Compressive Stress in Pin Inside Eye of Knuckle Joint given Load and Pin Dimensions Calculator

✖Load on Knuckle Joint is basically the amount of load/force any part, product, or joint of a knuckle joint can bear or is acted upon or exerts.ⓘ Load on Knuckle Joint [L]			+10% -10%
✖Thickess of Eye of Knuckle Joint is the thickness of the eye of the nonforked part of the knuckle joint, measured perpendicular to the eye hole radius.ⓘ Thickess of Eye of Knuckle Joint [b]			+10% -10%
✖Diameter of Knuckle Pin is the diameter of the pin used in joining the eye end and the fork of a knuckle joint.ⓘ Diameter of Knuckle Pin [d]			+10% -10%

✖Compressive Stress in Knuckle Pin is the compressive stress induced into the pin of a knuckle joint, the force per unit area tending to cause deformation of the pin.ⓘ Compressive Stress in Pin Inside Eye of Knuckle Joint given Load and Pin Dimensions [σ_c]

⎘ Copy

👎

Formula

✖

Compressive Stress in Pin Inside Eye of Knuckle Joint given Load and Pin Dimensions

Formula

`"σ"_{"c"} = "L"/("b"*"d")`

Example

`"33.78378N/mm²"="50000N"/("40mm"*"37mm")`

Calculator

LaTeX

Reset

👍

Download Eye Formulas PDF PDF Image

Compressive Stress in Pin Inside Eye of Knuckle Joint given Load and Pin Dimensions Solution

STEP 0: Pre-Calculation Summary

Formula Used

Compressive Stress in Knuckle Pin = Load on Knuckle Joint/(Thickess of Eye of Knuckle Joint*Diameter of Knuckle Pin)
σ_c = L/(b*d)
This formula uses 4 Variables

Variables Used

Compressive Stress in Knuckle Pin - (Measured in Pascal) - Compressive Stress in Knuckle Pin is the compressive stress induced into the pin of a knuckle joint, the force per unit area tending to cause deformation of the pin.
Load on Knuckle Joint - (Measured in Newton) - Load on Knuckle Joint is basically the amount of load/force any part, product, or joint of a knuckle joint can bear or is acted upon or exerts.
Thickess of Eye of Knuckle Joint - (Measured in Meter) - Thickess of Eye of Knuckle Joint is the thickness of the eye of the nonforked part of the knuckle joint, measured perpendicular to the eye hole radius.
Diameter of Knuckle Pin - (Measured in Meter) - Diameter of Knuckle Pin is the diameter of the pin used in joining the eye end and the fork of a knuckle joint.

STEP 1: Convert Input(s) to Base Unit

Load on Knuckle Joint: 50000 Newton --> 50000 Newton No Conversion Required
Thickess of Eye of Knuckle Joint: 40 Millimeter --> 0.04 Meter (Check conversion here)
Diameter of Knuckle Pin: 37 Millimeter --> 0.037 Meter (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

σ_c = L/(b*d) --> 50000/(0.04*0.037)

Evaluating ... ...

σ_c = 33783783.7837838

STEP 3: Convert Result to Output's Unit

33783783.7837838 Pascal -->33.7837837837838 Newton per Square Millimeter (Check conversion here)

FINAL ANSWER

33.7837837837838 ≈ 33.78378 Newton per Square Millimeter <-- Compressive Stress in Knuckle Pin

(Calculation completed in 00.004 seconds)

You are here -

Home » Physics » Design of Machine Elements » Design of Coupling » Design of Knuckle Joint » Eye » Compressive Stress in Pin Inside Eye of Knuckle Joint given Load and Pin Dimensions

Credits

Created by Saurabh Patil

Shri Govindram Seksaria Institute of Technology and Science (SGSITS ), Indore

Saurabh Patil has created this Calculator and 700+ more calculators!

Verified by Anshika Arya

National Institute Of Technology (NIT), Hamirpur

Anshika Arya has verified this Calculator and 2500+ more calculators!

< 16 Eye Calculators

Bending Stress in Knuckle Pin given Load, Thickness of Eyes and Pin Diameter

Go Bending Stress in Knuckle Pin = (32*Load on Knuckle Joint/2*(Thickess of Eye of Knuckle Joint/4+Thickess of Fork Eye of Knuckle Joint/3))/(pi*Diameter of Knuckle Pin^3)

Thickness of Eye End of Knuckle Joint given Bending Stress in Pin

Go Thickess of Eye of Knuckle Joint = 4*((pi*Diameter of Knuckle Pin^3*Bending Stress in Knuckle Pin)/(16*Load on Knuckle Joint)-Thickess of Fork Eye of Knuckle Joint/3)

Tensile Stress in Fork of Knuckle Joint given Load, Outer Diameter of Eye and Pin Diameter

Go Tensile Stress in Fork of Knuckle Joint = Load on Knuckle Joint/(2*Thickess of Fork Eye of Knuckle Joint*(Outer Diameter of Eye of Knuckle Joint-Diameter of Knuckle Pin))

Shear Stress in Fork of Knuckle Joint given Load, Outer Diameter of Eye and Pin Diameter

Go Shear Stress in Fork of Knuckle Joint = Load on Knuckle Joint/(2*Thickess of Fork Eye of Knuckle Joint*(Outer Diameter of Eye of Knuckle Joint-Diameter of Knuckle Pin))

Tensile Stress in Eye of Knuckle Joint given Load, Outer Diameter of Eye and its Thickness

Go Tensile Stress in Eye of Knuckle Joint = Load on Knuckle Joint/(Thickess of Eye of Knuckle Joint*(Outer Diameter of Eye of Knuckle Joint-Diameter of Knuckle Pin))

Thickness of Eye End of Knuckle Joint given Tensile Stress in Eye

Go Thickess of Eye of Knuckle Joint = Load on Knuckle Joint/(Tensile Stress in Eye of Knuckle Joint*(Outer Diameter of Eye of Knuckle Joint-Diameter of Knuckle Pin))

Shear Stress in Eye of Knuckle Joint given Load, Outer Diameter of Eye and its Thickness

Go Shear Stress in Eye of Knuckle Joint = Load on Knuckle Joint/(Thickess of Eye of Knuckle Joint*(Outer Diameter of Eye of Knuckle Joint-Diameter of Knuckle Pin))

Thickness of Eye End of Knuckle Joint given Shear Stress in Eye

Go Thickess of Eye of Knuckle Joint = Load on Knuckle Joint/(Shear Stress in Eye of Knuckle Joint*(Outer Diameter of Eye of Knuckle Joint-Diameter of Knuckle Pin))

Max Bending Moment in Knuckle Pin given Load, Thickness of Eye and Fork

Go Bending Moment in Knuckle Pin = Load on Knuckle Joint/2*(Thickess of Eye of Knuckle Joint/4+Thickess of Fork Eye of Knuckle Joint/3)

Thickness of Eye End of Knuckle Joint given Bending Moment in Pin

Go Thickess of Eye of Knuckle Joint = 4*(2*Bending Moment in Knuckle Pin/Load on Knuckle Joint-Thickess of Fork Eye of Knuckle Joint/3)

Compressive Stress in Pin Inside Fork of Knuckle Joint given Load and Pin Dimensions

Go Compressive Stress in Knuckle Pin = Load on Knuckle Joint/(2*Thickess of Fork Eye of Knuckle Joint*Diameter of Knuckle Pin)

Compressive Stress in Pin Inside Eye of Knuckle Joint given Load and Pin Dimensions

Go Compressive Stress in Knuckle Pin = Load on Knuckle Joint/(Thickess of Eye of Knuckle Joint*Diameter of Knuckle Pin)

Tensile Stress in Rod of Knuckle Joint

Go Tensile Stress in Knuckle Joint Rod = (4*Load on Knuckle Joint)/(pi*Diameter of Rod of Knuckle Joint^2)

Bending Stress in Knuckle Pin given Bending Moment in Pin

Go Bending Stress in Knuckle Pin = (32*Bending Moment in Knuckle Pin)/(pi*Diameter of Knuckle Pin^3)

Shear Stress in Pin of Knuckle Joint given Load and Pin Diameter

Go Shear Stress in Knuckle Pin = (2*Load on Knuckle Joint)/(pi*Diameter of Knuckle Pin^2)

Thickness of Eye of Knuckle Joint given Rod Diameter

Go Thickess of Eye of Knuckle Joint = 1.25*Diameter of Rod of Knuckle Joint

Compressive Stress in Pin Inside Eye of Knuckle Joint given Load and Pin Dimensions Formula

Compressive Stress in Knuckle Pin = Load on Knuckle Joint/(Thickess of Eye of Knuckle Joint*Diameter of Knuckle Pin)
σ_c = L/(b*d)

What is a mechanical joint?

A mechanical joint is a section of a machine that is used to connect one or more mechanical parts to another. Mechanical joints may be temporary or permanent, most types are designed to be disassembled. Most mechanical joints are designed to allow relative movement of these mechanical parts of the machine in one degree of freedom, and restrict movement in one or more others.

How to Calculate Compressive Stress in Pin Inside Eye of Knuckle Joint given Load and Pin Dimensions?

Compressive Stress in Pin Inside Eye of Knuckle Joint given Load and Pin Dimensions calculator uses Compressive Stress in Knuckle Pin = Load on Knuckle Joint/(Thickess of Eye of Knuckle Joint*Diameter of Knuckle Pin) to calculate the Compressive Stress in Knuckle Pin, The Compressive stress in pin inside eye of knuckle joint given load and pin dimensions is the crushing stress or the compressive stress inside the knuckle pin due to the load acting between the pin and the eye. Compressive Stress in Knuckle Pin is denoted by σ_c symbol.

How to calculate Compressive Stress in Pin Inside Eye of Knuckle Joint given Load and Pin Dimensions using this online calculator? To use this online calculator for Compressive Stress in Pin Inside Eye of Knuckle Joint given Load and Pin Dimensions, enter Load on Knuckle Joint (L), Thickess of Eye of Knuckle Joint (b) & Diameter of Knuckle Pin (d) and hit the calculate button. Here is how the Compressive Stress in Pin Inside Eye of Knuckle Joint given Load and Pin Dimensions calculation can be explained with given input values -> 3.4E-5 = 50000/(0.04*0.037).

FAQ

What is Compressive Stress in Pin Inside Eye of Knuckle Joint given Load and Pin Dimensions?

The Compressive stress in pin inside eye of knuckle joint given load and pin dimensions is the crushing stress or the compressive stress inside the knuckle pin due to the load acting between the pin and the eye and is represented as σ_c = L/(b*d) or Compressive Stress in Knuckle Pin = Load on Knuckle Joint/(Thickess of Eye of Knuckle Joint*Diameter of Knuckle Pin). Load on Knuckle Joint is basically the amount of load/force any part, product, or joint of a knuckle joint can bear or is acted upon or exerts, Thickess of Eye of Knuckle Joint is the thickness of the eye of the nonforked part of the knuckle joint, measured perpendicular to the eye hole radius & Diameter of Knuckle Pin is the diameter of the pin used in joining the eye end and the fork of a knuckle joint.

How to calculate Compressive Stress in Pin Inside Eye of Knuckle Joint given Load and Pin Dimensions?

The Compressive stress in pin inside eye of knuckle joint given load and pin dimensions is the crushing stress or the compressive stress inside the knuckle pin due to the load acting between the pin and the eye is calculated using Compressive Stress in Knuckle Pin = Load on Knuckle Joint/(Thickess of Eye of Knuckle Joint*Diameter of Knuckle Pin). To calculate Compressive Stress in Pin Inside Eye of Knuckle Joint given Load and Pin Dimensions, you need Load on Knuckle Joint (L), Thickess of Eye of Knuckle Joint (b) & Diameter of Knuckle Pin (d). With our tool, you need to enter the respective value for Load on Knuckle Joint, Thickess of Eye of Knuckle Joint & Diameter of Knuckle Pin and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Compressive Stress in Knuckle Pin?

In this formula, Compressive Stress in Knuckle Pin uses Load on Knuckle Joint, Thickess of Eye of Knuckle Joint & Diameter of Knuckle Pin. We can use 1 other way(s) to calculate the same, which is/are as follows -

Compressive Stress in Knuckle Pin = Load on Knuckle Joint/(2*Thickess of Fork Eye of Knuckle Joint*Diameter of Knuckle Pin)

Home

FREE PDFs

🔍 Search