Credits

National Institute Of Technology (NIT), Hamirpur
Anshika Arya has created this Calculator and 1000+ more calculators!
Birsa Institute of Technology (BIT), Sindri
Payal Priya has verified this Calculator and 1000+ more calculators!

Density of material in terms of radial stress in a solid disc Solution

STEP 0: Pre-Calculation Summary
Formula Used
density = (((Constant at boundary condition/2)-Radial Stress)*8)/((Angular velocity^2)*(Radius^2)*(3+Poisson's ratio))
ρ = (((C1/2)-fr)*8)/((ω^2)*(r^2)*(3+𝛎))
This formula uses 5 Variables
Variables Used
Constant at boundary condition- Constant at boundary condition is value obtained for stress in solid disc.
Radial Stress - Radial Stress induced by a bending moment in a member of constant cross section. (Measured in Pascal)
Angular velocity- The angular velocity refers to how fast an object rotates or revolves relative to another point, i.e. how fast the angular position or orientation of an object changes with time.
Radius - Radius is a radial line from the focus to any point of a curve. (Measured in Centimeter)
Poisson's ratio- Poisson's ratio is defined as the ratio of the lateral and axial strain. For many metals and alloys, values of Poisson’s ratio range between 0.25 and 0.35.
STEP 1: Convert Input(s) to Base Unit
Constant at boundary condition: 5 --> No Conversion Required
Radial Stress: 100 Pascal --> 100 Pascal No Conversion Required
Angular velocity: 20 --> No Conversion Required
Radius: 18 Centimeter --> 0.18 Meter (Check conversion here)
Poisson's ratio: 0.3 --> No Conversion Required
STEP 2: Evaluate Formula
Substituting Input Values in Formula
ρ = (((C1/2)-fr)*8)/((ω^2)*(r^2)*(3+𝛎)) --> (((5/2)-100)*8)/((20^2)*(0.18^2)*(3+0.3))
Evaluating ... ...
ρ = -18.2379349046016
STEP 3: Convert Result to Output's Unit
-18.2379349046016 Kilogram per Meter³ --> No Conversion Required
FINAL ANSWER
-18.2379349046016 Kilogram per Meter³ <-- Density
(Calculation completed in 00.016 seconds)

10+ Expression For Stresses In A Solid Disc Calculators

Angular velocity of disc in terms of circumferential stress in a solid disc
angular_velocity_1 = sqrt((((Constant at boundary condition/2)-Circumferential stress)*8)/(Density*(Radius^2)*((3*Poisson's ratio)+1))) Go
Angular velocity of the disc in terms of radial stress in a solid disc
angular_velocity_1 = sqrt((((Constant at boundary condition/2)-Radial Stress)*8)/(Density*(Radius^2)*(3+Poisson's ratio))) Go
Radius of the disc in terms of radial stress in a solid disc
radius = sqrt((((Constant at boundary condition/2)-Radial Stress)*8)/(Density*(Angular velocity^2)*(3+Poisson's ratio))) Go
Density of material in terms of circumferential stress in a solid disc
density = (((Constant at boundary condition/2)-Circumferential stress)*8)/((Angular velocity^2)*(Radius^2)*((3*Poisson's ratio)+1)) Go
Constant at boundary condition in terms of circumferential stress in a solid disc
constant_at_boundary_condition = 2*(Circumferential stress+((Density*(Angular velocity^2)*(Radius^2)*((3*Poisson's ratio)+1))/8)) Go
Circumferential stress in a solid disc
circumferential_stress = (Constant at boundary condition/2)-((Density*(Angular velocity^2)*(Radius^2)*((3*Poisson's ratio)+1))/8) Go
Density of material in terms of radial stress in a solid disc
density = (((Constant at boundary condition/2)-Radial Stress)*8)/((Angular velocity^2)*(Radius^2)*(3+Poisson's ratio)) Go
Poisson's ratio in terms of radial stress in a solid disc
poissons_ratio = ((((Constant at boundary condition/2)-Radial Stress)*8)/(Density*(Angular velocity^2)*(Radius^2)))-3 Go
Constant at boundary condition in terms of radial stress in a solid disc
constant_at_boundary_condition = 2*(Radial Stress+((Density*(Angular velocity^2)*(Radius^2)*(3+Poisson's ratio))/8)) Go
Radial stress in a solid disc
radial_stress = (Constant at boundary condition/2)-((Density*(Angular velocity^2)*(Radius^2)*(3+Poisson's ratio))/8) Go

Density of material in terms of radial stress in a solid disc Formula

density = (((Constant at boundary condition/2)-Radial Stress)*8)/((Angular velocity^2)*(Radius^2)*(3+Poisson's ratio))
ρ = (((C1/2)-fr)*8)/((ω^2)*(r^2)*(3+𝛎))

What is radial and tangential stress?

The “Hoop Stress” or “Tangential Stress” acts on a line perpendicular to the “longitudinal “and the “radial stress;” this stress attempts to separate the pipe wall in the circumferential direction. This stress is caused by internal pressure.

How to Calculate Density of material in terms of radial stress in a solid disc?

Density of material in terms of radial stress in a solid disc calculator uses density = (((Constant at boundary condition/2)-Radial Stress)*8)/((Angular velocity^2)*(Radius^2)*(3+Poisson's ratio)) to calculate the Density, The Density of material in terms of radial stress in a solid disc formula is defined as a measure of mass per volume. An object made from a comparatively dense material (such as iron) will have less volume than an object of equal mass made from some less dense substance (such as water). Density and is denoted by ρ symbol.

How to calculate Density of material in terms of radial stress in a solid disc using this online calculator? To use this online calculator for Density of material in terms of radial stress in a solid disc, enter Constant at boundary condition (C1), Radial Stress (fr), Angular velocity (ω), Radius (r) and Poisson's ratio (𝛎) and hit the calculate button. Here is how the Density of material in terms of radial stress in a solid disc calculation can be explained with given input values -> -18.237935 = (((5/2)-100)*8)/((20^2)*(0.18^2)*(3+0.3)).

FAQ

What is Density of material in terms of radial stress in a solid disc?
The Density of material in terms of radial stress in a solid disc formula is defined as a measure of mass per volume. An object made from a comparatively dense material (such as iron) will have less volume than an object of equal mass made from some less dense substance (such as water) and is represented as ρ = (((C1/2)-fr)*8)/((ω^2)*(r^2)*(3+𝛎)) or density = (((Constant at boundary condition/2)-Radial Stress)*8)/((Angular velocity^2)*(Radius^2)*(3+Poisson's ratio)). Constant at boundary condition is value obtained for stress in solid disc, Radial Stress induced by a bending moment in a member of constant cross section, The angular velocity refers to how fast an object rotates or revolves relative to another point, i.e. how fast the angular position or orientation of an object changes with time, Radius is a radial line from the focus to any point of a curve and Poisson's ratio is defined as the ratio of the lateral and axial strain. For many metals and alloys, values of Poisson’s ratio range between 0.25 and 0.35.
How to calculate Density of material in terms of radial stress in a solid disc?
The Density of material in terms of radial stress in a solid disc formula is defined as a measure of mass per volume. An object made from a comparatively dense material (such as iron) will have less volume than an object of equal mass made from some less dense substance (such as water) is calculated using density = (((Constant at boundary condition/2)-Radial Stress)*8)/((Angular velocity^2)*(Radius^2)*(3+Poisson's ratio)). To calculate Density of material in terms of radial stress in a solid disc, you need Constant at boundary condition (C1), Radial Stress (fr), Angular velocity (ω), Radius (r) and Poisson's ratio (𝛎). With our tool, you need to enter the respective value for Constant at boundary condition, Radial Stress, Angular velocity, Radius and Poisson's ratio and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
How many ways are there to calculate Density?
In this formula, Density uses Constant at boundary condition, Radial Stress, Angular velocity, Radius and Poisson's ratio. We can use 10 other way(s) to calculate the same, which is/are as follows -
  • radial_stress = (Constant at boundary condition/2)-((Density*(Angular velocity^2)*(Radius^2)*(3+Poisson's ratio))/8)
  • constant_at_boundary_condition = 2*(Radial Stress+((Density*(Angular velocity^2)*(Radius^2)*(3+Poisson's ratio))/8))
  • density = (((Constant at boundary condition/2)-Radial Stress)*8)/((Angular velocity^2)*(Radius^2)*(3+Poisson's ratio))
  • angular_velocity_1 = sqrt((((Constant at boundary condition/2)-Radial Stress)*8)/(Density*(Radius^2)*(3+Poisson's ratio)))
  • radius = sqrt((((Constant at boundary condition/2)-Radial Stress)*8)/(Density*(Angular velocity^2)*(3+Poisson's ratio)))
  • poissons_ratio = ((((Constant at boundary condition/2)-Radial Stress)*8)/(Density*(Angular velocity^2)*(Radius^2)))-3
  • circumferential_stress = (Constant at boundary condition/2)-((Density*(Angular velocity^2)*(Radius^2)*((3*Poisson's ratio)+1))/8)
  • constant_at_boundary_condition = 2*(Circumferential stress+((Density*(Angular velocity^2)*(Radius^2)*((3*Poisson's ratio)+1))/8))
  • density = (((Constant at boundary condition/2)-Circumferential stress)*8)/((Angular velocity^2)*(Radius^2)*((3*Poisson's ratio)+1))
  • angular_velocity_1 = sqrt((((Constant at boundary condition/2)-Circumferential stress)*8)/(Density*(Radius^2)*((3*Poisson's ratio)+1)))
Where is the Density of material in terms of radial stress in a solid disc calculator used?
Among many, Density of material in terms of radial stress in a solid disc calculator is widely used in real life applications like {FormulaUses}. Here are few more real life examples -
{FormulaExamplesList}
Share Image
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!