Depression Head in Well at Time T after Pumping Stopped with Base 10 and Clay soil is Present Solution

STEP 0: Pre-Calculation Summary
Formula Used
Depression head = Depression head/10^((0.25*Time/3600)/2.303)
h2 = h1/10^((0.25*t/3600)/2.303)
This formula uses 3 Variables
Variables Used
Depression head - (Measured in Meter) - Depression head in the well at a time T after the pumping stopped.
Depression head - (Measured in Meter) - Depression head in the well when pumping stopped.
Time - (Measured in Second) - Time can be defined as the ongoing and continuous sequence of events that occur in succession, from the past through the present to the future.
STEP 1: Convert Input(s) to Base Unit
Depression head: 3 Meter --> 3 Meter No Conversion Required
Time: 4 Hour --> 14400 Second (Check conversion here)
STEP 2: Evaluate Formula
Substituting Input Values in Formula
h2 = h1/10^((0.25*t/3600)/2.303) --> 3/10^((0.25*14400/3600)/2.303)
Evaluating ... ...
h2 = 1.10383717219999
STEP 3: Convert Result to Output's Unit
1.10383717219999 Meter --> No Conversion Required
FINAL ANSWER
1.10383717219999 1.103837 Meter <-- Depression head
(Calculation completed in 00.004 seconds)

Credits

Created by Suraj Kumar
Birsa Institute of Technology (BIT), Sindri
Suraj Kumar has created this Calculator and 2200+ more calculators!
Verified by Ishita Goyal
Meerut Institute of Engineering and Technology (MIET), Meerut
Ishita Goyal has verified this Calculator and 2600+ more calculators!

11 Depression Head after Pumping Stopped Calculators

Depression Head in Well at Time T after Pumping Stopped with known Discharge and Time
Go Depression head = Depression head/(10^((Discharge*Time/3600)/(Cross-Sectional Area*Constant Depression Head*2.303)))
Depression Head in Well at Time T given Pumping Stopped and Constant
Go Depression head = Depression head/(exp((Constant*Time)/Cross-Sectional Area))
Depression Head in Well at Time T given Pumping Stopped and Constant with Base 10
Go Depression head = Depression head/(10^((Constant*Time)/(Cross-Sectional Area*2.303)))
Depression Head in Well at Time T after Pumping Stopped
Go Depression head = Depression head/exp(Specific Capacity*Time)
Depression Head in Well at Time T after Pumping Stopped with Base 10
Go Depression head = Depression head/10^((Specific Capacity*Time)/2.303)
Depression Head in Well at Time T after Pumping Stopped with Base 10 and Fine Sand is Present
Go Depression head = (Depression head/10^(((0.5)*(Time/3600)/2.303)))
Depression Head in Well at Time T after Pumping Stopped and Coarse Sand is Present
Go Depression head = (Depression head/10^((1/2.303)*(Time/3600)))
Depression Head in Well at Time T after Pumping Stopped with Base 10 and Clay soil is Present
Go Depression head = Depression head/10^((0.25*Time/3600)/2.303)
Depression Head in Well at Time T after Pumping Stopped and Fine Sand is Present
Go Depression head = Depression head/10^((0.5/2.303)*Time/3600)
Depression Head in Well at Time T after Pumping Stopped with Base 10 in Coarse Sand
Go Depression head = Depression head/10^((1*Time/3600)/2.303)
Depression Head in Well at Time T after Pumping Stopped and Clay Soil is Present
Go Depression head = Depression head/10^((0.25*Time/3600))

Depression Head in Well at Time T after Pumping Stopped with Base 10 and Clay soil is Present Formula

Depression head = Depression head/10^((0.25*Time/3600)/2.303)
h2 = h1/10^((0.25*t/3600)/2.303)

What is clay soil ?

Clay is a type of fine-grained natural soil material containing clay minerals. Clays develop plasticity when wet, due to a molecular film of water surrounding the clay particles, but become hard, brittle and non–plastic upon drying or firing.

How to Calculate Depression Head in Well at Time T after Pumping Stopped with Base 10 and Clay soil is Present?

Depression Head in Well at Time T after Pumping Stopped with Base 10 and Clay soil is Present calculator uses Depression head = Depression head/10^((0.25*Time/3600)/2.303) to calculate the Depression head, The Depression Head in Well at Time T after Pumping Stopped with Base 10 and Clay soil is Present calculates value of depression head in well when we have prior information of other parameters used. Depression head is denoted by h2 symbol.

How to calculate Depression Head in Well at Time T after Pumping Stopped with Base 10 and Clay soil is Present using this online calculator? To use this online calculator for Depression Head in Well at Time T after Pumping Stopped with Base 10 and Clay soil is Present, enter Depression head (h1) & Time (t) and hit the calculate button. Here is how the Depression Head in Well at Time T after Pumping Stopped with Base 10 and Clay soil is Present calculation can be explained with given input values -> 1.103837 = 3/10^((0.25*14400/3600)/2.303).

FAQ

What is Depression Head in Well at Time T after Pumping Stopped with Base 10 and Clay soil is Present?
The Depression Head in Well at Time T after Pumping Stopped with Base 10 and Clay soil is Present calculates value of depression head in well when we have prior information of other parameters used and is represented as h2 = h1/10^((0.25*t/3600)/2.303) or Depression head = Depression head/10^((0.25*Time/3600)/2.303). Depression head in the well when pumping stopped & Time can be defined as the ongoing and continuous sequence of events that occur in succession, from the past through the present to the future.
How to calculate Depression Head in Well at Time T after Pumping Stopped with Base 10 and Clay soil is Present?
The Depression Head in Well at Time T after Pumping Stopped with Base 10 and Clay soil is Present calculates value of depression head in well when we have prior information of other parameters used is calculated using Depression head = Depression head/10^((0.25*Time/3600)/2.303). To calculate Depression Head in Well at Time T after Pumping Stopped with Base 10 and Clay soil is Present, you need Depression head (h1) & Time (t). With our tool, you need to enter the respective value for Depression head & Time and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
How many ways are there to calculate Depression head?
In this formula, Depression head uses Depression head & Time. We can use 10 other way(s) to calculate the same, which is/are as follows -
  • Depression head = Depression head/exp(Specific Capacity*Time)
  • Depression head = Depression head/10^((Specific Capacity*Time)/2.303)
  • Depression head = Depression head/10^((0.25*Time/3600))
  • Depression head = Depression head/10^((0.5/2.303)*Time/3600)
  • Depression head = (Depression head/10^(((0.5)*(Time/3600)/2.303)))
  • Depression head = (Depression head/10^((1/2.303)*(Time/3600)))
  • Depression head = Depression head/10^((1*Time/3600)/2.303)
  • Depression head = Depression head/(exp((Constant*Time)/Cross-Sectional Area))
  • Depression head = Depression head/(10^((Constant*Time)/(Cross-Sectional Area*2.303)))
  • Depression head = Depression head/(10^((Discharge*Time/3600)/(Cross-Sectional Area*Constant Depression Head*2.303)))
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!