Crater Depth for Sintered-Carbide Tools Calculator

✖Tool Wear Crater Depth is the wear that happens on Tool Surface in which contact with chips erodes the rake face.ⓘ Crater Depth for Sintered-Carbide Tools [K_T]

⎘ Copy

👎

Formula

✖

Crater Depth for Sintered-Carbide Tools

Formula

`"K"_{"T"} = 0.06+0.3*"f"`

Example

`"60.21mm"=0.06+0.3*"0.70mm/rev"`

Calculator

LaTeX

Reset

👍

Download Production Engineering Formula PDF PDF Image

Crater Depth for Sintered-Carbide Tools Solution

STEP 0: Pre-Calculation Summary

Formula Used

Tool Wear Crater Depth = 0.06+0.3*Feed Rate
K_T = 0.06+0.3*f
This formula uses 2 Variables

Variables Used

Tool Wear Crater Depth - (Measured in Meter) - Tool Wear Crater Depth is the wear that happens on Tool Surface in which contact with chips erodes the rake face.
Feed Rate - (Measured in Meter Per Revolution) - Feed Rate is defined as the tool's distance travelled during one spindle revolution.

STEP 1: Convert Input(s) to Base Unit

Feed Rate: 0.7 Millimeter Per Revolution --> 0.0007 Meter Per Revolution (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

K_T = 0.06+0.3*f --> 0.06+0.3*0.0007

Evaluating ... ...

K_T = 0.06021

STEP 3: Convert Result to Output's Unit

0.06021 Meter -->60.21 Millimeter (Check conversion here)

FINAL ANSWER

60.21 Millimeter <-- Tool Wear Crater Depth

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Production Engineering » Metal Machining » Machine Tools and Operations » Tool Life and Tool Wear » Cutting Velocity » Crater Depth for Sintered-Carbide Tools

Credits

Created by Kumar Siddhant

Indian Institute of Information Technology, Design and Manufacturing (IIITDM), Jabalpur

Kumar Siddhant has created this Calculator and 400+ more calculators!

Verified by Parul Keshav

National Institute of Technology (NIT), Srinagar

Parul Keshav has verified this Calculator and 400+ more calculators!

< 13 Cutting Velocity Calculators

Cutting Velocity for given Taylor's Tool Life

Go Cutting Velocity = Taylor's Intercept or Taylor's Constant/((Tool Life^Taylor's Tool Life Exponent)*(Feed Rate^Taylor's exponent for Feed Rate)*(Depth of Cut^Taylor's exponent for Depth of Cut))

Taylor's Exponent given Cutting Velocities, Tool Lives for two Machining Conditions

Go Taylor's Tool Life Exponent = (-1)*ln(Cutting Velocity/Reference Cutting Velocity)/ln(Tool Life/Reference Tool Life)

Reference Cutting Velocity given Tool Lives, Cutting Velocity under Machining Condition

Go Reference Cutting Velocity = Cutting Velocity/((Reference Tool Life/Tool Life)^Taylor's Tool Life Exponent)

Cutting Velocity given Tool Lives and Cutting Velocity for Reference Machining Condition

Go Cutting Velocity = Reference Cutting Velocity*(Reference Tool Life/Tool Life)^Taylor's Tool Life Exponent

Cutting Velocity for given Tool Life and Volume of Metal Removed

Go Cutting Velocity = Volume of Metal Removed/(Tool Life*Feed Rate*Depth of Cut)

Taylor's Intercept given Cutting Velocity and Taylor's Tool Life

Go Taylor's Intercept or Taylor's Constant = Taylor Cutting Velocity*(Tool Life^Taylor's Tool Life Exponent)

Cutting Velocity using Taylor's Tool Life and Intercept

Go Taylor Cutting Velocity = Taylor's Intercept or Taylor's Constant/(Tool Life^Taylor's Tool Life Exponent)

Resultant Cutting Velocity

Go Resultant Cutting Velocity = Cutting Velocity/cos((Cutting Speed Angle))

Cutting Speed of Free-Cutting Steel given Cutting Velocity of Tool and Machinability Index

Go Cutting Speed of Free-Cutting Steel = Cutting Velocity*100/Machinability Index of a Material

Cutting Velocity using Machinability Index

Go Cutting Velocity = Machinability Index of a Material*Cutting Speed of Free-Cutting Steel/100

Machinability Index

Go Machinability Index of a Material = Cutting Velocity*100/Cutting Speed of Free-Cutting Steel

Feed for Sintered-Carbide Tools using Crater Depth

Go Feed Rate = (Tool Wear Crater Depth-0.06)/0.3

Crater Depth for Sintered-Carbide Tools

Go Tool Wear Crater Depth = 0.06+0.3*Feed Rate

Crater Depth for Sintered-Carbide Tools Formula

Tool Wear Crater Depth = 0.06+0.3*Feed Rate
K_T = 0.06+0.3*f

Measurement of Crater Depth

The Tool Wear Crater Depth happens due to friction and heat between the newly formed Chip and the Rake Surface of the Tool. This amount of Cratering varies along the active cutting edge of the tool. Hence the Crater Depth is measured at the deepest point of the crater.

How to Calculate Crater Depth for Sintered-Carbide Tools?

Crater Depth for Sintered-Carbide Tools calculator uses Tool Wear Crater Depth = 0.06+0.3*Feed Rate to calculate the Tool Wear Crater Depth, The Crater Depth for Sintered-Carbide Tools is the wear that happens on the surface of the Tool made out of Sintered-Carbide, due to constant friction and heat between the Chip formed and Tool Rake Surface. Tool Wear Crater Depth is denoted by K_T symbol.

How to calculate Crater Depth for Sintered-Carbide Tools using this online calculator? To use this online calculator for Crater Depth for Sintered-Carbide Tools, enter Feed Rate (f) and hit the calculate button. Here is how the Crater Depth for Sintered-Carbide Tools calculation can be explained with given input values -> 60210 = 0.06+0.3*0.0007.

FAQ

What is Crater Depth for Sintered-Carbide Tools?

The Crater Depth for Sintered-Carbide Tools is the wear that happens on the surface of the Tool made out of Sintered-Carbide, due to constant friction and heat between the Chip formed and Tool Rake Surface and is represented as K_T = 0.06+0.3*f or Tool Wear Crater Depth = 0.06+0.3*Feed Rate. Feed Rate is defined as the tool's distance travelled during one spindle revolution.

How to calculate Crater Depth for Sintered-Carbide Tools?

The Crater Depth for Sintered-Carbide Tools is the wear that happens on the surface of the Tool made out of Sintered-Carbide, due to constant friction and heat between the Chip formed and Tool Rake Surface is calculated using Tool Wear Crater Depth = 0.06+0.3*Feed Rate. To calculate Crater Depth for Sintered-Carbide Tools, you need Feed Rate (f). With our tool, you need to enter the respective value for Feed Rate and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search