Density of Water given Volume of Digested Sludge Solution

STEP 0: Pre-Calculation Summary
Formula Used
Water Density = (Weight of sludge)/(Sludge Volume*Specific Gravity of Sludge*Percent Solids)
ρwater = (Ws)/(Vs*Gs*%s)
This formula uses 5 Variables
Variables Used
Water Density - (Measured in Kilogram per Cubic Meter) - Water Density is mass per unit of water.
Weight of sludge - (Measured in Kilogram) - Weight of sludge is the force acting on the sludge due to gravity.
Sludge Volume - (Measured in Cubic Meter) - Sludge Volume is calculated by dividing the settleability by the MLSS concentration.
Specific Gravity of Sludge - Specific Gravity of Sludge is the ratio of the density of sludge to the density of standard compound.
Percent Solids - Percent Solids refer to the ratio of the solid mass of a material present in a liquid (or semi-liquid) sample.
STEP 1: Convert Input(s) to Base Unit
Weight of sludge: 20 Kilogram --> 20 Kilogram No Conversion Required
Sludge Volume: 10 Cubic Meter --> 10 Cubic Meter No Conversion Required
Specific Gravity of Sludge: 2 --> No Conversion Required
Percent Solids: 0.7 --> No Conversion Required
STEP 2: Evaluate Formula
Substituting Input Values in Formula
ρwater = (Ws)/(Vs*Gs*%s) --> (20)/(10*2*0.7)
Evaluating ... ...
ρwater = 1.42857142857143
STEP 3: Convert Result to Output's Unit
1.42857142857143 Kilogram per Cubic Meter --> No Conversion Required
FINAL ANSWER
1.42857142857143 1.428571 Kilogram per Cubic Meter <-- Water Density
(Calculation completed in 00.004 seconds)

Credits

Created by Suraj Kumar
Birsa Institute of Technology (BIT), Sindri
Suraj Kumar has created this Calculator and 2200+ more calculators!
Verified by Ishita Goyal
Meerut Institute of Engineering and Technology (MIET), Meerut
Ishita Goyal has verified this Calculator and 2600+ more calculators!

15 Design of an Aerobic Digester Calculators

Solids Retention Time given Volume of Aerobic Digester
Go Solids retention time = ((Influent average flow rate*Influent suspended solids)/(Volume of Aerobic Digester*Digester total suspended solids)-(Reaction rate constant*Volatile fraction))
Volume of Aerobic Digester
Go Volume of Aerobic Digester = (Influent average flow rate*Influent suspended solids)/(Digester total suspended solids*((Reaction rate constant*Volatile fraction)+Solids retention time))
Digester Total Suspended Solids given Volume of Aerobic Digester
Go Digester total suspended solids = (Influent average flow rate*Influent suspended solids)/(Volume of Aerobic Digester*(Reaction rate constant*Volatile fraction+Solids retention time))
Specific Gravity of Digested Sludge given Volume of Digested Sludge
Go Specific Gravity of Sludge = (Weight of sludge)/(Water Density*Sludge Volume*Percent Solids)
Density of Water given Volume of Digested Sludge
Go Water Density = (Weight of sludge)/(Sludge Volume*Specific Gravity of Sludge*Percent Solids)
Percent Solids given Volume of Digested Sludge
Go Percent Solids = (Weight of sludge)/(Sludge Volume*Water Density*Specific Gravity of Sludge)
Volume of Digested Sludge
Go Sludge Volume = (Weight of sludge)/(Water Density*Specific Gravity of Sludge*Percent Solids)
Weight of Sludge given Volume of Digested Sludge
Go Weight of sludge = (Water Density*Sludge Volume*Specific Gravity of Sludge*Percent Solids)
Initial Weight of Oxygen given Weight of Oxygen Required
Go Weight of initial oxygen = (Weight of oxygen*Volatile suspended solid weight)/(Volume of suspended solid*2.3)
VSS as Mass Flow Rate given Weight of Oxygen Required
Go Volume of suspended solid = (Weight of oxygen*Volatile suspended solid weight)/(2.3*Weight of initial oxygen)
Weight of VSS given Weight of Oxygen Required
Go Volatile suspended solid weight = (Volume of suspended solid*2.3*Weight of initial oxygen)/Weight of oxygen
Weight of Oxygen Required to Destroy VSS
Go Weight of oxygen = (Volume of suspended solid*2.3*Weight of initial oxygen)/Volatile suspended solid weight
Volume of Air Required at Standard Conditions
Go Volume of Air = (Weight of oxygen)/(Density of Air*0.232)
Density of Air given Volume of Air Required
Go Density of Air = (Weight of oxygen)/(Volume of Air*0.232)
Weight of Oxygen given Volume of Air
Go Weight of oxygen = (Volume of Air*Density of Air*0.232)

Density of Water given Volume of Digested Sludge Formula

Water Density = (Weight of sludge)/(Sludge Volume*Specific Gravity of Sludge*Percent Solids)
ρwater = (Ws)/(Vs*Gs*%s)

What is density of water ?

A common unit of measurement for water's density is gram per milliliter (1 g/ml) or 1 gram per cubic centimeter. Actually, the exact density of water is not really 1 g/ml, but rather a bit less (very, very little less), at 0.9998395 g/ml at 4.0° Celsius (39.2° Fahrenheit).

How to Calculate Density of Water given Volume of Digested Sludge?

Density of Water given Volume of Digested Sludge calculator uses Water Density = (Weight of sludge)/(Sludge Volume*Specific Gravity of Sludge*Percent Solids) to calculate the Water Density, The Density of Water given Volume of Digested Sludge calculates density of water when we know the values of sludge weight , volume and percent solids . Water Density is denoted by ρwater symbol.

How to calculate Density of Water given Volume of Digested Sludge using this online calculator? To use this online calculator for Density of Water given Volume of Digested Sludge, enter Weight of sludge (Ws), Sludge Volume (Vs), Specific Gravity of Sludge (Gs) & Percent Solids (%s) and hit the calculate button. Here is how the Density of Water given Volume of Digested Sludge calculation can be explained with given input values -> 1.428571 = (20)/(10*2*0.7).

FAQ

What is Density of Water given Volume of Digested Sludge?
The Density of Water given Volume of Digested Sludge calculates density of water when we know the values of sludge weight , volume and percent solids and is represented as ρwater = (Ws)/(Vs*Gs*%s) or Water Density = (Weight of sludge)/(Sludge Volume*Specific Gravity of Sludge*Percent Solids). Weight of sludge is the force acting on the sludge due to gravity, Sludge Volume is calculated by dividing the settleability by the MLSS concentration, Specific Gravity of Sludge is the ratio of the density of sludge to the density of standard compound & Percent Solids refer to the ratio of the solid mass of a material present in a liquid (or semi-liquid) sample.
How to calculate Density of Water given Volume of Digested Sludge?
The Density of Water given Volume of Digested Sludge calculates density of water when we know the values of sludge weight , volume and percent solids is calculated using Water Density = (Weight of sludge)/(Sludge Volume*Specific Gravity of Sludge*Percent Solids). To calculate Density of Water given Volume of Digested Sludge, you need Weight of sludge (Ws), Sludge Volume (Vs), Specific Gravity of Sludge (Gs) & Percent Solids (%s). With our tool, you need to enter the respective value for Weight of sludge, Sludge Volume, Specific Gravity of Sludge & Percent Solids and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!