Capacity of Crankcase when Quantity of Oil is Determined Solution

STEP 0: Pre-Calculation Summary
Formula Used
Crankcase Capacity = 5*Time between Change of Oil*(Quantity of Oil-(Engine power*Operating Factor*0.0027/0.74))
C = 5*t*(Q-(HP*η*0.0027/0.74))
This formula uses 5 Variables
Variables Used
Crankcase Capacity - (Measured in Liter) - Crankcase capacity is the housing for the crankshaft in a reciprocating internal combustion engine.
Time between Change of Oil - (Measured in Hour) - The Time between Change of Oil here refers to the time taken or the number of hours taken between the change of oil.
Quantity of Oil - (Measured in Liter per hour) - Quantity of Oil is the amount of oil or lubricating oil that is needed as fuel for machines.
Engine power - (Measured in Horsepower) - Engine power is the power that the engine can put out.
Operating Factor - Operating Factor is the ratio of time worked to reference time.
STEP 1: Convert Input(s) to Base Unit
Time between Change of Oil: 100 Hour --> 100 Hour No Conversion Required
Quantity of Oil: 0.41 Liter per hour --> 0.41 Liter per hour No Conversion Required
Engine power: 160 Horsepower --> 160 Horsepower No Conversion Required
Operating Factor: 0.6 --> No Conversion Required
STEP 2: Evaluate Formula
Substituting Input Values in Formula
C = 5*t*(Q-(HP*η*0.0027/0.74)) --> 5*100*(0.41-(160*0.6*0.0027/0.74))
Evaluating ... ...
C = 29.8648648648649
STEP 3: Convert Result to Output's Unit
0.0298648648648649 Cubic Meter -->29.8648648648649 Liter (Check conversion here)
FINAL ANSWER
29.8648648648649 29.86486 Liter <-- Crankcase Capacity
(Calculation completed in 00.004 seconds)

Credits

Created by Chandana P Dev
NSS College of Engineering (NSSCE), Palakkad
Chandana P Dev has created this Calculator and 500+ more calculators!
Verified by Mithila Muthamma PA
Coorg Institute of Technology (CIT), Coorg
Mithila Muthamma PA has verified this Calculator and 700+ more calculators!

11 Management of Construction Equipment Calculators

Average Investment if Salvage Value is not 0
Go Average Investment = (Salvage*(Useful Life-1)+Capital Cost*(Useful Life+1))/(2*Useful Life)
Horsepower given Quantity of Oil
Go Engine power = (Quantity of Oil-(Crankcase Capacity/(5*Time between Change of Oil)))*(0.74/(0.0027*Operating Factor))
Quantity of Lubricating Oil
Go Quantity of Oil = (Engine power*Operating Factor*0.0027/0.74)+(Crankcase Capacity/(5*Time between Change of Oil))
Capacity of Crankcase when Quantity of Oil is Determined
Go Crankcase Capacity = 5*Time between Change of Oil*(Quantity of Oil-(Engine power*Operating Factor*0.0027/0.74))
Average Investment when Salvage value is 0
Go Average Investment = ((1+Useful Life)/(2*Useful Life))*Capital Cost
Capital Cost when Salvage Value is 0
Go Capital Cost = (2*Useful Life*Average Investment)/(1+Useful Life)
Depreciation Cost when Straight Line Method is Assumed
Go Depreciation = (Total Cost-Scrap Value)/Useful Life
Book Value for New Machine
Go Book Value = (Hourly Depreciation*Life Span)/0.9
Life Span of Machine
Go Life Span = 0.9*Book Value/Hourly Depreciation
Hourly Depreciation
Go Hourly Depreciation = 0.9*Book Value/Life Span
Hourly Cost Worker
Go Hourly Cost = 12*Monthly Salary/Machine Hours

Capacity of Crankcase when Quantity of Oil is Determined Formula

Crankcase Capacity = 5*Time between Change of Oil*(Quantity of Oil-(Engine power*Operating Factor*0.0027/0.74))
C = 5*t*(Q-(HP*η*0.0027/0.74))

What are the factors affecting the Cost of Owning and Operating the Construction Equipment?

The different major costs contributing to the cost of owning and operating construction equipment are as follows:
1. Depreciation Cost
2. Investment Cost
3. Maintenance and Repair Cost
4. Operation Costs
a. Repair charges
b. Depreciation on tyres and tubes
c. Labour charges
d. Fuel charges
e. Operation and maintenance crew charges
f. Miscellaneous supplies
5. Downtime Cost
6. Obsolescence Cost
7. Replacement Cost

How to Calculate Capacity of Crankcase when Quantity of Oil is Determined?

Capacity of Crankcase when Quantity of Oil is Determined calculator uses Crankcase Capacity = 5*Time between Change of Oil*(Quantity of Oil-(Engine power*Operating Factor*0.0027/0.74)) to calculate the Crankcase Capacity, The Capacity of Crankcase when Quantity of Oil is Determined formula is defined as the housing for the crankshaft in a reciprocating internal combustion engine. In most modern engines, the crankcase is integrated into the engine. Crankcase Capacity is denoted by C symbol.

How to calculate Capacity of Crankcase when Quantity of Oil is Determined using this online calculator? To use this online calculator for Capacity of Crankcase when Quantity of Oil is Determined, enter Time between Change of Oil (t), Quantity of Oil (Q), Engine power (HP) & Operating Factor (η) and hit the calculate button. Here is how the Capacity of Crankcase when Quantity of Oil is Determined calculation can be explained with given input values -> 29864.86 = 5*360000*(1.13888888888889E-07-(119311.97952*0.6*0.0027/0.74)).

FAQ

What is Capacity of Crankcase when Quantity of Oil is Determined?
The Capacity of Crankcase when Quantity of Oil is Determined formula is defined as the housing for the crankshaft in a reciprocating internal combustion engine. In most modern engines, the crankcase is integrated into the engine and is represented as C = 5*t*(Q-(HP*η*0.0027/0.74)) or Crankcase Capacity = 5*Time between Change of Oil*(Quantity of Oil-(Engine power*Operating Factor*0.0027/0.74)). The Time between Change of Oil here refers to the time taken or the number of hours taken between the change of oil, Quantity of Oil is the amount of oil or lubricating oil that is needed as fuel for machines, Engine power is the power that the engine can put out & Operating Factor is the ratio of time worked to reference time.
How to calculate Capacity of Crankcase when Quantity of Oil is Determined?
The Capacity of Crankcase when Quantity of Oil is Determined formula is defined as the housing for the crankshaft in a reciprocating internal combustion engine. In most modern engines, the crankcase is integrated into the engine is calculated using Crankcase Capacity = 5*Time between Change of Oil*(Quantity of Oil-(Engine power*Operating Factor*0.0027/0.74)). To calculate Capacity of Crankcase when Quantity of Oil is Determined, you need Time between Change of Oil (t), Quantity of Oil (Q), Engine power (HP) & Operating Factor (η). With our tool, you need to enter the respective value for Time between Change of Oil, Quantity of Oil, Engine power & Operating Factor and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!