4E-06 Square Meter --> 4E-06 Square Meter No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

F_b = a/29+c*A --> 2900/29+350000000*4E-06

Evaluating ... ...

F_b = 1500

STEP 3: Convert Result to Output's Unit

1500 Newton --> No Conversion Required

FINAL ANSWER

1500 Newton <-- Buoyant Force

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Production Engineering » Casting (Foundry) » Cores - Core Prints and Chaplets » Buoyant Force on Cores from Chaplet Area

Credits

Created by Rajat Vishwakarma

University Institute of Technology RGPV (UIT - RGPV), Bhopal

Rajat Vishwakarma has created this Calculator and 400+ more calculators!

Verified by Nishan Poojary

Shri Madhwa Vadiraja Institute of Technology and Management (SMVITM), Udupi

Nishan Poojary has verified this Calculator and 400+ more calculators!

< 13 Cores - Core Prints and Chaplets Calculators

Buoyant Force on Vertical Cores

Go Buoyant Force = (pi/4*(Diameter of Core Print^2-Diameter of Cylinder^2)*Height of Core Print*Density of Metal-Volume of the Core*Density of Core)*[g]

Buoyant Force on Cylindrical Cores Placed Horizontally

Go Buoyant Force = pi/4*Diameter of Cylinder^2*[g]*Cylinder Height*(Density of Metal-Density of Core)

Metallostatic Forces Acting on Moulding Flasks

Go Metallostatic Force = [g]*Density of Metal*Projected Area in Parting Plane*Head of Molten Metal

Density of Core Material

Go Density of Core = Density of Metal-Buoyant Force/(Volume of the Core*[g])

Volume of Core

Go Volume of the Core = Buoyant Force/(9.81*(Density of Metal-Density of Core))

Density of Molten Metal

Go Density of Metal = Buoyant Force/(Volume of the Core*9.81)+Density of Core

Buoyant Force on Cores

Go Buoyant Force = 9.81*Volume of the Core*(Density of Metal-Density of Core)

Chaplet Area

Go Chaplet Area = 29*(Buoyant Force-Empirical Constant*Core Print Area)

Unsupported Load for Cores

Go Unsupported Load = Buoyant Force-Empirical Constant*Core Print Area

Buoyant Force on Cores from Chaplet Area

Go Buoyant Force = Chaplet Area/29+Empirical Constant*Core Print Area

Empirical Relation for Max. Permissible Buoyancy Force on given Core Print Area

Go Buoyant Force = Empirical Constant*Core Print Area

Empirical Relation for Minimum Core Print Area

Go Core Print Area = Buoyant Force/Empirical Constant

Chaplet Area from Unsupported Load

Go Chaplet Area = 29*Unsupported Load

Buoyant Force on Cores from Chaplet Area Formula

Buoyant Force = Chaplet Area/29+Empirical Constant*Core Print Area
F_b = a/29+c*A

What are chaplets?

Chaplets are metallic supports often kept inside the mould cavity to support the cores. These are of the same composition as that of the pouring metal so that the molten metal would provide enough heat to completely melt them and thus fuse with it during solidification.

How to Calculate Buoyant Force on Cores from Chaplet Area?

Buoyant Force on Cores from Chaplet Area calculator uses Buoyant Force = Chaplet Area/29+Empirical Constant*Core Print Area to calculate the Buoyant Force, The buoyant force on cores from chaplet area" is the upward force exerted on the core by the molten metal during the pouring of the mold. This force is caused by the displacement of the molten metal by the core. Buoyant Force is denoted by F_b symbol.

How to calculate Buoyant Force on Cores from Chaplet Area using this online calculator? To use this online calculator for Buoyant Force on Cores from Chaplet Area, enter Chaplet Area (a), Empirical Constant (c) & Core Print Area (A) and hit the calculate button. Here is how the Buoyant Force on Cores from Chaplet Area calculation can be explained with given input values -> 2550 = 2900/29+350000000*4E-06.

FAQ

What is Buoyant Force on Cores from Chaplet Area?

The buoyant force on cores from chaplet area" is the upward force exerted on the core by the molten metal during the pouring of the mold. This force is caused by the displacement of the molten metal by the core and is represented as F_b = a/29+c*A or Buoyant Force = Chaplet Area/29+Empirical Constant*Core Print Area. Chaplet Area is the surface area of a chaplet, a metal support used in casting to prevent deformation or distortion of the casting mold, Empirical Constant is the constant used in an empirical relation. It can vary depending on the specific casting material and they are derived from data obtained from actual casting operations & Core print area is the area of that part of the mould which supports the weight of core used in casting.

How to calculate Buoyant Force on Cores from Chaplet Area?

The buoyant force on cores from chaplet area" is the upward force exerted on the core by the molten metal during the pouring of the mold. This force is caused by the displacement of the molten metal by the core is calculated using Buoyant Force = Chaplet Area/29+Empirical Constant*Core Print Area. To calculate Buoyant Force on Cores from Chaplet Area, you need Chaplet Area (a), Empirical Constant (c) & Core Print Area (A). With our tool, you need to enter the respective value for Chaplet Area, Empirical Constant & Core Print Area and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Buoyant Force?

In this formula, Buoyant Force uses Chaplet Area, Empirical Constant & Core Print Area. We can use 4 other way(s) to calculate the same, which is/are as follows -

Buoyant Force = 9.81*Volume of the Core*(Density of Metal-Density of Core)
Buoyant Force = pi/4*Diameter of Cylinder^2*[g]*Cylinder Height*(Density of Metal-Density of Core)
Buoyant Force = (pi/4*(Diameter of Core Print^2-Diameter of Cylinder^2)*Height of Core Print*Density of Metal-Volume of the Core*Density of Core)*[g]
Buoyant Force = Empirical Constant*Core Print Area

Home

FREE PDFs

🔍 Search