Credits

national institute of technology hamirpur (NITH ), hamirpur , himachal pradesh
sanjay shiva has created this Calculator and 25+ more calculators!
National Institute Of Technology (NIT), Hamirpur
Anshika Arya has verified this Calculator and 1600+ more calculators!

Deflection of conical spring Solution

STEP 0: Pre-Calculation Summary
Formula Used
deflection_of_conical_spring = .0123*(Actual mean diameter of conical spring)^2/Actual diameter of wire
y = .0123*(Dam)^2/da
This formula uses 2 Variables
Variables Used
Actual mean diameter of conical spring - Actual mean diameter of conical spring is a straight line passing from side to side through the centre of spring. (Measured in Meter)
Actual diameter of wire - Actual diameter of wire is straight line passing from side to side through wire. (Measured in Meter)
STEP 1: Convert Input(s) to Base Unit
Actual mean diameter of conical spring: 1 Meter --> 1 Meter No Conversion Required
Actual diameter of wire: 2 Meter --> 2 Meter No Conversion Required
STEP 2: Evaluate Formula
Substituting Input Values in Formula
y = .0123*(Dam)^2/da --> .0123*(1)^2/2
Evaluating ... ...
y = 0.00615
STEP 3: Convert Result to Output's Unit
0.00615 Meter --> No Conversion Required
FINAL ANSWER
0.00615 Meter <-- Deflection of conical spring
(Calculation completed in 00.000 seconds)

10+ Single spring installations Calculators

Actual diameter of spring wire in terms of actual mean diameter of conical spring
actual_diameter_of_wire = 2*(Actual mean diameter of conical spring+Outer diameter-(Nominal packing cross section/2)) Go
Outer diameter of spring wire in terms of actual mean diameter of conical spring
outer_diameter = Actual mean diameter of conical spring-(1/2)*(Nominal packing cross section+Actual diameter of wire) Go
Nominal packing cross section in terms of actual mean diameter of conical spring
nominal_packing_cross_section = 2*(Actual mean diameter of conical spring+Outer diameter-(Actual diameter of wire/2)) Go
Actual mean diameter of conical spring
actual_mean_diameter_of_conical_spring = Outer diameter-(1/2)*(Nominal packing cross section+Actual diameter of wire) Go
Deflection of conical spring
deflection_of_conical_spring = .0123*(Actual mean diameter of conical spring)^2/Actual diameter of wire Go
Inside diameter of member in terms of mean diameter of conical spring
inside_diameter = Mean diameter of conical spring-((3/2)*Nominal packing cross section) Go
Mean diameter of conical spring
mean_diameter_of_conical_spring = Inside diameter+((3/2)*Nominal packing cross section) Go
Nominal packing cross section in terms of mean diameter of conical spring
nominal_packing_cross_section = (Mean diameter of conical spring-Inside diameter)*2/3 Go
Diameter of wire for spring in terms of mean diameter of conical spring
diameter = ((pi*(Mean diameter of conical spring)^2)/139300)^1/3 Go
Mean diameter of conical spring in terms of diameter of spring wire
mean_diameter_of_conical_spring = (((Diameter)^3*139300)/pi)^1/2 Go

Deflection of conical spring Formula

deflection_of_conical_spring = .0123*(Actual mean diameter of conical spring)^2/Actual diameter of wire
y = .0123*(Dam)^2/da

What is Deflection of conical spring?

Deflection of conical spring is defined as how a spring responds when force is applied or released.compression spring compresses one inch for every 200 pounds of load applied to it, its deflection rate is 200 lbs. per inch.

How to Calculate Deflection of conical spring?

Deflection of conical spring calculator uses deflection_of_conical_spring = .0123*(Actual mean diameter of conical spring)^2/Actual diameter of wire to calculate the Deflection of conical spring, The Deflection of conical spring formula is defined as how a spring responds when force is applied or released. Deflection of conical spring is denoted by y symbol.

How to calculate Deflection of conical spring using this online calculator? To use this online calculator for Deflection of conical spring, enter Actual mean diameter of conical spring (Dam) & Actual diameter of wire (da) and hit the calculate button. Here is how the Deflection of conical spring calculation can be explained with given input values -> 0.00615 = .0123*(1)^2/2.

FAQ

What is Deflection of conical spring?
The Deflection of conical spring formula is defined as how a spring responds when force is applied or released and is represented as y = .0123*(Dam)^2/da or deflection_of_conical_spring = .0123*(Actual mean diameter of conical spring)^2/Actual diameter of wire. Actual mean diameter of conical spring is a straight line passing from side to side through the centre of spring & Actual diameter of wire is straight line passing from side to side through wire.
How to calculate Deflection of conical spring?
The Deflection of conical spring formula is defined as how a spring responds when force is applied or released is calculated using deflection_of_conical_spring = .0123*(Actual mean diameter of conical spring)^2/Actual diameter of wire. To calculate Deflection of conical spring, you need Actual mean diameter of conical spring (Dam) & Actual diameter of wire (da). With our tool, you need to enter the respective value for Actual mean diameter of conical spring & Actual diameter of wire and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
How many ways are there to calculate Deflection of conical spring?
In this formula, Deflection of conical spring uses Actual mean diameter of conical spring & Actual diameter of wire. We can use 10 other way(s) to calculate the same, which is/are as follows -
  • mean_diameter_of_conical_spring = Inside diameter+((3/2)*Nominal packing cross section)
  • inside_diameter = Mean diameter of conical spring-((3/2)*Nominal packing cross section)
  • nominal_packing_cross_section = (Mean diameter of conical spring-Inside diameter)*2/3
  • diameter = ((pi*(Mean diameter of conical spring)^2)/139300)^1/3
  • mean_diameter_of_conical_spring = (((Diameter)^3*139300)/pi)^1/2
  • actual_mean_diameter_of_conical_spring = Outer diameter-(1/2)*(Nominal packing cross section+Actual diameter of wire)
  • outer_diameter = Actual mean diameter of conical spring-(1/2)*(Nominal packing cross section+Actual diameter of wire)
  • nominal_packing_cross_section = 2*(Actual mean diameter of conical spring+Outer diameter-(Actual diameter of wire/2))
  • actual_diameter_of_wire = 2*(Actual mean diameter of conical spring+Outer diameter-(Nominal packing cross section/2))
  • deflection_of_conical_spring = .0123*(Actual mean diameter of conical spring)^2/Actual diameter of wire
Share Image
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!