Change in Temperature given Elongation in Pipes Calculator

✖The Elongation is change in length due to subjected load.ⓘ Elongation [∆]			+10% -10%
✖Initial Length before the application of load.ⓘ Initial Length [l₀]			+10% -10%
✖Thermal Expansion Coefficient is a material property that is indicative of the extent to which a material expands upon heating.ⓘ Thermal Expansion Coefficient [α]			+10% -10%

✖The Change in Temperature is the difference between the initial and final temperature.ⓘ Change in Temperature given Elongation in Pipes [∆T]

⎘ Copy

👎

Formula

✖

Change in Temperature given Elongation in Pipes

Formula

`"∆T" = "∆"/("l"_{"0"}*"α")`

Example

`"50K"="0.375mm"/("5000mm"*"0.0000015K⁻¹")`

Calculator

LaTeX

Reset

👍

Download Environmental Engineering Formula PDF

Change in Temperature given Elongation in Pipes Solution

STEP 0: Pre-Calculation Summary

Formula Used

Change in Temperature = Elongation/(Initial Length*Thermal Expansion Coefficient)
∆T = ∆/(l₀*α)
This formula uses 4 Variables

Variables Used

Change in Temperature - (Measured in Kelvin) - The Change in Temperature is the difference between the initial and final temperature.
Elongation - (Measured in Meter) - The Elongation is change in length due to subjected load.
Initial Length - (Measured in Meter) - Initial Length before the application of load.
Thermal Expansion Coefficient - (Measured in 1 Per Kelvin) - Thermal Expansion Coefficient is a material property that is indicative of the extent to which a material expands upon heating.

STEP 1: Convert Input(s) to Base Unit

Elongation: 0.375 Millimeter --> 0.000375 Meter (Check conversion here)
Initial Length: 5000 Millimeter --> 5 Meter (Check conversion here)
Thermal Expansion Coefficient: 1.5E-06 1 Per Kelvin --> 1.5E-06 1 Per Kelvin No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

∆T = ∆/(l₀*α) --> 0.000375/(5*1.5E-06)

Evaluating ... ...

∆T = 50

STEP 3: Convert Result to Output's Unit

50 Kelvin --> No Conversion Required

FINAL ANSWER

50 Kelvin <-- Change in Temperature

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Civil » Environmental Engineering » Sewers their Construction , Maintenance and Required Appurtenances » Pressure Due to External Loads » Change in Temperature given Elongation in Pipes

Credits

Created by Suraj Kumar

Birsa Institute of Technology (BIT), Sindri

Suraj Kumar has created this Calculator and 2200+ more calculators!

Verified by Ishita Goyal

Meerut Institute of Engineering and Technology (MIET), Meerut

Ishita Goyal has verified this Calculator and 2600+ more calculators!

< 16 Pressure Due to External Loads Calculators

Distance of Top of Pipe to below Surface of Fill given Unit Pressure

Go Distance between pipe and fill = ((Unit Pressure*2*pi*(Slant Height)^5)/(3*Superimposed load))^(1/3)

Slant Height of considered Point given Unit Pressure

Go Slant Height = ((3*Superimposed load*(Distance between pipe and fill)^3)/(2*pi*Unit Pressure))^(1/5)

Unit Pressure Developed at any Point in Fill at Depth

Go Unit Pressure = (3*(Distance between pipe and fill)^3*Superimposed load)/(2*pi*(Slant Height)^5)

Superimposed Load given Unit Pressure

Go Superimposed load = (2*pi*Unit Pressure*(Slant Height)^5)/(3*(Distance between pipe and fill)^3)

External Diameter of Pipe given Load Per Unit Length for Pipes

Go External diameter = sqrt(Load per unit Length/(Pipe coefficient*Specific Weight of Fill))

Pipe Coefficient given Load Per Unit Length for Pipes

Go Pipe coefficient = (Load per unit Length/(Specific Weight of Fill*(External diameter)^2))

Specific Weight of Fill Material given Load Per Unit Length for Pipes

Go Specific Weight of Fill = Load per unit Length/(Pipe coefficient*(External diameter)^2)

Load Per Unit Length for Pipes Resting on Undisturbed Ground on Cohesion Less Soil

Go Load per unit Length = Pipe coefficient*Specific Weight of Fill*(External diameter)^2

Coefficient of Thermal Expansion given Elongation in Pipes

Go Thermal Expansion Coefficient = Elongation/(Initial Length*Change in Temperature)

Coefficient of Expansion of Material given Stress in Pipe

Go Coefficient of Thermal Expansion = Stress/(Change in Temperature*Elastic Modulus)

Change in Temperature given Elongation in Pipes

Go Change in Temperature = Elongation/(Initial Length*Thermal Expansion Coefficient)

Change in Temperature given Stress in Pipe

Go Change in Temperature = Stress/(Coefficient of Thermal Expansion*Elastic Modulus)

Load Per Unit Length for Pipes given Compressive Stress

Go Load per unit Length = (Compressive Stress*Thickness)-Total Load per Unit Length

Compressive Stress Produced when Pipe is Empty

Go Compressive Stress = (Load per unit Length+Total Load per Unit Length)/Thickness

Thickness of Pipes given Compressive Stress

Go Thickness = (Total Load per Unit Length+Load per unit Length)/Compressive Stress

Elongation in Pipes given Change in Temperature

Go Elongation = Initial Length*Thermal Expansion Coefficient*Change in Temperature

Change in Temperature given Elongation in Pipes Formula

Change in Temperature = Elongation/(Initial Length*Thermal Expansion Coefficient)
∆T = ∆/(l₀*α)

What is change in temperature ?

A process whereby the degree of hotness of a body (or medium) changes. advection - (meteorology) the horizontal transfer of heat or other atmospheric properties. climate change, global climate change - a change in the world's climate.

How to Calculate Change in Temperature given Elongation in Pipes?

Change in Temperature given Elongation in Pipes calculator uses Change in Temperature = Elongation/(Initial Length*Thermal Expansion Coefficient) to calculate the Change in Temperature, The Change in Temperature given Elongation in Pipes is defined as a process whereby the degree of hotness of a body (or medium) changes. Change in Temperature is denoted by ∆T symbol.

How to calculate Change in Temperature given Elongation in Pipes using this online calculator? To use this online calculator for Change in Temperature given Elongation in Pipes, enter Elongation (∆), Initial Length (l₀) & Thermal Expansion Coefficient (α) and hit the calculate button. Here is how the Change in Temperature given Elongation in Pipes calculation can be explained with given input values -> 50 = 0.000375/(5*1.5E-06).

FAQ

What is Change in Temperature given Elongation in Pipes?

The Change in Temperature given Elongation in Pipes is defined as a process whereby the degree of hotness of a body (or medium) changes and is represented as ∆T = ∆/(l₀*α) or Change in Temperature = Elongation/(Initial Length*Thermal Expansion Coefficient). The Elongation is change in length due to subjected load, Initial Length before the application of load & Thermal Expansion Coefficient is a material property that is indicative of the extent to which a material expands upon heating.

How to calculate Change in Temperature given Elongation in Pipes?

The Change in Temperature given Elongation in Pipes is defined as a process whereby the degree of hotness of a body (or medium) changes is calculated using Change in Temperature = Elongation/(Initial Length*Thermal Expansion Coefficient). To calculate Change in Temperature given Elongation in Pipes, you need Elongation (∆), Initial Length (l₀) & Thermal Expansion Coefficient (α). With our tool, you need to enter the respective value for Elongation, Initial Length & Thermal Expansion Coefficient and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Change in Temperature?

In this formula, Change in Temperature uses Elongation, Initial Length & Thermal Expansion Coefficient. We can use 1 other way(s) to calculate the same, which is/are as follows -

Change in Temperature = Stress/(Coefficient of Thermal Expansion*Elastic Modulus)

Home

FREE PDFs

🔍 Search