Coefficient of Permeability given Flow Velocity Solution

STEP 0: Pre-Calculation Summary
Formula Used
Coefficient of Permeability in Well Hydraulics = (Flow Velocity/Hydraulic Gradient in Envi. Engi.)
KWH = (Vfwh/ie)
This formula uses 3 Variables
Variables Used
Coefficient of Permeability in Well Hydraulics - (Measured in Meter per Second) - Coefficient of Permeability in Well Hydraulics of soil in well hydraulics describes how easily a liquid will move through the soil.
Flow Velocity - (Measured in Meter per Second) - Flow Velocity is the velocity of the flow of any fluid.
Hydraulic Gradient in Envi. Engi. - Hydraulic Gradient in Envi. Engi. is a specific measurement of liquid pressure above a vertical datum.
STEP 1: Convert Input(s) to Base Unit
Flow Velocity: 1.12 Meter per Second --> 1.12 Meter per Second No Conversion Required
Hydraulic Gradient in Envi. Engi.: 17.01 --> No Conversion Required
STEP 2: Evaluate Formula
Substituting Input Values in Formula
KWH = (Vfwh/ie) --> (1.12/17.01)
Evaluating ... ...
KWH = 0.065843621399177
STEP 3: Convert Result to Output's Unit
0.065843621399177 Meter per Second -->6.5843621399177 Centimeter per Second (Check conversion ​here)
FINAL ANSWER
6.5843621399177 6.584362 Centimeter per Second <-- Coefficient of Permeability in Well Hydraulics
(Calculation completed in 00.004 seconds)

Credits

Creator Image
Created by Suraj Kumar
Birsa Institute of Technology (BIT), Sindri
Suraj Kumar has created this Calculator and 2200+ more calculators!
Verifier Image
Verified by Ishita Goyal
Meerut Institute of Engineering and Technology (MIET), Meerut
Ishita Goyal has verified this Calculator and 2600+ more calculators!

8 Coefficient of Permeability Calculators

Coefficient of Permeability given Discharge of Two Wells under Consideration
​ Go Coefficient of Permeability in Well Hydraulics = Discharge/((pi*(Depth of Water 2^2-Depth of Water 1^2))/(log((Radial Distance at Observation Well 2/Observation Well 1 Radial Distance),e)))
Coefficient of Permeability given Discharge and Length of Strainer
​ Go Coefficient of Permeability in Well Hydraulics = Discharge/((2.72*Total Drawdown in Well in Well Hydraulics*(Strainer Length+(Total Drawdown in Well in Well Hydraulics/2)))/(log((Radius of Influence/Radius of well),10)))
Coefficient of Permeability given Discharge in Unconfined Aquifer
​ Go Coefficient of Permeability in Well Hydraulics = Discharge/((pi*(Thickness of Unconfined Aquifer^2-Depth of Water^2))/(log((Radius of Influence/Radius of well),e)))
Coefficient of Permeability given Discharge from Two Wells with Base 10
​ Go Coefficient of Permeability in Well Hydraulics = Discharge/((1.36*(Depth of Water 2^2-Depth of Water 1^2))/(log((Radial Distance at Observation Well 2/Radial Distance at Well 1),10)))
Coefficient of Permeability given Discharge in Unconfined Aquifer with Base 10
​ Go Coefficient of Permeability in Well Hydraulics = Discharge/((1.36*(Aquifer Thickness^2-Depth of Water in Well^2))/(log((Radius of Influence/Radius of well),10)))
Coefficient of Permeability given Rate of Flow
​ Go Coefficient of Permeability = (Discharge/(Hydraulic Gradient in Envi. Engi.*Area of Cross Section in Enviro. Engin.))
Coefficient of Permeability given Radius of Influence
​ Go Coefficient of Permeability of Soil Particle = (Radius of Influence/(3000*Total Drawdown in Well))^2
Coefficient of Permeability given Flow Velocity
​ Go Coefficient of Permeability in Well Hydraulics = (Flow Velocity/Hydraulic Gradient in Envi. Engi.)

Coefficient of Permeability given Flow Velocity Formula

Coefficient of Permeability in Well Hydraulics = (Flow Velocity/Hydraulic Gradient in Envi. Engi.)
KWH = (Vfwh/ie)

What is Coefficient of Permeability?

The coefficient of permeability of a soil describes how easily a liquid will move through a soil. It is also commonly referred to as the hydraulic conductivity of a soil. This factor can be affected by the viscosity, or thickness(fluidity) of a liquid and its density.

How to Calculate Coefficient of Permeability given Flow Velocity?

Coefficient of Permeability given Flow Velocity calculator uses Coefficient of Permeability in Well Hydraulics = (Flow Velocity/Hydraulic Gradient in Envi. Engi.) to calculate the Coefficient of Permeability in Well Hydraulics, The Coefficient of Permeability given Flow Velocity is defined as the hydraulic conductivity of soil. Coefficient of Permeability in Well Hydraulics is denoted by KWH symbol.

How to calculate Coefficient of Permeability given Flow Velocity using this online calculator? To use this online calculator for Coefficient of Permeability given Flow Velocity, enter Flow Velocity (Vfwh) & Hydraulic Gradient in Envi. Engi. (ie) and hit the calculate button. Here is how the Coefficient of Permeability given Flow Velocity calculation can be explained with given input values -> 658.4362 = (1.12/17.01).

FAQ

What is Coefficient of Permeability given Flow Velocity?
The Coefficient of Permeability given Flow Velocity is defined as the hydraulic conductivity of soil and is represented as KWH = (Vfwh/ie) or Coefficient of Permeability in Well Hydraulics = (Flow Velocity/Hydraulic Gradient in Envi. Engi.). Flow Velocity is the velocity of the flow of any fluid & Hydraulic Gradient in Envi. Engi. is a specific measurement of liquid pressure above a vertical datum.
How to calculate Coefficient of Permeability given Flow Velocity?
The Coefficient of Permeability given Flow Velocity is defined as the hydraulic conductivity of soil is calculated using Coefficient of Permeability in Well Hydraulics = (Flow Velocity/Hydraulic Gradient in Envi. Engi.). To calculate Coefficient of Permeability given Flow Velocity, you need Flow Velocity (Vfwh) & Hydraulic Gradient in Envi. Engi. (ie). With our tool, you need to enter the respective value for Flow Velocity & Hydraulic Gradient in Envi. Engi and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
How many ways are there to calculate Coefficient of Permeability in Well Hydraulics?
In this formula, Coefficient of Permeability in Well Hydraulics uses Flow Velocity & Hydraulic Gradient in Envi. Engi. We can use 5 other way(s) to calculate the same, which is/are as follows -
  • Coefficient of Permeability in Well Hydraulics = Discharge/((pi*(Thickness of Unconfined Aquifer^2-Depth of Water^2))/(log((Radius of Influence/Radius of well),e)))
  • Coefficient of Permeability in Well Hydraulics = Discharge/((1.36*(Aquifer Thickness^2-Depth of Water in Well^2))/(log((Radius of Influence/Radius of well),10)))
  • Coefficient of Permeability in Well Hydraulics = Discharge/((pi*(Depth of Water 2^2-Depth of Water 1^2))/(log((Radial Distance at Observation Well 2/Observation Well 1 Radial Distance),e)))
  • Coefficient of Permeability in Well Hydraulics = Discharge/((1.36*(Depth of Water 2^2-Depth of Water 1^2))/(log((Radial Distance at Observation Well 2/Radial Distance at Well 1),10)))
  • Coefficient of Permeability in Well Hydraulics = Discharge/((2.72*Total Drawdown in Well in Well Hydraulics*(Strainer Length+(Total Drawdown in Well in Well Hydraulics/2)))/(log((Radius of Influence/Radius of well),10)))
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!