Conversion Factor given Flow Velocity Calculator

✖The Flow Velocity refers to the speed at which a fluid (such as water) moves through a specific cross-section.ⓘ Flow Velocity [V_f]			+10% -10%
✖The Roughness Coefficient of Conduit Surface refers to the roughness or irregularity of the inner surface of a conduit through which fluid flows.ⓘ Roughness Coefficient of Conduit Surface [n_c]			+10% -10%
✖The Energy Loss refers to the dissipation or reduction of energy within a system or process.ⓘ Energy Loss [S]			+10% -10%
✖The Hydraulic Radius refers to the ratio of the cross-sectional area of a channel or pipe in which a fluid is flowing to the wet perimeter of the conduit.ⓘ Hydraulic Radius [r_H]			+10% -10%

✖Conversion Factor is a numerical coefficient used to convert one set of units to another.ⓘ Conversion Factor given Flow Velocity [C]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Flow Velocity in Straight Sewers Formulas PDF PDF Image

Conversion Factor given Flow Velocity Solution

STEP 0: Pre-Calculation Summary

Formula Used

Conversion Factor = ((Flow Velocity*Roughness Coefficient of Conduit Surface)/((Energy Loss^(1/2))*Hydraulic Radius^(2/3)))
C = ((V_f*n_c)/((S^(1/2))*r_H^(2/3)))
This formula uses 5 Variables

Variables Used

Conversion Factor - Conversion Factor is a numerical coefficient used to convert one set of units to another.
Flow Velocity - (Measured in Meter per Second) - The Flow Velocity refers to the speed at which a fluid (such as water) moves through a specific cross-section.
Roughness Coefficient of Conduit Surface - The Roughness Coefficient of Conduit Surface refers to the roughness or irregularity of the inner surface of a conduit through which fluid flows.
Energy Loss - (Measured in Joule) - The Energy Loss refers to the dissipation or reduction of energy within a system or process.
Hydraulic Radius - (Measured in Meter) - The Hydraulic Radius refers to the ratio of the cross-sectional area of a channel or pipe in which a fluid is flowing to the wet perimeter of the conduit.

STEP 1: Convert Input(s) to Base Unit

Flow Velocity: 1.12 Meter per Second --> 1.12 Meter per Second No Conversion Required
Roughness Coefficient of Conduit Surface: 0.017 --> No Conversion Required
Energy Loss: 2 Joule --> 2 Joule No Conversion Required
Hydraulic Radius: 0.33 Meter --> 0.33 Meter No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

C = ((V_f*n_c)/((S^(1/2))*r_H^(2/3))) --> ((1.12*0.017)/((2^(1/2))*0.33^(2/3)))

Evaluating ... ...

C = 0.0281930883922611

STEP 3: Convert Result to Output's Unit

0.0281930883922611 --> No Conversion Required

FINAL ANSWER

0.0281930883922611 ≈ 0.028193 <-- Conversion Factor

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Civil » Environmental Engineering » Flow Velocity in Straight Sewers » Conversion Factor given Flow Velocity

Credits

Created by Mridul Sharma

Indian Institute of Information Technology (IIIT), Bhopal

Mridul Sharma has created this Calculator and 200+ more calculators!

Verified by Ishita Goyal

Meerut Institute of Engineering and Technology (MIET), Meerut

Ishita Goyal has verified this Calculator and 2600+ more calculators!

< Flow Velocity in Straight Sewers Calculators

Hydraulic Radius given Flow Velocity

LaTeX Go Hydraulic Radius = ((Flow Velocity*Roughness Coefficient of Conduit Surface)/(Conversion Factor*Energy Loss^(1/2)))^(3/2)

Roughness Coefficient using Flow Velocity

LaTeX Go Roughness Coefficient of Conduit Surface = (Conversion Factor*Hydraulic Radius^(2/3)*Energy Loss^(1/2))/Flow Velocity

Flow Velocity using Manning's formula

LaTeX Go Flow Velocity = (Conversion Factor*Hydraulic Radius^(2/3)*Energy Loss^(1/2))/Roughness Coefficient of Conduit Surface

Energy Loss given Flow Velocity

LaTeX Go Energy Loss = ((Flow Velocity*Roughness Coefficient of Conduit Surface)/(Conversion Factor*Hydraulic Radius^(2/3)))^2

Conversion Factor given Flow Velocity Formula

LaTeX Go

Conversion Factor = ((Flow Velocity*Roughness Coefficient of Conduit Surface)/((Energy Loss^(1/2))*Hydraulic Radius^(2/3)))
C = ((V_f*n_c)/((S^(1/2))*r_H^(2/3)))

What is Hydraulic Radius?

hydraulic radius is the ratio of the cross-sectional area of a channel or pipe in which a fluid is flowing to the wet perimeter of the conduit.

How to Calculate Conversion Factor given Flow Velocity?

Conversion Factor given Flow Velocity calculator uses Conversion Factor = ((Flow Velocity*Roughness Coefficient of Conduit Surface)/((Energy Loss^(1/2))*Hydraulic Radius^(2/3))) to calculate the Conversion Factor, The Conversion Factor given Flow Velocity is defined as the conversion factor to account for change from metric units used in development of the formula when we have a prior info of flow velocity. Conversion Factor is denoted by C symbol.

How to calculate Conversion Factor given Flow Velocity using this online calculator? To use this online calculator for Conversion Factor given Flow Velocity, enter Flow Velocity (V_f), Roughness Coefficient of Conduit Surface (n_c), Energy Loss (S) & Hydraulic Radius (r_H) and hit the calculate button. Here is how the Conversion Factor given Flow Velocity calculation can be explained with given input values -> 0.028193 = ((1.12*0.017)/((2^(1/2))*0.33^(2/3))).

FAQ

What is Conversion Factor given Flow Velocity?

The Conversion Factor given Flow Velocity is defined as the conversion factor to account for change from metric units used in development of the formula when we have a prior info of flow velocity and is represented as C = ((V_f*n_c)/((S^(1/2))*r_H^(2/3))) or Conversion Factor = ((Flow Velocity*Roughness Coefficient of Conduit Surface)/((Energy Loss^(1/2))*Hydraulic Radius^(2/3))). The Flow Velocity refers to the speed at which a fluid (such as water) moves through a specific cross-section, The Roughness Coefficient of Conduit Surface refers to the roughness or irregularity of the inner surface of a conduit through which fluid flows, The Energy Loss refers to the dissipation or reduction of energy within a system or process & The Hydraulic Radius refers to the ratio of the cross-sectional area of a channel or pipe in which a fluid is flowing to the wet perimeter of the conduit.

How to calculate Conversion Factor given Flow Velocity?

The Conversion Factor given Flow Velocity is defined as the conversion factor to account for change from metric units used in development of the formula when we have a prior info of flow velocity is calculated using Conversion Factor = ((Flow Velocity*Roughness Coefficient of Conduit Surface)/((Energy Loss^(1/2))*Hydraulic Radius^(2/3))). To calculate Conversion Factor given Flow Velocity, you need Flow Velocity (V_f), Roughness Coefficient of Conduit Surface (n_c), Energy Loss (S) & Hydraulic Radius (r_H). With our tool, you need to enter the respective value for Flow Velocity, Roughness Coefficient of Conduit Surface, Energy Loss & Hydraulic Radius and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search