## Coefficient of Friction between Cylinder and Surface of Inclined Plane for Rolling without Slipping Solution

STEP 0: Pre-Calculation Summary
Formula Used
Coefficient of Friction = (tan(Angle of Inclination))/3
μ = (tan(θi))/3
This formula uses 1 Functions, 2 Variables
Functions Used
tan - The tangent of an angle is a trigonometric ratio of the length of the side opposite an angle to the length of the side adjacent to an angle in a right triangle., tan(Angle)
Variables Used
Coefficient of Friction - The Coefficient of Friction (μ) is the ratio defining the force that resists the motion of one body in relation to another body in contact with it.
Angle of Inclination - (Measured in Radian) - Angle of Inclination is formed by the inclination of one line to another; measured in degrees or radians.
STEP 1: Convert Input(s) to Base Unit
Angle of Inclination: 45 Degree --> 0.785398163397301 Radian (Check conversion ​here)
STEP 2: Evaluate Formula
Substituting Input Values in Formula
μ = (tan(θi))/3 --> (tan(0.785398163397301))/3
Evaluating ... ...
μ = 0.333333333333235
STEP 3: Convert Result to Output's Unit
0.333333333333235 --> No Conversion Required
0.333333333333235 0.333333 <-- Coefficient of Friction
(Calculation completed in 00.004 seconds)
You are here -
Home »

## Credits

Created by Anshika Arya
National Institute Of Technology (NIT), Hamirpur
Anshika Arya has created this Calculator and 2000+ more calculators!
Verified by Team Softusvista
Softusvista Office (Pune), India
Team Softusvista has verified this Calculator and 1100+ more calculators!

## <Friction Calculators

Frictional Force between Cylinder and Inclined Plane surface for Rolling without Slipping
​ Go Force of Friction = (Mass of Cylinder*Acceleration due to Gravity*sin(Angle of Inclination))/3
Coefficient of Friction between Cylinder and Surface of Inclined Plane for Rolling without Slipping
​ Go Coefficient of Friction = (tan(Angle of Inclination))/3

## <Angle Friction Calculators

Efficiency of Inclined Plane when Effort Applied Horizontally to Move Body Downward
​ Go Efficiency of Inclined Plane = tan(Angle of Inclination of Plane to Horizontal-Limiting Angle of Friction)/tan(Angle of Inclination of Plane to Horizontal)
Efficiency of Inclined Plane when Effort Applied Horizontally to Move Body Upward
​ Go Efficiency of Inclined Plane = tan(Angle of Inclination of Plane to Horizontal)/tan(Angle of Inclination of Plane to Horizontal+Limiting Angle of Friction)
Angle of Repose
​ Go Angle of Repose = atan(Limiting Force/Normal Reaction)
Coefficient of Friction between Cylinder and Surface of Inclined Plane for Rolling without Slipping
​ Go Coefficient of Friction = (tan(Angle of Inclination))/3

## Coefficient of Friction between Cylinder and Surface of Inclined Plane for Rolling without Slipping Formula

Coefficient of Friction = (tan(Angle of Inclination))/3
μ = (tan(θi))/3

## How do you calculate the coefficient of friction?

The coefficient of friction (fr) is a number that is the ratio of the resistive force of friction (Fr) divided by the normal or perpendicular force (N) pushing the objects together. It is represented by the equation: fr = Fr/N.

## What is the largest coefficient of friction?

They being said, aluminum on aluminum when both surfaces are clean, smooth, and dry has a coefficient of static friction of between 1.05 and 1.35. That's higher than unity and extremely rare. It's about as high as it gets.

## How to Calculate Coefficient of Friction between Cylinder and Surface of Inclined Plane for Rolling without Slipping?

Coefficient of Friction between Cylinder and Surface of Inclined Plane for Rolling without Slipping calculator uses Coefficient of Friction = (tan(Angle of Inclination))/3 to calculate the Coefficient of Friction, The Coefficient of Friction between cylinder and surface of inclined plane for rolling without slipping is the ratio defining the force that resists the motion of one body in relation to another body in contact with it. This ratio is dependent on material properties and most materials have a value between 0 and 1. Coefficient of Friction is denoted by μ symbol.

How to calculate Coefficient of Friction between Cylinder and Surface of Inclined Plane for Rolling without Slipping using this online calculator? To use this online calculator for Coefficient of Friction between Cylinder and Surface of Inclined Plane for Rolling without Slipping, enter Angle of Inclination i) and hit the calculate button. Here is how the Coefficient of Friction between Cylinder and Surface of Inclined Plane for Rolling without Slipping calculation can be explained with given input values -> 0.030336 = (tan(0.785398163397301))/3.

### FAQ

What is Coefficient of Friction between Cylinder and Surface of Inclined Plane for Rolling without Slipping?
The Coefficient of Friction between cylinder and surface of inclined plane for rolling without slipping is the ratio defining the force that resists the motion of one body in relation to another body in contact with it. This ratio is dependent on material properties and most materials have a value between 0 and 1 and is represented as μ = (tan(θi))/3 or Coefficient of Friction = (tan(Angle of Inclination))/3. Angle of Inclination is formed by the inclination of one line to another; measured in degrees or radians.
How to calculate Coefficient of Friction between Cylinder and Surface of Inclined Plane for Rolling without Slipping?
The Coefficient of Friction between cylinder and surface of inclined plane for rolling without slipping is the ratio defining the force that resists the motion of one body in relation to another body in contact with it. This ratio is dependent on material properties and most materials have a value between 0 and 1 is calculated using Coefficient of Friction = (tan(Angle of Inclination))/3. To calculate Coefficient of Friction between Cylinder and Surface of Inclined Plane for Rolling without Slipping, you need Angle of Inclination i). With our tool, you need to enter the respective value for Angle of Inclination and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
Let Others Know